The serial number of this device
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cfetf100SerialNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of this device" ::= { cfetf100Entry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.868.2.4.1.2.2.4.1.1 | cfetf100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.2 | cfetf100SlotIndex | 0 | 0 | The slot in which the device is installed |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.3 | cfetf100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.4 | cfetf100MRevision | 0 | 0 | The marketing revision of this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.5 | cfetf100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.7 | cfetf100ConnA | 0 | 0 | The style of Fiber connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.8 | cfetf100ConnB | 0 | 0 | The style of Copper connector built into this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.9 | cfetf100TPLink | 0 | 0 | Status of Twisted Pair Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.10 | cfetf100FiberLink | 0 | 0 | Status of Fiber Link for this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.11 | cfetf100Fault | 0 | 0 | Value is yes(1) when either TPLink or FiberLink has value linkDown(2) |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.12 | cfetf100FastLinkPulse | 0 | 0 | When set to autonegotiate(1), converter sends Fast Link Pulses on its twisted pair port, thereby participating in autonegotiation… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.13 | cfetf100Enabled | 0 | 0 | When this configuration item is set to no(2), the device passes no network traffic. |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.14 | cfetf100Pause | 0 | 0 | The Pause feature allows Ethernet MACs that support it to send data pacing 'Pause' messages to each other. Support for Pause is n… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.15 | cfetf100LinkPassThrough | 0 | 0 | Enable/Disable for Link Pass Through, a feature that causes loss of link on one side of a media converter to be passed through to… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.16 | cfetf100AutoCross | 0 | 0 | Enable/Disable for automatic copper TX/RX pair correction. When disabled, the port operates in MDI mode. |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.17 | cfetf100TPActivity | 0 | 0 | Network traffic indicator for Copper side of this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.18 | cfetf100FiberActivity | 0 | 0 | Network traffic indicator for Fiber side of this device |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.19 | cfetf100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.20 | cfetf100FarEndFault | 0 | 0 | Far End Fault configuration of this device. This setting can only be changed by the physical jumper setting on the slide in card… |
1.3.6.1.4.1.868.2.4.1.2.2.4.1.21 | cfetf100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |