This object controls if the digits should be suppressed
from voice media stream. When MGC has requested digits,
if this object is set to 'true', the digits will be
reported to MGC only, the digits will not be sent as
regular voice or peer-to-peer packets in the bearer.
When MGC has requested digits, if this object is set to
'false', the digits will be reported to MGC as well as
be sent in the bearer according to the value of
cvapCodecConfigDtmfRelay in cvapCodecConfigTable.
When MGC has not requested digits, this object will be
ignored. The digits will be sent in the bearer according
to the value of cvapCodecConfigDtmfRelay in
cvapCodecConfigTable.
Parsed from file CISCO-MEGACO-EXT-MIB.mib
Module: CISCO-MEGACO-EXT-MIB
This object controls if the digits should be suppressed
from voice media stream. When MGC has requested digits,
if this object is set to 'true', the digits will be
reported to MGC only, the digits will not be sent as
regular voice or peer-to-peer packets in the bearer.
When MGC has requested digits, if this object is set to
'false', the digits will be reported to MGC as well as
be sent in the bearer according to the value of
cvapCodecConfigDtmfRelay in cvapCodecConfigTable.
When MGC has not requested digits, this object will be
ignored. The digits will be sent in the bearer according
to the value of cvapCodecConfigDtmfRelay in
cvapCodecConfigTable.
This object controls if the digits should be suppressed
from voice media stream. When MGC has requested digits,
if this object is set to 'true', the digits will be
reported to MGC only, the digits will not be sent as
regular voice or peer-to-peer packets in the bearer.
When MGC has requested digits, if this object is set to
'false', the digits will be reported to MGC as well as
be sent in the bearer according to the value of
cvapCodecConfigDtmfRelay in cvapCodecConfigTable.
When MGC has not requested digits, this object will be
ignored. The digits will be sent in the bearer according
to the value of cvapCodecConfigDtmfRelay in
cvapCodecConfigTable.
Parsed from file CISCO-MEGACO-EXT-MIB.my.txt
Company: None
Module: CISCO-MEGACO-EXT-MIB
This object controls if the digits should be suppressed
from voice media stream. When MGC has requested digits,
if this object is set to 'true', the digits will be
reported to MGC only, the digits will not be sent as
regular voice or peer-to-peer packets in the bearer.
When MGC has requested digits, if this object is set to
'false', the digits will be reported to MGC as well as
be sent in the bearer according to the value of
cvapCodecConfigDtmfRelay in cvapCodecConfigTable.
When MGC has not requested digits, this object will be
ignored. The digits will be sent in the bearer according
to the value of cvapCodecConfigDtmfRelay in
cvapCodecConfigTable.
cmedxProfileSuppressBearerDigit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is set to 'true', the digits will be reported to MGC only, the digits will not be sent as regular voice or peer-to-peer packets in the bearer. When MGC has requested digits, if this object is set to 'false', the digits will be reported to MGC as well as be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable. When MGC has not requested digits, this object will be ignored. The digits will be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable." DEFVAL { false } ::= { cmedxProfileEntry 21 }
cmedxProfileSuppressBearerDigit OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is set to 'true', the digits will be reported to MGC only, the digits will not be sent as regular voice or peer-to-peer packets in the bearer. When MGC has requested digits, if this object is set to 'false', the digits will be reported to MGC as well as be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable. When MGC has not requested digits, this object will be ignored. The digits will be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable." DEFVAL { false } ::= { cmedxProfileEntry 21 }
Vendor: Cisco
Module: CISCO-MEGACO-EXT-MIB
[Automatically extracted from oidview.com]
cmedxProfileSuppressBearerDigit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is set to 'true', the digits will be reported to MGC only, the digits will not be sent as regular voice or peer-to-peer packets in the bearer. When MGC has requested digits, if this object is set to 'false', the digits will be reported to MGC as well as be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable. When MGC has not requested digits, this object will be ignored. The digits will be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable." DEFVAL { false } ::= { cmedxProfileEntry 21 }
cmedxProfileSuppressBearerDigit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is set to 'true', the digits will be reported to MGC only, the digits will not be sent as regular voice or peer-to-peer packets in the bearer. When MGC has requested digits, if this object is set to 'false', the digits will be reported to MGC as well as be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable. When MGC has not requested digits, this object will be ignored. The digits will be sent in the bearer according to the value of cvapCodecConfigDtmfRelay in cvapCodecConfigTable." DEFVAL { false } ::= { cmedxProfileEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.104.1.1.3.1.1 | cmedxProfileIndex | 0 | 0 | This object uniquely identifies the H.248 profile. |
1.3.6.1.4.1.9.10.104.1.1.3.1.2 | cmedxProfilePlayCpToneInterDur | 0 | 0 | This object specifies the duration for playing a list of call progressing tones between two call progressing signals. The value of… |
1.3.6.1.4.1.9.10.104.1.1.3.1.3 | cmedxProfileDtmfDigitOnDur | 0 | 0 | This object specifies the duration of the active DTMF digit during DTMF playout from the gateway. A complete DTMF digit is charac… |
1.3.6.1.4.1.9.10.104.1.1.3.1.4 | cmedxProfileDtmfPauseDur | 0 | 0 | This object specifies the duration of the pause after an active DTMF digit during DTMF playout from the gateway. For playout of m… |
1.3.6.1.4.1.9.10.104.1.1.3.1.5 | cmedxProfileCot1Frequency | 0 | 0 | This object specifies the tone frequency to be transmit between gateways in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.6 | cmedxProfileCot2Frequency | 0 | 0 | This object specifies the tone frequency to be received between gateways in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.7 | cmedxProfileInitiateCotDur | 0 | 0 | This object specifies the duration for the continuity test tone to be played when the gateway initiates a COT. The value of 0 ind… |
1.3.6.1.4.1.9.10.104.1.1.3.1.8 | cmedxProfileRespCotMethod | 0 | 0 | This object specifies the method for responding to COT (Continuity Test Tone) when the gateway detects a the continuity test sign… |
1.3.6.1.4.1.9.10.104.1.1.3.1.9 | cmedxProfileDetectLongCpToneDur | 0 | 0 | This object specifies the duration for detecting a long call progressing tone. |
1.3.6.1.4.1.9.10.104.1.1.3.1.10 | cmedxProfileDetectLongDigitDur | 0 | 0 | This object specifies the duration for detecting a long digit tone signal. |
1.3.6.1.4.1.9.10.104.1.1.3.1.11 | cmedxProfileEchoCancelEnabled | 0 | 0 | This object specifies whether or not the Echo Cancellation is enabled or not. |
1.3.6.1.4.1.9.10.104.1.1.3.1.12 | cmedxProfileEchoCancelTail | 0 | 0 | This object specifies the Echo Canceler coverage. This object is valid if the cmedxProfileEchoCancelEnabled object is 'true'. echo… |
1.3.6.1.4.1.9.10.104.1.1.3.1.13 | cmedxProfileInGainControl | 0 | 0 | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gai… |
1.3.6.1.4.1.9.10.104.1.1.3.1.14 | cmedxProfileOutAttnControl | 0 | 0 | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings on… |
1.3.6.1.4.1.9.10.104.1.1.3.1.15 | cmedxProfileVoIpVadEnabled | 0 | 0 | This object specifies VAD (Voice Activity Detection) is enabled for the compression DSPs of this interface when the application i… |
1.3.6.1.4.1.9.10.104.1.1.3.1.16 | cmedxProfileVoIpVadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoIP application. Once the voice inactivity is detected, the media gateway… |
1.3.6.1.4.1.9.10.104.1.1.3.1.17 | cmedxProfileVoAal2VadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoATM over AAL2 application. Once the voice inactivity is detected, the me… |
1.3.6.1.4.1.9.10.104.1.1.3.1.18 | cmedxProfileAtmBearerType | 0 | 0 | This object specifies ATM bearer type. bearerSvc (1) - the ATM bearer type is SVC (Switched Virtual Circuit). bearerPvc (1) - the … |
1.3.6.1.4.1.9.10.104.1.1.3.1.19 | cmedxProfileAtmAalPartialFill | 0 | 0 | This object specifies the fill level of cells in case of AAL adaptation . The value of this object will be used if the MGC does no… |
1.3.6.1.4.1.9.10.104.1.1.3.1.20 | cmedxProfileAtmAalType | 0 | 0 | This object specifies the adaptation layer of ATM. other (1) - None of the types listed below. aal1 (2) - ATM AAL1 adaptatio… |
1.3.6.1.4.1.9.10.104.1.1.3.1.22 | cmedxProfileRowStatus | 0 | 0 | When an entry is created, at least one of the objects in the entry has to be provided and the default value will be assigned to t… |
1.3.6.1.4.1.9.10.104.1.1.3.1.23 | cmedxProfileOriginatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from originating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.24 | cmedxProfileOriginatingCotRx | 0 | 0 | This object specifies the COT tone to be received in originating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.25 | cmedxProfileTerminatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from terminating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.26 | cmedxProfileTerminatingCotRx | 0 | 0 | This object specifies the COT tone to be received in terminating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.27 | cmedxProfileComfortNoiseGenerate | 0 | 0 | This object specifies the type of comfort noise generation: (1) none: No comfort noise generation applied (2) simple: Cisco Propr… |