This variable reflects the status of the DPT/OPP jumper
on the board. This jumper controls the behavior of the
converter when a loss of signal is detected. When the
jumper is in the default OPP position, the loss of signal
detect on one port causes the opposite port to be shut
down. In this case, Port Shutoff is said to be disabled(2).
In the DPT (enabled(1)) position, both ports are shut down.
Use of the DPT position is discouraged, as it is more likely
to lead to a signal loss condition from which the
converter is unable to recover.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cfmff100PortShutOff OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable reflects the status of the DPT/OPP jumper on the board. This jumper controls the behavior of the converter when a loss of signal is detected. When the jumper is in the default OPP position, the loss of signal detect on one port causes the opposite port to be shut down. In this case, Port Shutoff is said to be disabled(2). In the DPT (enabled(1)) position, both ports are shut down. Use of the DPT position is discouraged, as it is more likely to lead to a signal loss condition from which the converter is unable to recover." ::= { cfmff100Entry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.1 | cfmff100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.2 | cfmff100SlotIndex | 0 | 0 | The slot in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.3 | cfmff100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.4 | cfmff100MRevision | 0 | 0 | The marketing revision of the device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.5 | cfmff100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.6 | cfmff100ConnA | 0 | 0 | The style of SingleMode connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.7 | cfmff100ConnB | 0 | 0 | The style of MultiMode connector built into this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.8 | cfmff100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.9 | cfmff100SMSignal | 0 | 0 | Status of singlemode signal detect for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.10 | cfmff100MMSignal | 0 | 0 | Status of singlemode signal detect for this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.11 | cfmff100Enabled | 0 | 0 | Ports on this device can be disabled individually. When this control is set to yes(1), the entire device is enabled. When it is s… |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.13 | cfmff100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.5.1.14 | cfmff100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |