This object uniquely identifies the H.248 profile.
Parsed from file CISCO-MEGACO-EXT-MIB.mib
Module: CISCO-MEGACO-EXT-MIB
This object uniquely identifies the H.248 profile.
This object uniquely identifies the H.248 profile.
Parsed from file CISCO-MEGACO-EXT-MIB.my.txt
Company: None
Module: CISCO-MEGACO-EXT-MIB
This object uniquely identifies the H.248 profile.
cmedxProfileIndex OBJECT-TYPE SYNTAX CCallControlProfileIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the H.248 profile." ::= { cmedxProfileEntry 1 }
cmedxProfileIndex OBJECT-TYPE SYNTAX CCallControlProfileIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "This object uniquely identifies the H.248 profile." ::= { cmedxProfileEntry 1 }
Vendor: Cisco
Module: CISCO-MEGACO-EXT-MIB
[Automatically extracted from oidview.com]
cmedxProfileIndex OBJECT-TYPE SYNTAX CCallControlProfileIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the H.248 profile." ::= { cmedxProfileEntry 1 }
cmedxProfileIndex OBJECT-TYPE SYNTAX CCallControlProfileIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the H.248 profile." ::= { cmedxProfileEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.104.1.1.3.1.2 | cmedxProfilePlayCpToneInterDur | 0 | 0 | This object specifies the duration for playing a list of call progressing tones between two call progressing signals. The value of… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.3 | cmedxProfileDtmfDigitOnDur | 0 | 0 | This object specifies the duration of the active DTMF digit during DTMF playout from the gateway. A complete DTMF digit is charac… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.4 | cmedxProfileDtmfPauseDur | 0 | 0 | This object specifies the duration of the pause after an active DTMF digit during DTMF playout from the gateway. For playout of m… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.5 | cmedxProfileCot1Frequency | 0 | 0 | This object specifies the tone frequency to be transmit between gateways in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.6 | cmedxProfileCot2Frequency | 0 | 0 | This object specifies the tone frequency to be received between gateways in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.7 | cmedxProfileInitiateCotDur | 0 | 0 | This object specifies the duration for the continuity test tone to be played when the gateway initiates a COT. The value of 0 ind… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.8 | cmedxProfileRespCotMethod | 0 | 0 | This object specifies the method for responding to COT (Continuity Test Tone) when the gateway detects a the continuity test sign… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.9 | cmedxProfileDetectLongCpToneDur | 0 | 0 | This object specifies the duration for detecting a long call progressing tone. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.10 | cmedxProfileDetectLongDigitDur | 0 | 0 | This object specifies the duration for detecting a long digit tone signal. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.11 | cmedxProfileEchoCancelEnabled | 0 | 0 | This object specifies whether or not the Echo Cancellation is enabled or not. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.12 | cmedxProfileEchoCancelTail | 0 | 0 | This object specifies the Echo Canceler coverage. This object is valid if the cmedxProfileEchoCancelEnabled object is 'true'. echo… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.13 | cmedxProfileInGainControl | 0 | 0 | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gai… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.14 | cmedxProfileOutAttnControl | 0 | 0 | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings on… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.15 | cmedxProfileVoIpVadEnabled | 0 | 0 | This object specifies VAD (Voice Activity Detection) is enabled for the compression DSPs of this interface when the application i… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.16 | cmedxProfileVoIpVadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoIP application. Once the voice inactivity is detected, the media gateway… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.17 | cmedxProfileVoAal2VadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoATM over AAL2 application. Once the voice inactivity is detected, the me… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.18 | cmedxProfileAtmBearerType | 0 | 0 | This object specifies ATM bearer type. bearerSvc (1) - the ATM bearer type is SVC (Switched Virtual Circuit). bearerPvc (1) - the … |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.19 | cmedxProfileAtmAalPartialFill | 0 | 0 | This object specifies the fill level of cells in case of AAL adaptation . The value of this object will be used if the MGC does no… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.20 | cmedxProfileAtmAalType | 0 | 0 | This object specifies the adaptation layer of ATM. other (1) - None of the types listed below. aal1 (2) - ATM AAL1 adaptatio… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.21 | cmedxProfileSuppressBearerDigit | 0 | 0 | This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.22 | cmedxProfileRowStatus | 0 | 0 | When an entry is created, at least one of the objects in the entry has to be provided and the default value will be assigned to t… |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.23 | cmedxProfileOriginatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from originating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.24 | cmedxProfileOriginatingCotRx | 0 | 0 | This object specifies the COT tone to be received in originating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.25 | cmedxProfileTerminatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from terminating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.26 | cmedxProfileTerminatingCotRx | 0 | 0 | This object specifies the COT tone to be received in terminating gateway in the continuity test. |
| 1.3.6.1.4.1.9.10.104.1.1.3.1.27 | cmedxProfileComfortNoiseGenerate | 0 | 0 | This object specifies the type of comfort noise generation: (1) none: No comfort noise generation applied (2) simple: Cisco Propr… |