Reference record for OID 1.3.6.1.4.1.9.9.149.1.14.1.3



parent
1.3.6.1.4.1.9.9.149.1.14.1 (cAdslLineCapConfProfileEntry)
node code
3
node name
cAdslLineCapConfCpeSignature
dot oid
1.3.6.1.4.1.9.9.149.1.14.1.3
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoAdslLineCapMIB(149) ciscoAdslLineCapMIBObjects(1) cAdslLineCapConfProfileTable(14) cAdslLineCapConfProfileEntry(1) cAdslLineCapConfCpeSignature(3)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoAdslLineCapMIB/ciscoAdslLineCapMIBObjects/cAdslLineCapConfProfileTable/cAdslLineCapConfProfileEntry/cAdslLineCapConfCpeSignature
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/149/1/14/1/3

    Description by circitor

    This object specifies the value of the minimum CPE signature
    expected from ATU-R during training. The value of the CPE
    signature corresponds to the software version of the ATU-R.

    If the CPE signature advertised by an ATU-R is less than the
    value of this object, then the ATU-C will be placed into an
    idle state, thereby preventing the line from training.

    In addition, the agent increments the value of the
    cAdslAtucCapPerfInitFailures object for each attempt to train
    by an ATU-R advertising a CPE signature less than the value of
    this object. When a management client observes the value of
    cAdslAtucCapPerfInitFailures increasing, it should retrieve the
    value of the adslAturInvSerialNumber object (for more details,
    see the ADSL-LINE-MIB) . This value of this object reflects the
    CPE signature advertised by an ATU-R implementing the CAP line
    code. If the CPE signature of the ATU-R is not known, the value
    of the adslAturInvSerialNumber object should be a zero-length
    string.

    Parsed from file CISCO-ADSL-CAP-LINE-MIB.mib
    Module: CISCO-ADSL-CAP-LINE-MIB

    Description by cisco_v1

    This object specifies the value of the minimum CPE signature
    expected from ATU-R during training. The value of the CPE
    signature corresponds to the software version of the ATU-R.

    If the CPE signature advertised by an ATU-R is less than the
    value of this object, then the ATU-C will be placed into an
    idle state, thereby preventing the line from training.

    In addition, the agent increments the value of the
    cAdslAtucCapPerfInitFailures object for each attempt to train
    by an ATU-R advertising a CPE signature less than the value of
    this object. When a management client observes the value of
    cAdslAtucCapPerfInitFailures increasing, it should retrieve the
    value of the adslAturInvSerialNumber object (for more details,
    see the ADSL-LINE-MIB) . This value of this object reflects the
    CPE signature advertised by an ATU-R implementing the CAP line
    code. If the CPE signature of the ATU-R is not known, the value
    of the adslAturInvSerialNumber object should be a zero-length
    string.

    Description by mibdepot

    This object specifies the value of the minimum CPE signature
    expected from ATU-R during training. The value of the CPE
    signature corresponds to the software version of the ATU-R.

    If the CPE signature advertised by an ATU-R is less than the
    value of this object, then the ATU-C will be placed into an
    idle state, thereby preventing the line from training.

    In addition, the agent increments the value of the
    cAdslAtucCapPerfInitFailures object for each attempt to train
    by an ATU-R advertising a CPE signature less than the value of
    this object. When a management client observes the value of
    cAdslAtucCapPerfInitFailures increasing, it should retrieve the
    value of the adslAturInvSerialNumber object (for more details,
    see the ADSL-LINE-MIB) . This value of this object reflects the
    CPE signature advertised by an ATU-R implementing the CAP line
    code. If the CPE signature of the ATU-R is not known, the value
    of the adslAturInvSerialNumber object should be a zero-length
    string.

    Parsed from file CISCO-ADSL-CAP-LINE-MIB.my.txt
    Company: None
    Module: CISCO-ADSL-CAP-LINE-MIB

    Description by cisco

    This object specifies the value of the minimum CPE signature
    expected from ATU-R during training. The value of the CPE
    signature corresponds to the software version of the ATU-R.

