This managed object specifies the nominal power output of the
ATU-C across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection.
Parsed from file CISCO-ADSL-CAP-LINE-MIB.mib
Module: CISCO-ADSL-CAP-LINE-MIB
This managed object specifies the nominal power output of the
ATU-C across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection.
This managed object specifies the nominal power output of the
ATU-C across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection.
Parsed from file CISCO-ADSL-CAP-LINE-MIB.my.txt
Company: None
Module: CISCO-ADSL-CAP-LINE-MIB
This managed object specifies the nominal power output of the
ATU-C across the entire transmit spectrum. Observe that this
implies the attenuation of the signal for some data rates.
This value does not take effect until the modem has retrained
against the ATU-C to which the ATU-R has a connection.
cAdslAtucCapConfPsdmLevel OBJECT-TYPE SYNTAX Integer32 ( -52 | -49 | -46 | -43 | -40 | -37 ) UNITS "dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "This managed object specifies the nominal power output of the ATU-C across the entire transmit spectrum. Observe that this implies the attenuation of the signal for some data rates. This value does not take effect until the modem has retrained against the ATU-C to which the ATU-R has a connection." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { -40 } ::= { cAdslLineCapConfProfileEntry 10 }
cAdslAtucCapConfPsdmLevel OBJECT-TYPE SYNTAX INTEGER(-52|-49|-46|-43|-40|-37) ACCESS read-write STATUS mandatory DESCRIPTION "This managed object specifies the nominal power output of the ATU-C across the entire transmit spectrum. Observe that this implies the attenuation of the signal for some data rates. This value does not take effect until the modem has retrained against the ATU-C to which the ATU-R has a connection." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { -40 } ::= { cAdslLineCapConfProfileEntry 10 }
Vendor: Cisco
Module: CISCO-ADSL-CAP-LINE-MIB
[Automatically extracted from oidview.com]
cAdslAtucCapConfPsdmLevel OBJECT-TYPE SYNTAX Integer32 ( -52 | -49 | -46 | -43 | -40 | -37 ) UNITS "dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "This managed object specifies the nominal power output of the ATU-C across the entire transmit spectrum. Observe that this implies the attenuation of the signal for some data rates. This value does not take effect until the modem has retrained against the ATU-C to which the ATU-R has a connection." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { -40 } ::= { cAdslLineCapConfProfileEntry 10 }
cAdslAtucCapConfPsdmLevel OBJECT-TYPE SYNTAX Integer32 ( -52 | -49 | -46 | -43 | -40 | -37 ) UNITS "dBm/Hz" MAX-ACCESS read-create STATUS current DESCRIPTION "This managed object specifies the nominal power output of the ATU-C across the entire transmit spectrum. Observe that this implies the attenuation of the signal for some data rates. This value does not take effect until the modem has retrained against the ATU-C to which the ATU-R has a connection." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { -40 } ::= { cAdslLineCapConfProfileEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.149.1.14.1.1 | cAdslLineCapConfTrainingMode | 0 | 0 | cAdslLineCapConftrainingMode |
1.3.6.1.4.1.9.9.149.1.14.1.2 | cAdslLineCapConfInterleaveDelay | 0 | 0 | This object specifies the interleave delay for the downstream channel. The value of this object specifies the mapping (relative … |
1.3.6.1.4.1.9.9.149.1.14.1.3 | cAdslLineCapConfCpeSignature | 0 | 0 | This object specifies the value of the minimum CPE signature expected from ATU-R during training. The value of the CPE signature… |
1.3.6.1.4.1.9.9.149.1.14.1.4 | cAdslAtucCapConfTargetSnrMgn | 0 | 0 | cAdslAtucCapConftargetSnrMgn |
1.3.6.1.4.1.9.9.149.1.14.1.5 | cAdslAtucCapConfMinTxRate | 0 | 0 | This object specifies the minimum acceptable downstream line rate. |
1.3.6.1.4.1.9.9.149.1.14.1.6 | cAdslAtucCapConfMaxTxRate | 0 | 0 | This object specifies the desired line rate which the ATU-C will attempt to train at. |
1.3.6.1.4.1.9.9.149.1.14.1.7 | cAdslAtucCapConfDown136KBaudEnable | 0 | 0 | This object specifies whether the modem can train the downstream channel using a symbol rate of 136K symbols per second. |
1.3.6.1.4.1.9.9.149.1.14.1.8 | cAdslAtucCapConfUp68KBaudEnable | 0 | 0 | This object specifies whether the modem can train the upstream channel using a symbol rate of 68K symbols per second. The value o… |
1.3.6.1.4.1.9.9.149.1.14.1.9 | cAdslAtucCapConfUp17KBaudEnable | 0 | 0 | This object specifies whether the modem can train the upstream channel using a symbol rate of 17K symbols per second. The value o… |
1.3.6.1.4.1.9.9.149.1.14.1.11 | cAdslAturCapConfTargetSnrMgn | 0 | 0 | cAdslAturCapConftargetSnrMgn |
1.3.6.1.4.1.9.9.149.1.14.1.12 | cAdslAturCapConfMinTxRate | 0 | 0 | This object specifies the minimum acceptable upstream line rate. |
1.3.6.1.4.1.9.9.149.1.14.1.13 | cAdslAturCapConfMaxTxRate | 0 | 0 | This object specifies the desired line rate which the ATU-R will attempt to train at. |
1.3.6.1.4.1.9.9.149.1.14.1.14 | cAdslAturCapConfPsdmLevel | 0 | 0 | This managed object specifies the nominal power output of the ATU-R across the entire transmit spectrum. Observe that this impli… |