This object specifies whether or not the Echo
Cancellation is enabled or not.
Parsed from file CISCO-MEGACO-EXT-MIB.mib
Module: CISCO-MEGACO-EXT-MIB
This object specifies whether or not the Echo
Cancellation is enabled or not.
This object specifies whether or not the Echo
Cancellation is enabled or not.
Parsed from file CISCO-MEGACO-EXT-MIB.my.txt
Company: None
Module: CISCO-MEGACO-EXT-MIB
This object specifies whether or not the Echo
Cancellation is enabled or not.
cmedxProfileEchoCancelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether or not the Echo Cancellation is enabled or not." REFERENCE "H.248 Gateway Control Protocol, Version 2 TDM Circuit Package (TDMC)." DEFVAL { true } ::= { cmedxProfileEntry 11 }
cmedxProfileEchoCancelEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether or not the Echo Cancellation is enabled or not." REFERENCE "H.248 Gateway Control Protocol, Version 2 TDM Circuit Package (TDMC)." DEFVAL { true } ::= { cmedxProfileEntry 11 }
Vendor: Cisco
Module: CISCO-MEGACO-EXT-MIB
[Automatically extracted from oidview.com]
cmedxProfileEchoCancelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether or not the Echo Cancellation is enabled or not." REFERENCE "H.248 Gateway Control Protocol, Version 2 TDM Circuit Package (TDMC)." DEFVAL { true } ::= { cmedxProfileEntry 11 }
cmedxProfileEchoCancelEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether or not the Echo Cancellation is enabled or not." REFERENCE "H.248 Gateway Control Protocol, Version 2 TDM Circuit Package (TDMC)." DEFVAL { true } ::= { cmedxProfileEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.104.1.1.3.1.1 | cmedxProfileIndex | 0 | 0 | This object uniquely identifies the H.248 profile. |
1.3.6.1.4.1.9.10.104.1.1.3.1.2 | cmedxProfilePlayCpToneInterDur | 0 | 0 | This object specifies the duration for playing a list of call progressing tones between two call progressing signals. The value of… |
1.3.6.1.4.1.9.10.104.1.1.3.1.3 | cmedxProfileDtmfDigitOnDur | 0 | 0 | This object specifies the duration of the active DTMF digit during DTMF playout from the gateway. A complete DTMF digit is charac… |
1.3.6.1.4.1.9.10.104.1.1.3.1.4 | cmedxProfileDtmfPauseDur | 0 | 0 | This object specifies the duration of the pause after an active DTMF digit during DTMF playout from the gateway. For playout of m… |
1.3.6.1.4.1.9.10.104.1.1.3.1.5 | cmedxProfileCot1Frequency | 0 | 0 | This object specifies the tone frequency to be transmit between gateways in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.6 | cmedxProfileCot2Frequency | 0 | 0 | This object specifies the tone frequency to be received between gateways in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.7 | cmedxProfileInitiateCotDur | 0 | 0 | This object specifies the duration for the continuity test tone to be played when the gateway initiates a COT. The value of 0 ind… |
1.3.6.1.4.1.9.10.104.1.1.3.1.8 | cmedxProfileRespCotMethod | 0 | 0 | This object specifies the method for responding to COT (Continuity Test Tone) when the gateway detects a the continuity test sign… |
1.3.6.1.4.1.9.10.104.1.1.3.1.9 | cmedxProfileDetectLongCpToneDur | 0 | 0 | This object specifies the duration for detecting a long call progressing tone. |
1.3.6.1.4.1.9.10.104.1.1.3.1.10 | cmedxProfileDetectLongDigitDur | 0 | 0 | This object specifies the duration for detecting a long digit tone signal. |
1.3.6.1.4.1.9.10.104.1.1.3.1.12 | cmedxProfileEchoCancelTail | 0 | 0 | This object specifies the Echo Canceler coverage. This object is valid if the cmedxProfileEchoCancelEnabled object is 'true'. echo… |
1.3.6.1.4.1.9.10.104.1.1.3.1.13 | cmedxProfileInGainControl | 0 | 0 | This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gai… |
1.3.6.1.4.1.9.10.104.1.1.3.1.14 | cmedxProfileOutAttnControl | 0 | 0 | This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings on… |
1.3.6.1.4.1.9.10.104.1.1.3.1.15 | cmedxProfileVoIpVadEnabled | 0 | 0 | This object specifies VAD (Voice Activity Detection) is enabled for the compression DSPs of this interface when the application i… |
1.3.6.1.4.1.9.10.104.1.1.3.1.16 | cmedxProfileVoIpVadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoIP application. Once the voice inactivity is detected, the media gateway… |
1.3.6.1.4.1.9.10.104.1.1.3.1.17 | cmedxProfileVoAal2VadTimer | 0 | 0 | This object specifies the hangover time for VAD in the VoATM over AAL2 application. Once the voice inactivity is detected, the me… |
1.3.6.1.4.1.9.10.104.1.1.3.1.18 | cmedxProfileAtmBearerType | 0 | 0 | This object specifies ATM bearer type. bearerSvc (1) - the ATM bearer type is SVC (Switched Virtual Circuit). bearerPvc (1) - the … |
1.3.6.1.4.1.9.10.104.1.1.3.1.19 | cmedxProfileAtmAalPartialFill | 0 | 0 | This object specifies the fill level of cells in case of AAL adaptation . The value of this object will be used if the MGC does no… |
1.3.6.1.4.1.9.10.104.1.1.3.1.20 | cmedxProfileAtmAalType | 0 | 0 | This object specifies the adaptation layer of ATM. other (1) - None of the types listed below. aal1 (2) - ATM AAL1 adaptatio… |
1.3.6.1.4.1.9.10.104.1.1.3.1.21 | cmedxProfileSuppressBearerDigit | 0 | 0 | This object controls if the digits should be suppressed from voice media stream. When MGC has requested digits, if this object is… |
1.3.6.1.4.1.9.10.104.1.1.3.1.22 | cmedxProfileRowStatus | 0 | 0 | When an entry is created, at least one of the objects in the entry has to be provided and the default value will be assigned to t… |
1.3.6.1.4.1.9.10.104.1.1.3.1.23 | cmedxProfileOriginatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from originating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.24 | cmedxProfileOriginatingCotRx | 0 | 0 | This object specifies the COT tone to be received in originating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.25 | cmedxProfileTerminatingCotTx | 0 | 0 | This object specifies the COT tone to be transmitted from terminating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.26 | cmedxProfileTerminatingCotRx | 0 | 0 | This object specifies the COT tone to be received in terminating gateway in the continuity test. |
1.3.6.1.4.1.9.10.104.1.1.3.1.27 | cmedxProfileComfortNoiseGenerate | 0 | 0 | This object specifies the type of comfort noise generation: (1) none: No comfort noise generation applied (2) simple: Cisco Propr… |