This object specifies the interleave delay for the
downstream channel. The value of this object specifies the
mapping (relative spacing) between subsequent input bytes at
the interleaver input and their placement in the bit stream
at the interleaver output. The value 'long' provides greater
separation between consecutive input bytes in the output bit
stream, thereby allowing for improved impulse noise immunity
at the expense of payload latency.
Parsed from file CISCO-ADSL-CAP-LINE-MIB.mib
Module: CISCO-ADSL-CAP-LINE-MIB
This object specifies the interleave delay for the
downstream channel. The value of this object specifies the
mapping (relative spacing) between subsequent input bytes at
the interleaver input and their placement in the bit stream
at the interleaver output. The value 'long' provides greater
separation between consecutive input bytes in the output bit
stream, thereby allowing for improved impulse noise immunity
at the expense of payload latency.
This object specifies the interleave delay for the
downstream channel. The value of this object specifies the
mapping (relative spacing) between subsequent input bytes at
the interleaver input and their placement in the bit stream
at the interleaver output. The value 'long' provides greater
separation between consecutive input bytes in the output bit
stream, thereby allowing for improved impulse noise immunity
at the expense of payload latency.
Parsed from file CISCO-ADSL-CAP-LINE-MIB.my.txt
Company: None
Module: CISCO-ADSL-CAP-LINE-MIB
This object specifies the interleave delay for the
downstream channel. The value of this object specifies the
mapping (relative spacing) between subsequent input bytes at
the interleaver input and their placement in the bit stream
at the interleaver output. The value 'long' provides greater
separation between consecutive input bytes in the output bit
stream, thereby allowing for improved impulse noise immunity
at the expense of payload latency.
cAdslLineCapConfInterleaveDelay OBJECT-TYPE SYNTAX INTEGER { none(1), short(2), long(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the interleave delay for the downstream channel. The value of this object specifies the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. The value 'long' provides greater separation between consecutive input bytes in the output bit stream, thereby allowing for improved impulse noise immunity at the expense of payload latency." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { short } ::= { cAdslLineCapConfProfileEntry 2 }
cAdslLineCapConfInterleaveDelay OBJECT-TYPE SYNTAX INTEGER { none(1), short(2), long(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the interleave delay for the downstream channel. The value of this object specifies the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. The value 'long' provides greater separation between consecutive input bytes in the output bit stream, thereby allowing for improved impulse noise immunity at the expense of payload latency." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { short } ::= { cAdslLineCapConfProfileEntry 2 }
Vendor: Cisco
Module: CISCO-ADSL-CAP-LINE-MIB
[Automatically extracted from oidview.com]
cAdslLineCapConfInterleaveDelay OBJECT-TYPE SYNTAX INTEGER { none(1), short(2), long(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the interleave delay for the downstream channel. The value of this object specifies the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. The value 'long' provides greater separation between consecutive input bytes in the output bit stream, thereby allowing for improved impulse noise immunity at the expense of payload latency." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { short } ::= { cAdslLineCapConfProfileEntry 2 }
cAdslLineCapConfInterleaveDelay OBJECT-TYPE SYNTAX INTEGER { none(1), short(2), long(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the interleave delay for the downstream channel. The value of this object specifies the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. The value 'long' provides greater separation between consecutive input bytes in the output bit stream, thereby allowing for improved impulse noise immunity at the expense of payload latency." REFERENCE "ANSI T1E1.4/99-161R3, Single-Carrier Rate Adaptive Digital Subscriber Line (RADSL)." DEFVAL { short } ::= { cAdslLineCapConfProfileEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.149.1.14.1.1 | cAdslLineCapConfTrainingMode | 0 | 0 | cAdslLineCapConftrainingMode |
| 1.3.6.1.4.1.9.9.149.1.14.1.3 | cAdslLineCapConfCpeSignature | 0 | 0 | This object specifies the value of the minimum CPE signature expected from ATU-R during training. The value of the CPE signature… |
| 1.3.6.1.4.1.9.9.149.1.14.1.4 | cAdslAtucCapConfTargetSnrMgn | 0 | 0 | cAdslAtucCapConftargetSnrMgn |
| 1.3.6.1.4.1.9.9.149.1.14.1.5 | cAdslAtucCapConfMinTxRate | 0 | 0 | This object specifies the minimum acceptable downstream line rate. |
| 1.3.6.1.4.1.9.9.149.1.14.1.6 | cAdslAtucCapConfMaxTxRate | 0 | 0 | This object specifies the desired line rate which the ATU-C will attempt to train at. |
| 1.3.6.1.4.1.9.9.149.1.14.1.7 | cAdslAtucCapConfDown136KBaudEnable | 0 | 0 | This object specifies whether the modem can train the downstream channel using a symbol rate of 136K symbols per second. |
| 1.3.6.1.4.1.9.9.149.1.14.1.8 | cAdslAtucCapConfUp68KBaudEnable | 0 | 0 | This object specifies whether the modem can train the upstream channel using a symbol rate of 68K symbols per second. The value o… |
| 1.3.6.1.4.1.9.9.149.1.14.1.9 | cAdslAtucCapConfUp17KBaudEnable | 0 | 0 | This object specifies whether the modem can train the upstream channel using a symbol rate of 17K symbols per second. The value o… |
| 1.3.6.1.4.1.9.9.149.1.14.1.10 | cAdslAtucCapConfPsdmLevel | 0 | 0 | This managed object specifies the nominal power output of the ATU-C across the entire transmit spectrum. Observe that this impli… |
| 1.3.6.1.4.1.9.9.149.1.14.1.11 | cAdslAturCapConfTargetSnrMgn | 0 | 0 | cAdslAturCapConftargetSnrMgn |
| 1.3.6.1.4.1.9.9.149.1.14.1.12 | cAdslAturCapConfMinTxRate | 0 | 0 | This object specifies the minimum acceptable upstream line rate. |
| 1.3.6.1.4.1.9.9.149.1.14.1.13 | cAdslAturCapConfMaxTxRate | 0 | 0 | This object specifies the desired line rate which the ATU-R will attempt to train at. |
| 1.3.6.1.4.1.9.9.149.1.14.1.14 | cAdslAturCapConfPsdmLevel | 0 | 0 | This managed object specifies the nominal power output of the ATU-R across the entire transmit spectrum. Observe that this impli… |