The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate. It complements
the definition of cpwVcType used in CISCO-IETF-PW-MIB.
For structure-agnostic the following should be used:
a) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit.
Parsed from file CISCO-IETF-PW-TDM-MIB.mib
Module: CISCO-IETF-PW-TDM-MIB
The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate. It complements
the definition of cpwVcType used in CISCO-IETF-PW-MIB.
For structure-agnostic the following should be used:
a) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit.
The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate. It complements
the definition of cpwVcType used in CISCO-IETF-PW-MIB.
For structure-agnostic the following should be used:
a) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit.
Parsed from file CISCO-IETF-PW-TDM-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-TDM-MIB
The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate. It complements
the definition of cpwVcType used in CISCO-IETF-PW-MIB.
For structure-agnostic the following should be used:
a) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit.
cpwCTDMRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of cpwVcType used in CISCO-IETF-PW-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit." REFERENCE "Control Protocol Extensions for Setup of TDM Pseudowires [TDMCP-EXT], describes extension to the PWE3 control protocol and PWE3 IANA allocations required for setup of TDM pseudo wires." DEFVAL { 32 } ::= { cpwCTDMEntry 1 }
cpwCTDMRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of cpwVcType used in CISCO-IETF-PW-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit." REFERENCE "Control Protocol Extensions for Setup of TDM Pseudowires [TDMCP-EXT], describes extension to the PWE3 control protocol and PWE3 IANA allocations required for setup of TDM pseudo wires." DEFVAL { 32 } ::= { cpwCTDMEntry 1 }
Vendor: Cisco
Module: CISCO-IETF-PW-TDM-MIB
[Automatically extracted from oidview.com]
cpwCTDMRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of cpwVcType used in CISCO-IETF-PW-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit." REFERENCE "Control Protocol Extensions for Setup of TDM Pseudowires [TDMCP-EXT], describes extension to the PWE3 control protocol and PWE3 IANA allocations required for setup of TDM pseudo wires." DEFVAL { 32 } ::= { cpwCTDMEntry 1 }
cpwCTDMRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definition of cpwVcType used in CISCO-IETF-PW-MIB. For structure-agnostic the following should be used: a) Satop E1 - 32 b) Satop T1 emulation: i) MUST be set to 24 in the basic emulation mode ii) MUST be set to 25 for the 'Octet-aligned T1' emulation mode c) Satop E3 - 535 d) Satop T3 - 699 For all kinds of structure-aware emulation, this parameter MUST be set to N where N is the number of DS0 channels in the corresponding attachment circuit." REFERENCE "Control Protocol Extensions for Setup of TDM Pseudowires [TDMCP-EXT], describes extension to the PWE3 control protocol and PWE3 IANA allocations required for setup of TDM pseudo wires." DEFVAL { 32 } ::= { cpwCTDMEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.131.1.1.1.2 | cpwCTDMIfIndex | 0 | 0 | This is a unique index within the ifTable. It represents the interface index of the full link or the interface index for the bund… |
| 1.3.6.1.4.1.9.10.131.1.1.1.3 | cpwCGenTDMCfgIndex | 0 | 0 | Index to the generic parameters in the TDM configuration table that appears in this MIB module. It is likely that multiple TDM PW… |
| 1.3.6.1.4.1.9.10.131.1.1.1.4 | cpwCRelTDMCfgIndex | 0 | 0 | Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as TDMoIP or CESoPSN. It … |
| 1.3.6.1.4.1.9.10.131.1.1.1.5 | cpwCTDMConfigError | 0 | 0 | Any of the bits are set if the local configuration is not compatible with the peer configuration as available from the various pa… |
| 1.3.6.1.4.1.9.10.131.1.1.1.6 | cpwCTDMTimeElapsed | 0 | 0 | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, fo… |
| 1.3.6.1.4.1.9.10.131.1.1.1.7 | cpwCTDMValidIntervals | 0 | 0 | The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporti… |
| 1.3.6.1.4.1.9.10.131.1.1.1.8 | cpwCTDMValidDayIntervals | 0 | 0 | The number of previous days for which data was collected. An agent with TDM capability must be capable of supporting at least n in… |
| 1.3.6.1.4.1.9.10.131.1.1.1.9 | cpwCTDMCurrentIndications | 0 | 0 | The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing lay… |
| 1.3.6.1.4.1.9.10.131.1.1.1.10 | cpwCTDMLatchedIndications | 0 | 0 | The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS… |
| 1.3.6.1.4.1.9.10.131.1.1.1.11 | cpwCTDMLastEsTimeStamp | 0 | 0 | The value of sysUpTime at the most recent occasion at which the TDM PW entered the ES or SES state. |