The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific
packet delay variation.
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'cpwCTDMConfigError '.
Jitter buffers are a limited resource to be managed.
The actual size should be at least twice as big as the
value of cpwCTDMCfgJtrBfrDepth
Parsed from file CISCO-IETF-PW-TDM-MIB.mib
Module: CISCO-IETF-PW-TDM-MIB
The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific
packet delay variation.
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'cpwCTDMConfigError '.
Jitter buffers are a limited resource to be managed.
The actual size should be at least twice as big as the
value of cpwCTDMCfgJtrBfrDepth
The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific
packet delay variation.
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'cpwCTDMConfigError '.
Jitter buffers are a limited resource to be managed.
The actual size should be at least twice as big as the
value of cpwCTDMCfgJtrBfrDepth
Parsed from file CISCO-IETF-PW-TDM-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-TDM-MIB
The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific
packet delay variation.
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'cpwCTDMConfigError '.
Jitter buffers are a limited resource to be managed.
The actual size should be at least twice as big as the
value of cpwCTDMCfgJtrBfrDepth
cpwCTDMCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "microsecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'cpwCTDMConfigError '. Jitter buffers are a limited resource to be managed. The actual size should be at least twice as big as the value of cpwCTDMCfgJtrBfrDepth" DEFVAL { 3000 } ::= { cpwCTDMCfgEntry 6 }
cpwCTDMCfgJtrBfrDepth OBJECT-TYPE SYNTAX Gauge ACCESS read-write STATUS mandatory DESCRIPTION "The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'cpwCTDMConfigError '. Jitter buffers are a limited resource to be managed. The actual size should be at least twice as big as the value of cpwCTDMCfgJtrBfrDepth" DEFVAL { 3000 } ::= { cpwCTDMCfgEntry 6 }
Vendor: Cisco
Module: CISCO-IETF-PW-TDM-MIB
[Automatically extracted from oidview.com]
cpwCTDMCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "microsecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'cpwCTDMConfigError '. Jitter buffers are a limited resource to be managed. The actual size should be at least twice as big as the value of cpwCTDMCfgJtrBfrDepth" DEFVAL { 3000 } ::= { cpwCTDMCfgEntry 6 }
cpwCTDMCfgJtrBfrDepth OBJECT-TYPE SYNTAX Unsigned32 UNITS "microsecond" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by the implementation, the agent MUST return an error code 'jtrBfrDepth' in 'cpwCTDMConfigError '. Jitter buffers are a limited resource to be managed. The actual size should be at least twice as big as the value of cpwCTDMCfgJtrBfrDepth" DEFVAL { 3000 } ::= { cpwCTDMCfgEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.131.1.3.1.1 | cpwCTDMCfgIndex | 0 | 0 | Index to an entry in this table. The value is a copy of the assigned cpwCTDMCfgIndexNext. |
| 1.3.6.1.4.1.9.10.131.1.3.1.2 | cpwCTDMCfgConfErr | 0 | 0 | This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to se… |
| 1.3.6.1.4.1.9.10.131.1.3.1.3 | cpwCTDMCfgPayloadSize | 0 | 0 | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be… |
| 1.3.6.1.4.1.9.10.131.1.3.1.4 | cpwCTDMCfgPktReorder | 0 | 0 | If set to true, CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence numbe… |
| 1.3.6.1.4.1.9.10.131.1.3.1.5 | cpwCTDMCfgRtpHdrUsed | 0 | 0 | If the value of this object is set to false, then a RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.9.10.131.1.3.1.7 | cpwCTDMCfgPayloadSuppression | 0 | 0 | This object indicates whether the Payload suppression is eanbled or disabled. Payload MAY be omitted in order to conserve bandwid… |
| 1.3.6.1.4.1.9.10.131.1.3.1.8 | cpwCTDMCfgConsecPktsInSynch | 0 | 0 | The number of consecutive packets with sequential sequence numbers that are required to exit the Loss of Packets (LOPS) state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.9 | cpwCTDMCfgConsecMissPktsOutSynch | 0 | 0 | The number of consecutive missing packets that are required to enter the LOPS state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.10 | cpwCTDMCfgSetUp2SynchTimeOut | 0 | 0 | cpwCTDMCfgSetUp2SynchtimeOut |
| 1.3.6.1.4.1.9.10.131.1.3.1.11 | cpwCTDMCfgPktReplacePolicy | 0 | 0 | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for … |
| 1.3.6.1.4.1.9.10.131.1.3.1.12 | cpwCTDMCfgAvePktLossTimeWindow | 0 | 0 | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate |
| 1.3.6.1.4.1.9.10.131.1.3.1.13 | cpwCTDMCfgExcessivePktLossThreshold | 0 | 0 | Excessive packet loss rate is detected by computing the average packetloss rate over a cpwCTDMCfgAvePktLossTimeWindow amount of t… |
| 1.3.6.1.4.1.9.10.131.1.3.1.14 | cpwCTDMCfgAlarmThreshold | 0 | 0 | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is mil… |
| 1.3.6.1.4.1.9.10.131.1.3.1.15 | cpwCTDMCfgClearAlarmThreshold | 0 | 0 | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's … |
| 1.3.6.1.4.1.9.10.131.1.3.1.16 | cpwCTDMCfgMissingPktsToSes | 0 | 0 | Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be cou… |
| 1.3.6.1.4.1.9.10.131.1.3.1.17 | cpwCTDMCfgTimestampMode | 0 | 0 | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the cloc… |
| 1.3.6.1.4.1.9.10.131.1.3.1.18 | cpwCTDMCfgStorageType | 0 | 0 | This variable indicates the storage type for this row. The following are the read-write objects in permanent(4) rows, that an age… |
| 1.3.6.1.4.1.9.10.131.1.3.1.19 | cpwCTDMCfgRowStatus | 0 | 0 | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or creat… |