Value is yes(1) when this supply is currently selected
to supply power to the cabinet.
Parsed from file MCC16-MIB.mib
Module: MCC16-MIB
Vendor: Transition Engineering Inc.
Module: MCC16-MIB
[Automatically extracted from oidview.com]
cpsmp100InUse OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Value is yes(1) when this supply is currently selected to supply power to the cabinet." ::= { cpsmp100Entry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.1 | cpsmp100BiaIndex | 0 | 0 | The serial number (BIA) of the cabinet in which the device is installed |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.2 | cpsmp100SlotIndex | 0 | 0 | The slot in which the device is installed. Power Supplies occupy special slots numbered 125 and higher. |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.3 | cpsmp100Groups | 0 | 0 | User-defined keywords that group this device together with other devices under a user-defined scheme. By placing matching keyword… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.4 | cpsmp100MRevision | 0 | 0 | The marketing revision of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.5 | cpsmp100CfgMatch | 0 | 0 | yes(1) indicates that the conditions specified in cpsGroupCtrl.0 match the Groups value for this device. no(2) means that there i… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.6 | cpsmp100SerialNumber | 0 | 0 | The serial number of this device |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.7 | cpsmp100Mode | 0 | 0 | When one power supply is set to master(1) and the other is set to slave(2), the master will supply all power to the cabinet, and … |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.8 | cpsmp100ConfigMode | 0 | 0 | This device has a jumper or switch that disables software management of the device. When ConfigMode is hardware(2), SNMP manageme… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.9 | cpsmp100RemoteFan | 0 | 0 | A Remote Fan is a device that fits in a power supply slot but contains no power supply, only a fan. These devices are not managea… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.10 | cpsmp100PowerOK | 0 | 0 | This variable has the value yes(1) any time this supply is capable of supplying at least 11.6 volts to the cabinet. Note that a v… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.12 | cpsmp100ChassisPower | 0 | 0 | Power currently supplied to the cabinet, in milliwatts |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.13 | cpsmp100ChassisTemp | 0 | 0 | The temperature inside the cabinet as detected by the power supply, in tenths of degrees centigrade |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.14 | cpsmp100RFanFault | 0 | 0 | Normally no(2), this value changes to yes(1) when an installed Remote fan is drawing excessive current or none at all. |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.15 | cpsmp100LFanFault | 0 | 0 | Normally no(2), this value changes to yes(1) when the Local fan is drawing excessive current or none at all. |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.16 | cpsmp100SupplyType | 0 | 0 | The supply voltage that this unit is designed to accept. If AC(1), the supply accepts 90-260VAC, 47 to 400Hz. If DC48(2), the sup… |
| 1.3.6.1.4.1.868.2.4.1.2.2.6.1.17 | cpsmp100CacheClean | 0 | 0 | When the value is clean(1)Device and Management Module cache are synchronized, no automatic corrections to configuration will occ… |