This device may have a jumper or switch that disables
software management of the device. When ConfigMode is
hardware(2), SNMP management is disabled, and all
configuration control comes from physical switches or
jumpers on the device.
There are no subdevices for this value, so the
placeholder value 1 is always used for that index.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmp110ConfigMode OBJECT-TYPE SYNTAX INTEGER { software(1), hardware(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This device may have a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP management is disabled, and all configuration control comes from physical switches or jumpers on the device. There are no subdevices for this value, so the placeholder value 1 is always used for that index." ::= { cpsmp110Entry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.10.1.1 | cpsmp110SubDeviceIndex | 0 | 0 | Generally, individual devices in this MIB are distinguished by BiaIndex and SlotIndex. This device differs from many in that it c… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.2 | cpsmp110BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed. There are no subdevices for this value, so the placeholde… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.3 | cpsmp110SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. There are no subdevices f… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.4 | cpsmp110Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.5 | cpsmp110MRevision | 0 | 0 | The marketing revision of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.6 | cpsmp110CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.7 | cpsmp110SerialNumber | 0 | 0 | The serial number of this device. There are no subdevices for this value, so the placeholder value 1 is always used for that inde… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.9 | cpsmp110MasterTempFault | 0 | 0 | The master temperature fault indicator for this device. A value of yes(1) indicates that at least one temperature sensor encounte… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.10 | cpsmp110MasterCurrentFault | 0 | 0 | The master current fault indicator for this device. A value of yes(1) indicates that at least one current sensor encountered a fa… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.11 | cpsmp110MasterFanFault | 0 | 0 | The master fan fault indicator for this device. A value of yes(1) indicates that at least one fan current sensor encountered a fa… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.12 | cpsmp110FirmwareRevision | 0 | 0 | The firmware revision level for this device. There are no subdevices for this value, so the placeholder value 1 is always used fo… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.13 | cpsmp110PSSupplyTbl | 0 | 0 | The supply voltage that this unit is designed to accept. If AC(1), the supply accepts VAC. If DC(2), the supply accepts. A single … |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.14 | cpsmp110PSRoleTbl | 0 | 0 | Some power supplies support a Master/Slave relationship: When one power supply is set to master(1) and the other is set to slave(… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.15 | cpsmp110PSReadyTbl | 0 | 0 | The readiness of this power supply module. A value of yes(1) indicates the module is ready to supply power to the cabinet. A val… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.16 | cpsmp110PSInUseTbl | 0 | 0 | The use status of this power supply module. A value of yes(1) indicates the module is supplying power to the cabinet. This variab… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.17 | cpsmp110TemperatureTbl | 0 | 0 | The temperature, in tenths of degrees centigrade, read by this temperature sensor. A single CPSMP110 control unit can support mul… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.18 | cpsmp110CurrentTbl | 0 | 0 | The current, in milliwatts, read by this current sensor. A single CPSMP110 control unit can support multiple subdevices of this t… |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.19 | cpsmp110FanStatusTbl | 0 | 0 | The status of a fan. A value of fault(2) indicates that the control unit has detected a problem with the fan, usually that it is … |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.20 | cpsmp110TempFaultTbl | 0 | 0 | Each entry in this column corresponds to an entry with the same indices in cpsmp110TemperatureTable. It indicates whether or not … |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.21 | cpsmp110CurrFaultTbl | 0 | 0 | Each entry in this column corresponds to an entry with the same indices in cpsmp110CurrentTable. It indicates whether or not the … |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.22 | cpsmp110PSCount | 0 | 0 | The maximum number of power supplies supported in this configuration. |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.23 | cpsmp110TempSensorCount | 0 | 0 | The number of temperature sensors supported in this device. |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.24 | cpsmp110CurrSensorCount | 0 | 0 | The number of current sensors supported in this device. |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.25 | cpsmp110FanCount | 0 | 0 | The number of fans supported in this device. |
1.3.6.1.4.1.868.2.4.1.2.2.10.1.26 | cpsmp110CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |