The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
cpwCTDMCurrentIndications above.
Note: the algorithm used to latch these indications when
entering a defect state is implementation specific.
Parsed from file CISCO-IETF-PW-TDM-MIB.mib
Module: CISCO-IETF-PW-TDM-MIB
The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
cpwCTDMCurrentIndications above.
Note: the algorithm used to latch these indications when
entering a defect state is implementation specific.
The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
cpwCTDMCurrentIndications above.
Note: the algorithm used to latch these indications when
entering a defect state is implementation specific.
Parsed from file CISCO-IETF-PW-TDM-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-TDM-MIB
The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOPS are
useful, all are latched here. For bit definitions, see
cpwCTDMCurrentIndications above.
Note: the algorithm used to latch these indications when
entering a defect state is implementation specific.
cpwCTDMLatchedIndications OBJECT-TYPE SYNTAX BITS { other(0), staryPacket(1), malformedPacket(2), excessivePktLossRate(3), bufferOverrun(4), bufferUnderrun(5), remotePktLoss(6), pktMisOrder(7), packetLoss(8), tdmFault(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see cpwCTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering a defect state is implementation specific." ::= { cpwCTDMEntry 10 }
cpwCTDMLatchedIndications OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see cpwCTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering a defect state is implementation specific." ::= { cpwCTDMEntry 10 }
Vendor: Cisco
Module: CISCO-IETF-PW-TDM-MIB
[Automatically extracted from oidview.com]
cpwCTDMLatchedIndications OBJECT-TYPE SYNTAX BITS { other(0), staryPacket(1), malformedPacket(2), excessivePktLossRate(3), bufferOverrun(4), bufferUnderrun(5), remotePktLoss(6), pktMisOrder(7), packetLoss(8), tdmFault(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see cpwCTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering a defect state is implementation specific." ::= { cpwCTDMEntry 10 }
cpwCTDMLatchedIndications OBJECT-TYPE SYNTAX BITS { other(0), staryPacket(1), malformedPacket(2), excessivePktLossRate(3), bufferOverrun(4), bufferUnderrun(5), remotePktLoss(6), pktMisOrder(7), packetLoss(8), tdmFault(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of TDM indicators when the TDM PW last declared an error second (either as ES, SES or a second with errors inside a UAS) condition. At this time, only LOPS can create a failure. Since indicators other than LOPS are useful, all are latched here. For bit definitions, see cpwCTDMCurrentIndications above. Note: the algorithm used to latch these indications when entering a defect state is implementation specific." ::= { cpwCTDMEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.10.131.1.1.1.1 | cpwCTDMRate | 0 | 0 | The parameter represents the bit-rate of the TDM service in multiples of the 'basic' 64 Kbit/s rate. It complements the definitio… |
1.3.6.1.4.1.9.10.131.1.1.1.2 | cpwCTDMIfIndex | 0 | 0 | This is a unique index within the ifTable. It represents the interface index of the full link or the interface index for the bund… |
1.3.6.1.4.1.9.10.131.1.1.1.3 | cpwCGenTDMCfgIndex | 0 | 0 | Index to the generic parameters in the TDM configuration table that appears in this MIB module. It is likely that multiple TDM PW… |
1.3.6.1.4.1.9.10.131.1.1.1.4 | cpwCRelTDMCfgIndex | 0 | 0 | Index to the relevant TDM configuration table entry that appears in one of the related MIB modules such as TDMoIP or CESoPSN. It … |
1.3.6.1.4.1.9.10.131.1.1.1.5 | cpwCTDMConfigError | 0 | 0 | Any of the bits are set if the local configuration is not compatible with the peer configuration as available from the various pa… |
1.3.6.1.4.1.9.10.131.1.1.1.6 | cpwCTDMTimeElapsed | 0 | 0 | The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, fo… |
1.3.6.1.4.1.9.10.131.1.1.1.7 | cpwCTDMValidIntervals | 0 | 0 | The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporti… |
1.3.6.1.4.1.9.10.131.1.1.1.8 | cpwCTDMValidDayIntervals | 0 | 0 | The number of previous days for which data was collected. An agent with TDM capability must be capable of supporting at least n in… |
1.3.6.1.4.1.9.10.131.1.1.1.9 | cpwCTDMCurrentIndications | 0 | 0 | The following defects should be detected and reported upon request: -Stray packets MAY be detected by the PSN and multiplexing lay… |
1.3.6.1.4.1.9.10.131.1.1.1.11 | cpwCTDMLastEsTimeStamp | 0 | 0 | The value of sysUpTime at the most recent occasion at which the TDM PW entered the ES or SES state. |