The amount of time the host should wait before declaring
the pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
administrative status to up and after finalization of
signaling (if supported) between the two PEs is smaller
than cpwCTDMCfgConsecPktsInSynch. Once the the PW has
OperStatus of 'up' this parameter is no longer valid. This
parameter is defined to ensure that the host does not
prematurely inform failure of the PW. In particular PW
'down' notifications should not be sent before expiration of
this timer. This parameter is valid only after adminisrative
changes of the status of the PW. If the PW fails due to
network impairments a 'down' notification should be sent.
Parsed from file CISCO-IETF-PW-TDM-MIB.mib
Module: CISCO-IETF-PW-TDM-MIB
The amount of time the host should wait before declaring
the pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
administrative status to up and after finalization of
signaling (if supported) between the two PEs is smaller
than cpwCTDMCfgConsecPktsInSynch. Once the the PW has
OperStatus of 'up' this parameter is no longer valid. This
parameter is defined to ensure that the host does not
prematurely inform failure of the PW. In particular PW
'down' notifications should not be sent before expiration of
this timer. This parameter is valid only after adminisrative
changes of the status of the PW. If the PW fails due to
network impairments a 'down' notification should be sent.
cpwCTDMCfgSetUp2SynchtimeOut
View at oid-info.com
The amount of time the host should wait before declaring
the pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
administrative status to up and after finalization of
signaling (if supported) between the two PEs is smaller
than cpwCTDMCfgConsecPktsInSynch. Once the the PW has
OperStatus of 'up' this parameter is no longer valid. This
parameter is defined to ensure that the host does not
prematurely inform failure of the PW. In particular PW
'down' notifications should not be sent before expiration of
this timer. This parameter is valid only after adminisrative
changes of the status of the PW. If the PW fails due to
network impairments a 'down' notification should be sent.
Parsed from file CISCO-IETF-PW-TDM-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-TDM-MIB
The amount of time the host should wait before declaring
the pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
administrative status to up and after finalization of
signaling (if supported) between the two PEs is smaller
than cpwCTDMCfgConsecPktsInSynch. Once the the PW has
OperStatus of 'up' this parameter is no longer valid. This
parameter is defined to ensure that the host does not
prematurely inform failure of the PW. In particular PW
'down' notifications should not be sent before expiration of
this timer. This parameter is valid only after adminisrative
changes of the status of the PW. If the PW fails due to
network impairments a 'down' notification should be sent.
cpwCTDMCfgSetUp2SynchTimeOut OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the administrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than cpwCTDMCfgConsecPktsInSynch. Once the the PW has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the PW. In particular PW 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the PW. If the PW fails due to network impairments a 'down' notification should be sent." DEFVAL { 5000 } ::= { cpwCTDMCfgEntry 10 }
cpwCTDMCfgSetUp2SynchTimeOut OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the administrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than cpwCTDMCfgConsecPktsInSynch. Once the the PW has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the PW. In particular PW 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the PW. If the PW fails due to network impairments a 'down' notification should be sent." DEFVAL { 5000 } ::= { cpwCTDMCfgEntry 10 }
Vendor: Cisco
Module: CISCO-IETF-PW-TDM-MIB
[Automatically extracted from oidview.com]
cpwCTDMCfgSetUp2SynchTimeOut OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the administrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than cpwCTDMCfgConsecPktsInSynch. Once the the PW has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the PW. In particular PW 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the PW. If the PW fails due to network impairments a 'down' notification should be sent." DEFVAL { 5000 } ::= { cpwCTDMCfgEntry 10 }
cpwCTDMCfgSetUp2SynchTimeOut OBJECT-TYPE SYNTAX Unsigned32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the administrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than cpwCTDMCfgConsecPktsInSynch. Once the the PW has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the PW. In particular PW 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the PW. If the PW fails due to network impairments a 'down' notification should be sent." DEFVAL { 5000 } ::= { cpwCTDMCfgEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.131.1.3.1.1 | cpwCTDMCfgIndex | 0 | 0 | Index to an entry in this table. The value is a copy of the assigned cpwCTDMCfgIndexNext. |
| 1.3.6.1.4.1.9.10.131.1.3.1.2 | cpwCTDMCfgConfErr | 0 | 0 | This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to se… |
| 1.3.6.1.4.1.9.10.131.1.3.1.3 | cpwCTDMCfgPayloadSize | 0 | 0 | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be… |
| 1.3.6.1.4.1.9.10.131.1.3.1.4 | cpwCTDMCfgPktReorder | 0 | 0 | If set to true, CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence numbe… |
| 1.3.6.1.4.1.9.10.131.1.3.1.5 | cpwCTDMCfgRtpHdrUsed | 0 | 0 | If the value of this object is set to false, then a RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.9.10.131.1.3.1.6 | cpwCTDMCfgJtrBfrDepth | 0 | 0 | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configu… |
| 1.3.6.1.4.1.9.10.131.1.3.1.7 | cpwCTDMCfgPayloadSuppression | 0 | 0 | This object indicates whether the Payload suppression is eanbled or disabled. Payload MAY be omitted in order to conserve bandwid… |
| 1.3.6.1.4.1.9.10.131.1.3.1.8 | cpwCTDMCfgConsecPktsInSynch | 0 | 0 | The number of consecutive packets with sequential sequence numbers that are required to exit the Loss of Packets (LOPS) state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.9 | cpwCTDMCfgConsecMissPktsOutSynch | 0 | 0 | The number of consecutive missing packets that are required to enter the LOPS state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.11 | cpwCTDMCfgPktReplacePolicy | 0 | 0 | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for … |
| 1.3.6.1.4.1.9.10.131.1.3.1.12 | cpwCTDMCfgAvePktLossTimeWindow | 0 | 0 | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate |
| 1.3.6.1.4.1.9.10.131.1.3.1.13 | cpwCTDMCfgExcessivePktLossThreshold | 0 | 0 | Excessive packet loss rate is detected by computing the average packetloss rate over a cpwCTDMCfgAvePktLossTimeWindow amount of t… |
| 1.3.6.1.4.1.9.10.131.1.3.1.14 | cpwCTDMCfgAlarmThreshold | 0 | 0 | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is mil… |
| 1.3.6.1.4.1.9.10.131.1.3.1.15 | cpwCTDMCfgClearAlarmThreshold | 0 | 0 | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's … |
| 1.3.6.1.4.1.9.10.131.1.3.1.16 | cpwCTDMCfgMissingPktsToSes | 0 | 0 | Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be cou… |
| 1.3.6.1.4.1.9.10.131.1.3.1.17 | cpwCTDMCfgTimestampMode | 0 | 0 | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the cloc… |
| 1.3.6.1.4.1.9.10.131.1.3.1.18 | cpwCTDMCfgStorageType | 0 | 0 | This variable indicates the storage type for this row. The following are the read-write objects in permanent(4) rows, that an age… |
| 1.3.6.1.4.1.9.10.131.1.3.1.19 | cpwCTDMCfgRowStatus | 0 | 0 | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or creat… |