    If the CPE signature advertised by an ATU-R is less than the
    value of this object, then the ATU-C will be placed into an
    idle state, thereby preventing the line from training.

    In addition, the agent increments the value of the
    cAdslAtucCapPerfInitFailures object for each attempt to train
    by an ATU-R advertising a CPE signature less than the value of
    this object. When a management client observes the value of
    cAdslAtucCapPerfInitFailures increasing, it should retrieve the
    value of the adslAturInvSerialNumber object (for more details,
    see the ADSL-LINE-MIB) . This value of this object reflects the
    CPE signature advertised by an ATU-R implementing the CAP line
    code. If the CPE signature of the ATU-R is not known, the value
    of the adslAturInvSerialNumber object should be a zero-length
    string.

    Information by circitor

    cAdslLineCapConfCpeSignature OBJECT-TYPE
    SYNTAX      INTEGER (0..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the value of the minimum CPE signature
        expected from ATU-R during training.  The value of the CPE
        signature corresponds to the software version of the ATU-R.
        
        If the CPE signature advertised by an ATU-R is less than the
        value of this object, then the ATU-C will be placed into an
        idle state, thereby preventing the line from training.
        
        In addition, the agent increments the value of the
        cAdslAtucCapPerfInitFailures object for each attempt to train
        by an ATU-R advertising a CPE signature less than the value of
        this object.  When a management client observes the value of
        cAdslAtucCapPerfInitFailures increasing, it should retrieve the
        value of the adslAturInvSerialNumber object (for more details,
        see the ADSL-LINE-MIB) .  This value of this object reflects the
        CPE signature advertised by an ATU-R implementing the CAP line
        code.  If the CPE signature of the ATU-R is not known, the value
        of the adslAturInvSerialNumber object should be a zero-length
        string."
    DEFVAL      { 0 }
    ::= { cAdslLineCapConfProfileEntry 3 }

    Information by cisco_v1

    cAdslLineCapConfCpeSignature OBJECT-TYPE
    SYNTAX INTEGER(0..127)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the value of the minimum CPE signature
        expected from ATU-R during training.  The value of the CPE
        signature corresponds to the software version of the ATU-R.
        
        If the CPE signature advertised by an ATU-R is less than the
        value of this object, then the ATU-C will be placed into an
        idle state, thereby preventing the line from training.
        
        In addition, the agent increments the value of the
        cAdslAtucCapPerfInitFailures object for each attempt to train
        by an ATU-R advertising a CPE signature less than the value of
        this object.  When a management client observes the value of
        cAdslAtucCapPerfInitFailures increasing, it should retrieve the
        value of the adslAturInvSerialNumber object (for more details,
        see the ADSL-LINE-MIB) .  This value of this object reflects the
        CPE signature advertised by an ATU-R implementing the CAP line
        code.  If the CPE signature of the ATU-R is not known, the value
        of the adslAturInvSerialNumber object should be a zero-length
        string."
    DEFVAL { 0 }
    ::= { cAdslLineCapConfProfileEntry 3 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-ADSL-CAP-LINE-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cAdslLineCapConfCpeSignature OBJECT-TYPE
    SYNTAX      INTEGER (0..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the value of the minimum CPE signature
        expected from ATU-R during training.  The value of the CPE
        signature corresponds to the software version of the ATU-R.
        
        If the CPE signature advertised by an ATU-R is less than the
        value of this object, then the ATU-C will be placed into an
        idle state, thereby preventing the line from training.
        
        In addition, the agent increments the value of the
        cAdslAtucCapPerfInitFailures object for each attempt to train
        by an ATU-R advertising a CPE signature less than the value of
        this object.  When a management client observes the value of
        cAdslAtucCapPerfInitFailures increasing, it should retrieve the
        value of the adslAturInvSerialNumber object (for more details,
        see the ADSL-LINE-MIB) .  This value of this object reflects the
        CPE signature advertised by an ATU-R implementing the CAP line
        code.  If the CPE signature of the ATU-R is not known, the value
        of the adslAturInvSerialNumber object should be a zero-length
        string."
    DEFVAL      { 0 }
    ::= { cAdslLineCapConfProfileEntry 3 }

    Information by cisco

    cAdslLineCapConfCpeSignature OBJECT-TYPE
    SYNTAX      INTEGER (0..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object specifies the value of the minimum CPE signature
        expected from ATU-R during training.  The value of the CPE
        signature corresponds to the software version of the ATU-R.
        
        If the CPE signature advertised by an ATU-R is less than the
        value of this object, then the ATU-C will be placed into an
        idle state, thereby preventing the line from training.
        
        In addition, the agent increments the value of the
        cAdslAtucCapPerfInitFailures object for each attempt to train
        by an ATU-R advertising a CPE signature less than the value of
        this object.  When a management client observes the value of
        cAdslAtucCapPerfInitFailures increasing, it should retrieve the
        value of the adslAturInvSerialNumber object (for more details,
        see the ADSL-LINE-MIB) .  This value of this object reflects the
        CPE signature advertised by an ATU-R implementing the CAP line
        code.  If the CPE signature of the ATU-R is not known, the value
        of the adslAturInvSerialNumber object should be a zero-length
        string."
    DEFVAL      { 0 }
    ::= { cAdslLineCapConfProfileEntry 3 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (13)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.149.1.14.1.1 cAdslLineCapConfTrainingMode 0 0 cAdslLineCapConftrainingMode
    1.3.6.1.4.1.9.9.149.1.14.1.2 cAdslLineCapConfInterleaveDelay 0 0 This object specifies the interleave delay for the
    downstream channel. The value of this object specifies the
    mapping (relative …
    1.3.6.1.4.1.9.9.149.1.14.1.4 cAdslAtucCapConfTargetSnrMgn 0 0 cAdslAtucCapConftargetSnrMgn
    1.3.6.1.4.1.9.9.149.1.14.1.5 cAdslAtucCapConfMinTxRate 0 0 This object specifies the minimum acceptable downstream
    line rate.
    1.3.6.1.4.1.9.9.149.1.14.1.6 cAdslAtucCapConfMaxTxRate 0 0 This object specifies the desired line rate which the ATU-C
    will attempt to train at.
    1.3.6.1.4.1.9.9.149.1.14.1.7 cAdslAtucCapConfDown136KBaudEnable 0 0 This object specifies whether the modem can train the
    downstream channel using a symbol rate of 136K symbols
    per second.
    1.3.6.1.4.1.9.9.149.1.14.1.8 cAdslAtucCapConfUp68KBaudEnable 0 0 This object specifies whether the modem can train the
    upstream channel using a symbol rate of 68K symbols
    per second.

    The value o…
    1.3.6.1.4.1.9.9.149.1.14.1.9 cAdslAtucCapConfUp17KBaudEnable 0 0 This object specifies whether the modem can train the
    upstream channel using a symbol rate of 17K symbols
    per second.

    The value o…
    1.3.6.1.4.1.9.9.149.1.14.1.10 cAdslAtucCapConfPsdmLevel 0 0 This managed object specifies the nominal power output of the
    ATU-C across the entire transmit spectrum. Observe that this
    impli…
    1.3.6.1.4.1.9.9.149.1.14.1.11 cAdslAturCapConfTargetSnrMgn 0 0 cAdslAturCapConftargetSnrMgn
    1.3.6.1.4.1.9.9.149.1.14.1.12 cAdslAturCapConfMinTxRate 0 0 This object specifies the minimum acceptable upstream
    line rate.
    1.3.6.1.4.1.9.9.149.1.14.1.13 cAdslAturCapConfMaxTxRate 0 0 This object specifies the desired line rate which the ATU-R
    will attempt to train at.
    1.3.6.1.4.1.9.9.149.1.14.1.14 cAdslAturCapConfPsdmLevel 0 0 This managed object specifies the nominal power output of the
    ATU-R across the entire transmit spectrum. Observe that this
    impli…