Reference record for OID 1.3.6.1.4.1.9.9.18.1.1.2.1.3



parent
1.3.6.1.4.1.9.9.18.1.1.2.1 (ciuIfStatusEntry)
node code
3
node name
ciuIfOverHeadBits
dot oid
1.3.6.1.4.1.9.9.18.1.1.2.1.3
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoIsdnuIfMIB(18) ciuIfObjects(1) ciuInterface(1) ciuIfStatusTable(2) ciuIfStatusEntry(1) ciuIfOverHeadBits(3)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoIsdnuIfMIB/ciuIfObjects/ciuInterface/ciuIfStatusTable/ciuIfStatusEntry/ciuIfOverHeadBits
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/18/1/1/2/1/3

    Description by circitor

    This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and maintenance functions that are handled by M4,
    M5 and M6 bits in the superframe. These bits are described
    as follows:
    act - start-up bit; this bit is set to binary ONE by the
    network as a part of the start-up sequence to
    communicate readiness for layer-2 communication.
    dea - turn-off bit; this bit is set to binary ZERO by the
    network to communicate to the NT its intention to
    turn off.
    febe - Far End Block Error bit; this bit is set to binary
    ONE if there are no error in the superframe and binary
    ZERO if the superframe contains an error.
    uoa - U interface only activation bit; This bit is set to
    binary ONE if the S/T interface should be activated.
    Otherwise, this bit should be set to binary ZERO.
    aib - Alarm indication bit; this bit is set to binary
    ONE if the transmission path for D, B1, and B2 channels
    has been established all the way to the local exchange.
    Otherwise, this bit is set to binary ZERO.

    Parsed from file CISCO-ISDNU-IF-MIB.mib
    Module: CISCO-ISDNU-IF-MIB

    Description by cisco_v1

    This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and maintenance functions that are handled by M4,
    M5 and M6 bits in the superframe. These bits are described
    as follows:
    act - start-up bit; this bit is set to binary ONE by the
    network as a part of the start-up sequence to
    communicate readiness for layer-2 communication.
    dea - turn-off bit; this bit is set to binary ZERO by the
    network to communicate to the NT its intention to
    turn off.
    febe - Far End Block Error bit; this bit is set to binary
    ONE if there are no error in the superframe and binary
    ZERO if the superframe contains an error.
    uoa - U interface only activation bit; This bit is set to
    binary ONE if the S/T interface should be activated.
    Otherwise, this bit should be set to binary ZERO.
    aib - Alarm indication bit; this bit is set to binary
    ONE if the transmission path for D, B1, and B2 channels
    has been established all the way to the local exchange.
    Otherwise, this bit is set to binary ZERO.

    Description by oid_info

    ciuIfOverHeadBits OBJECT-TYPE
    -- SYNTAX BITS {
    -- act(0),
    -- dea(1),
    -- febe(2),
    -- uoa(3),
    -- aib(4)
    -- }
    SYNTAX OCTET STRING (SIZE (8))
    --
    -- As our existing mib publication tools do not support the BITS
    -- syntax, we are temporarily using a syntax of OCTET STRING.
    -- We should be able to use BITS correctly in the near future, at
    -- which time this MIB will be corrected.
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and maintenance functions that are handled by M4,
    M5 and M6 bits in the superframe. These bits are described
    as follows:
    act - start-up bit; this bit is set to binary ONE by the
    network as a part of the start-up sequence to
    communicate readiness for layer-2 communication.
    dea - turn-off bit; this bit is set to binary ZERO by the
    network to communicate to the NT its intention to
    turn off.
    febe - Far End Block Error bit; this bit is set to binary
    ONE if there are no error in the superframe and binary
    ZERO if the superframe contains an error.
    uoa - U interface only activation bit; This bit is set to
    binary ONE if the S/T interface should be activated.
    Otherwise, this bit should be set to binary ZERO.
    aib - Alarm indication bit; this bit is set to binary
    ONE if the transmission path for D, B1, and B2 channels
    has been established all the way to the local exchange.
    Otherwise, this bit is set to binary ZERO.
    "
    REFERENCE
    "ANSI T1.601-1992: Sections 8.2 Overhead bit functions"
    View at oid-info.com

    Description by mibdepot

    This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and maintenance functions that are handled by M4,
    M5 and M6 bits in the superframe. These bits are described
    as follows:
    act - start-up bit; this bit is set to binary ONE by the
    network as a part of the start-up sequence to
    communicate readiness for layer-2 communication.
    dea - turn-off bit; this bit is set to binary ZERO by the
    network to communicate to the NT its intention to
    turn off.
    febe - Far End Block Error bit; this bit is set to binary
    ONE if there are no error in the superframe and binary
    ZERO if the superframe contains an error.
    uoa - U interface only activation bit; This bit is set to
    binary ONE if the S/T interface should be activated.
    Otherwise, this bit should be set to binary ZERO.
    aib - Alarm indication bit; this bit is set to binary
    ONE if the transmission path for D, B1, and B2 channels
    has been established all the way to the local exchange.
    Otherwise, this bit is set to binary ZERO.

    Parsed from file CISCO-ISDNU-IF-MIB.my.txt
    Company: None
    Module: CISCO-ISDNU-IF-MIB

    Description by cisco

    This object describes 5 attributes of Overhead bits. The
    Overhead bits contains the ISDN U interface transceiver
    operations and maintenance functions that are handled by M4,
    M5 and M6 bits in the superframe. These bits are described
    as follows:
    act - start-up bit; this bit is set to binary ONE by the
    network as a part of the start-up sequence to
    communicate readiness for layer-2 communication.
    dea - turn-off bit; this bit is set to binary ZERO by the
    network to communicate to the NT its intention to
    turn off.
    febe - Far End Block Error bit; this bit is set to binary
    ONE if there are no error in the superframe and binary
    ZERO if the superframe contains an error.
    uoa - U interface only activation bit; This bit is set to
    binary ONE if the S/T interface should be activated.
    Otherwise, this bit should be set to binary ZERO.
    aib - Alarm indication bit; this bit is set to binary
    ONE if the transmission path for D, B1, and B2 channels
    has been established all the way to the local exchange.
    Otherwise, this bit is set to binary ZERO.

    Information by circitor

    ciuIfOverHeadBits OBJECT-TYPE







        SYNTAX  OCTET STRING  (SIZE  (8))






        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "This object describes 5 attributes of Overhead bits. The
                 Overhead bits contains the ISDN U interface transceiver 
                 operations and maintenance functions that are handled by M4,
                 M5 and M6 bits in the superframe. These bits are described 
                 as follows:  
                 act  - start-up bit; this bit is set to binary ONE by the 
                        network as a part of the start-up sequence to 
                        communicate readiness for layer-2 communication.
                 dea  - turn-off bit; this bit is set to binary ZERO by the 
                        network to communicate to the NT its intention to
                        turn off.
                 febe - Far End Block Error bit; this bit is set to binary
                        ONE if there are no error in the superframe and binary
                        ZERO if the superframe contains an error.
                 uoa  - U interface only activation bit; This bit is set to 
                        binary ONE if the S/T interface should be activated. 
                        Otherwise, this bit should be set to binary ZERO.
                 aib  - Alarm indication bit; this bit is set to binary
                        ONE if the transmission path for D, B1, and B2 channels
                        has been established all the way to the local exchange.
                        Otherwise, this bit is set to binary ZERO.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 8.2 Overhead bit functions"
        ::= { ciuIfStatusEntry 3 }

    Information by cisco_v1

    ciuIfOverHeadBits OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(8))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object describes 5 attributes of Overhead bits. The
         Overhead bits contains the ISDN U interface transceiver 
         operations and maintenance functions that are handled by M4,
         M5 and M6 bits in the superframe. These bits are described 
         as follows:  
         act  - start-up bit; this bit is set to binary ONE by the 
                network as a part of the start-up sequence to 
                communicate readiness for layer-2 communication.
         dea  - turn-off bit; this bit is set to binary ZERO by the 
                network to communicate to the NT its intention to
                turn off.
         febe - Far End Block Error bit; this bit is set to binary
                ONE if there are no error in the superframe and binary
                ZERO if the superframe contains an error.
         uoa  - U interface only activation bit; This bit is set to 
                binary ONE if the S/T interface should be activated. 
                Otherwise, this bit should be set to binary ZERO.
         aib  - Alarm indication bit; this bit is set to binary
                ONE if the transmission path for D, B1, and B2 channels
                has been established all the way to the local exchange.
                Otherwise, this bit is set to binary ZERO."
    REFERENCE
        "ANSI T1.601-1992: Sections 8.2 Overhead bit functions"
    ::= { ciuIfStatusEntry 3 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    ciuIfOverHeadBits OBJECT-TYPE







        SYNTAX  OCTET STRING  (SIZE  (8))






        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "This object describes 5 attributes of Overhead bits. The
                 Overhead bits contains the ISDN U interface transceiver 
                 operations and maintenance functions that are handled by M4,
                 M5 and M6 bits in the superframe. These bits are described 
                 as follows:  
                 act  - start-up bit; this bit is set to binary ONE by the 
                        network as a part of the start-up sequence to 
                        communicate readiness for layer-2 communication.
                 dea  - turn-off bit; this bit is set to binary ZERO by the 
                        network to communicate to the NT its intention to
                        turn off.
                 febe - Far End Block Error bit; this bit is set to binary
                        ONE if there are no error in the superframe and binary
                        ZERO if the superframe contains an error.
                 uoa  - U interface only activation bit; This bit is set to 
                        binary ONE if the S/T interface should be activated. 
                        Otherwise, this bit should be set to binary ZERO.
                 aib  - Alarm indication bit; this bit is set to binary
                        ONE if the transmission path for D, B1, and B2 channels
                        has been established all the way to the local exchange.
                        Otherwise, this bit is set to binary ZERO.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 8.2 Overhead bit functions"
        ::= { ciuIfStatusEntry 3 }

    Information by cisco

    ciuIfOverHeadBits OBJECT-TYPE







        SYNTAX  OCTET STRING  (SIZE  (8))






        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "This object describes 5 attributes of Overhead bits. The
                 Overhead bits contains the ISDN U interface transceiver 
                 operations and maintenance functions that are handled by M4,
                 M5 and M6 bits in the superframe. These bits are described 
                 as follows:  
                 act  - start-up bit; this bit is set to binary ONE by the 
                        network as a part of the start-up sequence to 
                        communicate readiness for layer-2 communication.
                 dea  - turn-off bit; this bit is set to binary ZERO by the 
                        network to communicate to the NT its intention to
                        turn off.
                 febe - Far End Block Error bit; this bit is set to binary
                        ONE if there are no error in the superframe and binary
                        ZERO if the superframe contains an error.
                 uoa  - U interface only activation bit; This bit is set to 
                        binary ONE if the S/T interface should be activated. 
                        Otherwise, this bit should be set to binary ZERO.
                 aib  - Alarm indication bit; this bit is set to binary
                        ONE if the transmission path for D, B1, and B2 channels
                        has been established all the way to the local exchange.
                        Otherwise, this bit is set to binary ZERO.
                "
        REFERENCE
                "ANSI T1.601-1992: Sections 8.2 Overhead bit functions"
        ::= { ciuIfStatusEntry 3 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (5)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.18.1.1.2.1.1 ciuIfStatus 0 0 This object contains the operation status of the ISDN
    BRI integrated U interface.
    activated - The ISDN U interface is activated.
    T…
    1.3.6.1.4.1.9.9.18.1.1.2.1.2 ciuIfEocCommand 0 0 The last EOC command sent by Central Office; the ECO command
    supports operations communications needs between the network
    and ISD…
    1.3.6.1.4.1.9.9.18.1.1.2.1.4 ciuIfFebeErrors 0 0 Number of Far End Block Errors (FEBE) detected since
    last boot. Whenever the CO (Central Office) receives a
    block of data from th…
    1.3.6.1.4.1.9.9.18.1.1.2.1.5 ciuIfNebeErrors 0 0 Number of Near End Block Errors (NEBE) detected since
    last boot. Whenever the U transceiver receives a block of
    data with a CRC e…
    1.3.6.1.4.1.9.9.18.1.1.2.1.6 ciuIfLoopStatus 0 0 Current ISDN BRI integrated U interface Loop status and
    NT maintenance mode. The definition of maintenance modes
    are as follows:…