This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded down to the nearest valid
tenth dB level if the value is not in multiples of 10.
This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded down to the nearest valid
tenth dB level if the value is not in multiples of 10.
Parsed from file CISCO-SDSL-LINE-MIB.my.txt
Company: None
Module: CISCO-SDSL-LINE-MIB
This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded down to the nearest valid
tenth dB level if the value is not in multiples of 10.
cSdslStucMinSnrMgn OBJECT-TYPE SYNTAX INTEGER(0..310) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the minimum acceptable SNR margin. If the noise margin falls below this level, the STU-C will retrain. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10." DEFVAL { 0 } ::= { cSdslLineConfProfileEntry 5 }
Vendor: Cisco
Module: CISCO-SDSL-LINE-MIB
[Automatically extracted from oidview.com]
cSdslStucMinSnrMgn OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum acceptable SNR margin. If the noise margin falls below this level, the STU-C will retrain. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10." DEFVAL { 0 } ::= { cSdslLineConfProfileEntry 5 }
cSdslStucMinSnrMgn OBJECT-TYPE SYNTAX Integer32 (0..310) UNITS "tenth dB" MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the minimum acceptable SNR margin. If the noise margin falls below this level, the STU-C will retrain. The value for this object must be in multiples of 10. The specified value will be rounded down to the nearest valid tenth dB level if the value is not in multiples of 10." DEFVAL { 0 } ::= { cSdslLineConfProfileEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.155.1.14.1.1 | cSdslLineMaxRate | 0 | 0 | This object specifies the desired line rate which the STU-C will attempt to train at. |
| 1.3.6.1.4.1.9.9.155.1.14.1.2 | cSdslLineFramingMode | 0 | 0 | This object specifies the desired Transmission Convergence framing structure being used by the interface. |
| 1.3.6.1.4.1.9.9.155.1.14.1.3 | cSdslStucTargetSnrMgn | 0 | 0 | This object specifies the target SNR margin. This is the desired noise margin the STU-C must achieve with a BER of 10-7 or bette… |
| 1.3.6.1.4.1.9.9.155.1.14.1.4 | cSdslStucMaxSnrMgn | 0 | 0 | This object specifies the maximum acceptable SNR margin. If the noise margin exceeds this level, then the STU-C should attempt to… |
| 1.3.6.1.4.1.9.9.155.1.14.1.6 | cSdslStucOutputPwr | 0 | 0 | This object specifies the transmit power level used by the STU-C. The value for this object must be in multiples of 10. The speci… |
| 1.3.6.1.4.1.9.9.155.1.14.1.7 | cSdslShdslLineMaxRate | 0 | 0 | This object specifies the desired line rate at which the G.shdsl STU-C will attempt to train. |
| 1.3.6.1.4.1.9.9.155.1.14.1.8 | cSdslStucPsdMaskType | 0 | 0 | This object specifies the PSD mask type for the transceiver. For all values of the cSdslShdslLineMaxRate, the symmetric PSD maskt… |
| 1.3.6.1.4.1.9.9.155.1.14.1.9 | cSdslStucAnnex | 0 | 0 | This object specifies the operating conditions for the port of G.shdsl CO equipment . Annex A is optimized for conditions typical… |
| 1.3.6.1.4.1.9.9.155.1.14.1.10 | cSdslLineEquipmentType | 0 | 0 | This object specifies the type of the STU device ,either STU-C or STU-R |
| 1.3.6.1.4.1.9.9.155.1.14.1.11 | cSdslLineAutoRateEnable | 0 | 0 | This object specifies whether the device uses the rate adaptive training mode. |
| 1.3.6.1.4.1.9.9.155.1.14.1.12 | cSdslStucThresholdSnrMgn | 0 | 0 | This object specifies the SNR margin threshold. An appropriate alarm should be generated when the difference between the actual … |
| 1.3.6.1.4.1.9.9.155.1.14.1.13 | cSdslSturAnnex | 0 | 0 | This object specifies the operating conditions for the port of G.shdsl CPE equipment. Annex A is optimized for conditions typical… |