Reference record for OID 1.3.6.1.4.1.9.9.18.1.1.2.1.6



parent
1.3.6.1.4.1.9.9.18.1.1.2.1 (ciuIfStatusEntry)
node code
6
node name
ciuIfLoopStatus
dot oid
1.3.6.1.4.1.9.9.18.1.1.2.1.6
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfLoopStatus(6)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfLoopStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/18/1/1/2/1/6

    Description by circitor

    Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:
    none - The U interface is not in either Loopback or
    maintenance mode.
    type2Loopback - Type 2 (CO to U interface) Loopback
    mode; this mode is set to perform the loopback between
    CO and the ISDN BRI integrated U interface.
    type3Loopback - Type 3 (processor to U interface) Loopback
    mode; this mode is set by router to perform the loopback
    between the router processor and the ISDN BRI integrated
    U interface.
    ntQuietMode - NT quiet mode; this mode is set by CO for
    metallic loop tests. In the NT quiet mode, the ISDN U
    interface will not attempt a start-up or will not
    initiate transmission during metallic loop tests
    conducted by the network.
    ilmtMode - Insertion loss measurement test (ILMT); this mode
    is set by CO for the Insertion loss measurement test.
    The insertion loss measurement test will cause a known
    test signal to be generated by the NT. This test will
    be used in network measurements of DSL (Digital
    Subscriber Line) transmission characteristics.

    Parsed from file CISCO-ISDNU-IF-MIB.mib
    Module: CISCO-ISDNU-IF-MIB

    Description by cisco_v1

    Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:
    none - The U interface is not in either Loopback or
    maintenance mode.
    type2Loopback - Type 2 (CO to U interface) Loopback
    mode; this mode is set to perform the loopback between
    CO and the ISDN BRI integrated U interface.
    type3Loopback - Type 3 (processor to U interface) Loopback
    mode; this mode is set by router to perform the loopback
    between the router processor and the ISDN BRI integrated
    U interface.
    ntQuietMode - NT quiet mode; this mode is set by CO for
    metallic loop tests. In the NT quiet mode, the ISDN U
    interface will not attempt a start-up or will not
    initiate transmission during metallic loop tests
    conducted by the network.
    ilmtMode - Insertion loss measurement test (ILMT); this mode
    is set by CO for the Insertion loss measurement test.
    The insertion loss measurement test will cause a known
    test signal to be generated by the NT. This test will
    be used in network measurements of DSL (Digital
    Subscriber Line) transmission characteristics.

    Description by oid_info

    ciuIfLoopStatus OBJECT-TYPE
    SYNTAX INTEGER {
    none (1),
    type2Loopback (2),
    type3Loopback (3),
    ntQuietMode (4),
    ilmtMode (5)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:
    none - The U interface is not in either Loopback or
    maintenance mode.
    type2Loopback - Type 2 (CO to U interface) Loopback
    mode; this mode is set to perform the loopback between
    CO and the ISDN BRI integrated U interface.
    type3Loopback - Type 3 (processor to U interface) Loopback
    mode; this mode is set by router to perform the loopback
    between the router processor and the ISDN BRI integrated
    U interface.
    ntQuietMode - NT quiet mode; this mode is set by CO for
    metallic loop tests. In the NT quiet mode, the ISDN U
    interface will not attempt a start-up or will not
    initiate transmission during metallic loop tests
    conducted by the network.
    ilmtMode - Insertion loss measurement test (ILMT); this mode
    is set by CO for the Insertion loss measurement test.
    The insertion loss measurement test will cause a known
    test signal to be generated by the NT. This test will
    be used in network measurements of DSL (Digital
    Subscriber Line) transmission characteristics.
    "
    REFERENCE
    "ANSI T1.601-1992: Sections 6.5 NT maintence modes"
    View at oid-info.com

    Description by mibdepot

    Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:
    none - The U interface is not in either Loopback or
    maintenance mode.
    type2Loopback - Type 2 (CO to U interface) Loopback
    mode; this mode is set to perform the loopback between
    CO and the ISDN BRI integrated U interface.
    type3Loopback - Type 3 (processor to U interface) Loopback
    mode; this mode is set by router to perform the loopback
    between the router processor and the ISDN BRI integrated
    U interface.
    ntQuietMode - NT quiet mode; this mode is set by CO for
    metallic loop tests. In the NT quiet mode, the ISDN U
    interface will not attempt a start-up or will not
    initiate transmission during metallic loop tests
    conducted by the network.
    ilmtMode - Insertion loss measurement test (ILMT); this mode
    is set by CO for the Insertion loss measurement test.
    The insertion loss measurement test will cause a known
    test signal to be generated by the NT. This test will
    be used in network measurements of DSL (Digital
    Subscriber Line) transmission characteristics.

    Parsed from file CISCO-ISDNU-IF-MIB.my.txt
    Company: None
    Module: CISCO-ISDNU-IF-MIB

    Description by cisco

    Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:
    none - The U interface is not in either Loopback or
    maintenance mode.
    type2Loopback - Type 2 (CO to U interface) Loopback
    mode; this mode is set to perform the loopback between
    CO and the ISDN BRI integrated U interface.
    type3Loopback - Type 3 (processor to U interface) Loopback
    mode; this mode is set by router to perform the loopback
    between the router processor and the ISDN BRI integrated
    U interface.
    ntQuietMode - NT quiet mode; this mode is set by CO for
    metallic loop tests. In the NT quiet mode, the ISDN U
    interface will not attempt a start-up or will not
    initiate transmission during metallic loop tests
    conducted by the network.
    ilmtMode - Insertion loss measurement test (ILMT); this mode
    is set by CO for the Insertion loss measurement test.
    The insertion loss measurement test will cause a known
    test signal to be generated by the NT. This test will
    be used in network measurements of DSL (Digital
    Subscriber Line) transmission characteristics.

    Information by circitor

    ciuIfLoopStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                    none                  (1),
                    type2Loopback         (2),
                    type3Loopback         (3),
                    ntQuietMode           (4),
                    ilmtMode              (5) 
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Current ISDN BRI integrated U interface Loop status and
                 NT maintenance mode.  The definition of maintenance modes 
                 are as follows:
                 none - The U interface is not in either Loopback or
                      maintenance mode.
                 type2Loopback - Type 2 (CO to U interface) Loopback
                      mode; this mode is set to perform the loopback between
                      CO and the ISDN BRI integrated U interface.
                 type3Loopback - Type 3 (processor to U interface) Loopback
                      mode; this mode is set by router to perform the loopback
                      between the router processor and the ISDN BRI integrated
                      U interface.
                 ntQuietMode - NT quiet mode; this mode is set by CO for
                      metallic loop tests. In the NT quiet mode, the ISDN U 
                      interface will not attempt a start-up or will not 
                      initiate transmission during metallic loop tests 
                      conducted by the network.
                 ilmtMode - Insertion loss measurement test (ILMT); this mode 
                      is set by CO for the Insertion loss measurement test. 
                      The insertion loss measurement test will cause a known 
                      test signal to be generated by the NT. This test will 
                      be used in network measurements of DSL (Digital 
                      Subscriber Line) transmission characteristics.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 6.5 NT maintence modes"
        ::= { ciuIfStatusEntry 6 }

    Information by cisco_v1

    ciuIfLoopStatus OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type2Loopback(2),
        type3Loopback(3),
        ntQuietMode(4),
        ilmtMode(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Current ISDN BRI integrated U interface Loop status and
         NT maintenance mode.  The definition of maintenance modes 
         are as follows:
         none - The U interface is not in either Loopback or
              maintenance mode.
         type2Loopback - Type 2 (CO to U interface) Loopback
              mode; this mode is set to perform the loopback between
              CO and the ISDN BRI integrated U interface.
         type3Loopback - Type 3 (processor to U interface) Loopback
              mode; this mode is set by router to perform the loopback
              between the router processor and the ISDN BRI integrated
              U interface.
         ntQuietMode - NT quiet mode; this mode is set by CO for
              metallic loop tests. In the NT quiet mode, the ISDN U 
              interface will not attempt a start-up or will not 
              initiate transmission during metallic loop tests 
              conducted by the network.
         ilmtMode - Insertion loss measurement test (ILMT); this mode 
              is set by CO for the Insertion loss measurement test. 
              The insertion loss measurement test will cause a known 
              test signal to be generated by the NT. This test will 
              be used in network measurements of DSL (Digital 
              Subscriber Line) transmission characteristics."
    REFERENCE
        "ANSI T1.601-1992: Sections 6.5 NT maintence modes"
    ::= { ciuIfStatusEntry 6 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    ciuIfLoopStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                    none                  (1),
                    type2Loopback         (2),
                    type3Loopback         (3),
                    ntQuietMode           (4),
                    ilmtMode              (5) 
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Current ISDN BRI integrated U interface Loop status and
                 NT maintenance mode.  The definition of maintenance modes 
                 are as follows:
                 none - The U interface is not in either Loopback or
                      maintenance mode.
                 type2Loopback - Type 2 (CO to U interface) Loopback
                      mode; this mode is set to perform the loopback between
                      CO and the ISDN BRI integrated U interface.
                 type3Loopback - Type 3 (processor to U interface) Loopback
                      mode; this mode is set by router to perform the loopback
                      between the router processor and the ISDN BRI integrated
                      U interface.
                 ntQuietMode - NT quiet mode; this mode is set by CO for
                      metallic loop tests. In the NT quiet mode, the ISDN U 
                      interface will not attempt a start-up or will not 
                      initiate transmission during metallic loop tests 
                      conducted by the network.
                 ilmtMode - Insertion loss measurement test (ILMT); this mode 
                      is set by CO for the Insertion loss measurement test. 
                      The insertion loss measurement test will cause a known 
                      test signal to be generated by the NT. This test will 
                      be used in network measurements of DSL (Digital 
                      Subscriber Line) transmission characteristics.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 6.5 NT maintence modes"
        ::= { ciuIfStatusEntry 6 }

    Information by cisco

    ciuIfLoopStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                    none                  (1),
                    type2Loopback         (2),
                    type3Loopback         (3),
                    ntQuietMode           (4),
                    ilmtMode              (5) 
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "Current ISDN BRI integrated U interface Loop status and
                 NT maintenance mode.  The definition of maintenance modes 
                 are as follows:
                 none - The U interface is not in either Loopback or
                      maintenance mode.
                 type2Loopback - Type 2 (CO to U interface) Loopback
                      mode; this mode is set to perform the loopback between
                      CO and the ISDN BRI integrated U interface.
                 type3Loopback - Type 3 (processor to U interface) Loopback
                      mode; this mode is set by router to perform the loopback
                      between the router processor and the ISDN BRI integrated
                      U interface.
                 ntQuietMode - NT quiet mode; this mode is set by CO for
                      metallic loop tests. In the NT quiet mode, the ISDN U 
                      interface will not attempt a start-up or will not 
                      initiate transmission during metallic loop tests 
                      conducted by the network.
                 ilmtMode - Insertion loss measurement test (ILMT); this mode 
                      is set by CO for the Insertion loss measurement test. 
                      The insertion loss measurement test will cause a known 
                      test signal to be generated by the NT. This test will 
                      be used in network measurements of DSL (Digital 
                      Subscriber Line) transmission characteristics.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 6.5 NT maintence modes"
        ::= { ciuIfStatusEntry 6 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (5)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.18.1.1.2.1.1 ciuIfStatus 0 0 This object contains the operation status of the ISDN
    BRI integrated U interface.
    activated - The ISDN U interface is activated.
    T…
    1.3.6.1.4.1.9.9.18.1.1.2.1.2 ciuIfEocCommand 0 0 The last EOC command sent by Central Office; the ECO command
    supports operations communications needs between the network
    and ISD…
    1.3.6.1.4.1.9.9.18.1.1.2.1.3 ciuIfOverHeadBits 0 0 This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and m…
    1.3.6.1.4.1.9.9.18.1.1.2.1.4 ciuIfFebeErrors 0 0 Number of Far End Block Errors (FEBE) detected since
    last boot. Whenever the CO (Central Office) receives a
    block of data from th…
    1.3.6.1.4.1.9.9.18.1.1.2.1.5 ciuIfNebeErrors 0 0 Number of Near End Block Errors (NEBE) detected since
    last boot. Whenever the U transceiver receives a block of
    data with a CRC e…