The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface.
Parsed from file CISCO-ISDNU-IF-MIB.mib
Module: CISCO-ISDNU-IF-MIB
The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface.
ciuIfEocCommand OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface."
REFERENCE
"ANSI T1.601-1992: Sections 8.3 Embedded operations channel
(eoc) functions"
View at oid-info.com
The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface.
Parsed from file CISCO-ISDNU-IF-MIB.my.txt
Company: None
Module: CISCO-ISDNU-IF-MIB
The last EOC command sent by Central Office; the ECO command
supports operations communications needs between the network
and ISDN U interface.
ciuIfEocCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (1..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface." REFERENCE "ANSI T1.601-1992: Sections 8.3 Embedded operations channel (eoc) functions" ::= { ciuIfStatusEntry 2 }
ciuIfEocCommand OBJECT-TYPE SYNTAX DisplayString(SIZE(1..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface." REFERENCE "ANSI T1.601-1992: Sections 8.3 Embedded operations channel (eoc) functions" ::= { ciuIfStatusEntry 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
ciuIfEocCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (1..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface." REFERENCE "ANSI T1.601-1992: Sections 8.3 Embedded operations channel (eoc) functions" ::= { ciuIfStatusEntry 2 }
ciuIfEocCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (1..48)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last EOC command sent by Central Office; the ECO command supports operations communications needs between the network and ISDN U interface." REFERENCE "ANSI T1.601-1992: Sections 8.3 Embedded operations channel (eoc) functions" ::= { ciuIfStatusEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.18.1.1.2.1.1 | ciuIfStatus | 0 | 0 | This object contains the operation status of the ISDN BRI integrated U interface. activated - The ISDN U interface is activated. T… |
| 1.3.6.1.4.1.9.9.18.1.1.2.1.3 | ciuIfOverHeadBits | 0 | 0 | This object describes 5 attributes of Overhead bits. The Overhead bits contains the ISDN U interface transceiver operations and m… |
| 1.3.6.1.4.1.9.9.18.1.1.2.1.4 | ciuIfFebeErrors | 0 | 0 | Number of Far End Block Errors (FEBE) detected since last boot. Whenever the CO (Central Office) receives a block of data from th… |
| 1.3.6.1.4.1.9.9.18.1.1.2.1.5 | ciuIfNebeErrors | 0 | 0 | Number of Near End Block Errors (NEBE) detected since last boot. Whenever the U transceiver receives a block of data with a CRC e… |
| 1.3.6.1.4.1.9.9.18.1.1.2.1.6 | ciuIfLoopStatus | 0 | 0 | Current ISDN BRI integrated U interface Loop status and NT maintenance mode. The definition of maintenance modes are as follows:… |