This object indicates the various configuration errors,
illegal settings within the cpwCTDMCfg table. The errors
can be due to several reasons, like Payload size mismatch
or Jitter Buffer depth value mistmatch.
payloadSize - This bit is set if there is Payload size
mismatch between the local and peer
configurations.
jtrBfrDepth - This bit is set if there is Jitter Buffer
depth value mistmatch.
other - This bit is set if the error is not due to
payloadSize and jtrBfrDepth mismatch.
Parsed from file CISCO-IETF-PW-TDM-MIB.mib
Module: CISCO-IETF-PW-TDM-MIB
This object indicates the various configuration errors,
illegal settings within the cpwCTDMCfg table. The errors
can be due to several reasons, like Payload size mismatch
or Jitter Buffer depth value mistmatch.
payloadSize - This bit is set if there is Payload size
mismatch between the local and peer
configurations.
jtrBfrDepth - This bit is set if there is Jitter Buffer
depth value mistmatch.
other - This bit is set if the error is not due to
payloadSize and jtrBfrDepth mismatch.
This object indicates the various configuration errors,
illegal settings within the cpwCTDMCfg table. The errors
can be due to several reasons, like Payload size mismatch
or Jitter Buffer depth value mistmatch.
payloadSize - This bit is set if there is Payload size
mismatch between the local and peer
configurations.
jtrBfrDepth - This bit is set if there is Jitter Buffer
depth value mistmatch.
other - This bit is set if the error is not due to
payloadSize and jtrBfrDepth mismatch.
Parsed from file CISCO-IETF-PW-TDM-MIB.my.txt
Company: None
Module: CISCO-IETF-PW-TDM-MIB
This object indicates the various configuration errors,
illegal settings within the cpwCTDMCfg table. The errors
can be due to several reasons, like Payload size mismatch
or Jitter Buffer depth value mistmatch.
payloadSize - This bit is set if there is Payload size
mismatch between the local and peer
configurations.
jtrBfrDepth - This bit is set if there is Jitter Buffer
depth value mistmatch.
other - This bit is set if the error is not due to
payloadSize and jtrBfrDepth mismatch.
cpwCTDMCfgConfErr OBJECT-TYPE SYNTAX BITS { other(0), payloadSize(1), jtrBfrDepth(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload size mismatch or Jitter Buffer depth value mistmatch. payloadSize - This bit is set if there is Payload size mismatch between the local and peer configurations. jtrBfrDepth - This bit is set if there is Jitter Buffer depth value mistmatch. other - This bit is set if the error is not due to payloadSize and jtrBfrDepth mismatch." ::= { cpwCTDMCfgEntry 2 }
cpwCTDMCfgConfErr OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload size mismatch or Jitter Buffer depth value mistmatch. payloadSize - This bit is set if there is Payload size mismatch between the local and peer configurations. jtrBfrDepth - This bit is set if there is Jitter Buffer depth value mistmatch. other - This bit is set if the error is not due to payloadSize and jtrBfrDepth mismatch." ::= { cpwCTDMCfgEntry 2 }
Vendor: Cisco
Module: CISCO-IETF-PW-TDM-MIB
[Automatically extracted from oidview.com]
cpwCTDMCfgConfErr OBJECT-TYPE SYNTAX BITS { other(0), payloadSize(1), jtrBfrDepth(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload size mismatch or Jitter Buffer depth value mistmatch. payloadSize - This bit is set if there is Payload size mismatch between the local and peer configurations. jtrBfrDepth - This bit is set if there is Jitter Buffer depth value mistmatch. other - This bit is set if the error is not due to payloadSize and jtrBfrDepth mismatch." ::= { cpwCTDMCfgEntry 2 }
cpwCTDMCfgConfErr OBJECT-TYPE SYNTAX BITS { other(0), payloadSize(1), jtrBfrDepth(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload size mismatch or Jitter Buffer depth value mistmatch. payloadSize - This bit is set if there is Payload size mismatch between the local and peer configurations. jtrBfrDepth - This bit is set if there is Jitter Buffer depth value mistmatch. other - This bit is set if the error is not due to payloadSize and jtrBfrDepth mismatch." ::= { cpwCTDMCfgEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.131.1.3.1.1 | cpwCTDMCfgIndex | 0 | 0 | Index to an entry in this table. The value is a copy of the assigned cpwCTDMCfgIndexNext. |
| 1.3.6.1.4.1.9.10.131.1.3.1.3 | cpwCTDMCfgPayloadSize | 0 | 0 | The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be… |
| 1.3.6.1.4.1.9.10.131.1.3.1.4 | cpwCTDMCfgPktReorder | 0 | 0 | If set to true, CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence numbe… |
| 1.3.6.1.4.1.9.10.131.1.3.1.5 | cpwCTDMCfgRtpHdrUsed | 0 | 0 | If the value of this object is set to false, then a RTP header is not pre-pended to the TDM packet. |
| 1.3.6.1.4.1.9.10.131.1.3.1.6 | cpwCTDMCfgJtrBfrDepth | 0 | 0 | The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configu… |
| 1.3.6.1.4.1.9.10.131.1.3.1.7 | cpwCTDMCfgPayloadSuppression | 0 | 0 | This object indicates whether the Payload suppression is eanbled or disabled. Payload MAY be omitted in order to conserve bandwid… |
| 1.3.6.1.4.1.9.10.131.1.3.1.8 | cpwCTDMCfgConsecPktsInSynch | 0 | 0 | The number of consecutive packets with sequential sequence numbers that are required to exit the Loss of Packets (LOPS) state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.9 | cpwCTDMCfgConsecMissPktsOutSynch | 0 | 0 | The number of consecutive missing packets that are required to enter the LOPS state. |
| 1.3.6.1.4.1.9.10.131.1.3.1.10 | cpwCTDMCfgSetUp2SynchTimeOut | 0 | 0 | cpwCTDMCfgSetUp2SynchtimeOut |
| 1.3.6.1.4.1.9.10.131.1.3.1.11 | cpwCTDMCfgPktReplacePolicy | 0 | 0 | This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for … |
| 1.3.6.1.4.1.9.10.131.1.3.1.12 | cpwCTDMCfgAvePktLossTimeWindow | 0 | 0 | The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate |
| 1.3.6.1.4.1.9.10.131.1.3.1.13 | cpwCTDMCfgExcessivePktLossThreshold | 0 | 0 | Excessive packet loss rate is detected by computing the average packetloss rate over a cpwCTDMCfgAvePktLossTimeWindow amount of t… |
| 1.3.6.1.4.1.9.10.131.1.3.1.14 | cpwCTDMCfgAlarmThreshold | 0 | 0 | Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is mil… |
| 1.3.6.1.4.1.9.10.131.1.3.1.15 | cpwCTDMCfgClearAlarmThreshold | 0 | 0 | Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's … |
| 1.3.6.1.4.1.9.10.131.1.3.1.16 | cpwCTDMCfgMissingPktsToSes | 0 | 0 | Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be cou… |
| 1.3.6.1.4.1.9.10.131.1.3.1.17 | cpwCTDMCfgTimestampMode | 0 | 0 | Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the cloc… |
| 1.3.6.1.4.1.9.10.131.1.3.1.18 | cpwCTDMCfgStorageType | 0 | 0 | This variable indicates the storage type for this row. The following are the read-write objects in permanent(4) rows, that an age… |
| 1.3.6.1.4.1.9.10.131.1.3.1.19 | cpwCTDMCfgRowStatus | 0 | 0 | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or creat… |