This object specifies whether filtered packets
will be logged by the filtering subsystem or not.
If it is true(1), then all packets will be logged.
If it is false(2), then no packet will be logged.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.mib
Module: CISCO-IP-PROTOCOL-FILTER-MIB
This object specifies whether filtered packets
will be logged by the filtering subsystem or not.
If it is true(1), then all packets will be logged.
If it is false(2), then no packet will be logged.
This object specifies whether filtered packets
will be logged by the filtering subsystem or not.
If it is true(1), then all packets will be logged.
If it is false(2), then no packet will be logged.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.my.txt
Company: None
Module: CISCO-IP-PROTOCOL-FILTER-MIB
This object specifies whether filtered packets
will be logged by the filtering subsystem or not.
If it is true(1), then all packets will be logged.
If it is false(2), then no packet will be logged.
cippfIpFilterLogEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether filtered packets will be logged by the filtering subsystem or not. If it is true(1), then all packets will be logged. If it is false(2), then no packet will be logged." DEFVAL { false } ::= { cippfIpFilterEntry 16 }
cippfIpFilterLogEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies whether filtered packets will be logged by the filtering subsystem or not. If it is true(1), then all packets will be logged. If it is false(2), then no packet will be logged." DEFVAL { false } ::= { cippfIpFilterEntry 16 }
Vendor: Cisco
Module: CISCO-IP-PROTOCOL-FILTER-MIB
[Automatically extracted from oidview.com]
cippfIpFilterLogEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether filtered packets will be logged by the filtering subsystem or not. If it is true(1), then all packets will be logged. If it is false(2), then no packet will be logged." DEFVAL { false } ::= { cippfIpFilterEntry 16 }
cippfIpFilterLogEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies whether filtered packets will be logged by the filtering subsystem or not. If it is true(1), then all packets will be logged. If it is false(2), then no packet will be logged." DEFVAL { false } ::= { cippfIpFilterEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.278.1.1.3.1.1 | cippfIpFilterIndex | 0 | 0 | This index uniquely identifies the IP protocol filters within this table and among all filter profiles. When a new filter is add… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.2 | cippfIpFilterOrderPosition | 0 | 0 | This object is used to order the IP protocol filters within a filter profile. The filter with the lowest order position number i… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.3 | cippfIpFilterAction | 0 | 0 | If it is set to deny(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.4 | cippfIpFilterAddressType | 0 | 0 | This is the IP address type of for the cippfIpFilterSrcAddress, cippfIpFilterSrcMask, cippfIpFilterDestAddress, and cippfIpFilter… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.5 | cippfIpFilterSrcAddress | 0 | 0 | The source IP address to be matched for this filter. A value of zero causes all source address to match. The object value has to … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.6 | cippfIpFilterSrcMask | 0 | 0 | This is the wildcard mask for the cippfIpFilterSrcAddress bits that must match. 0 bits in the mask indicate the corresponding bi… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.7 | cippfIpFilterDestAddress | 0 | 0 | The destination IP address to be matched for this filter. A value of zero causes all source address to match. The object value … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.8 | cippfIpFilterDestMask | 0 | 0 | This is the wildcard mask for the cippfIpFilterDestAddress bits that must match. 0 bits in the mask indicate the corresponding b… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.9 | cippfIpFilterProtocol | 0 | 0 | This filter protocol object matches the Internet Protocol Number in the packets. These IP numbers are defined in the Network Wor… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.10 | cippfIpFilterSrcPortLow | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.11 | cippfIpFilterSrcPortHigh | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.12 | cippfIpFilterDestPortLow | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is t… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.13 | cippfIpFilterDestPortHigh | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is t… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.14 | cippfIpFilterPrecedence | 0 | 0 | The IP traffic precedence parameters in each packet are used to guide the selection of the actual service parameters when transmi… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.15 | cippfIpFilterTos | 0 | 0 | This is the value to match to the Type of Service (TOS) of the packet. The TOS values ranges from '0' to '15'. The value '-1' m… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.17 | cippfIpFilterStatus | 0 | 0 | This object controls and reflects the status of rows in this table. Creation of rows must be done via 'createAndGo' and this obj… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.18 | cippfIpFilterICMPType | 0 | 0 | This filter specifies the ICMP message type to be matched. Setting this object to '-1' will make the filtering match any ICMP mes… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.19 | cippfIpFilterTCPEstablished | 0 | 0 | This filter if 'true' specifies that for TCP protocol, in an established connection, a match occurs if the TCP datagram has the A… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.20 | cippfIpFilterFragments | 0 | 0 | If 'true', this filter applies only to the second and further fragments of fragmented packets. If 'false', the filter will only m… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.21 | cippfIpFilterICMPCode | 0 | 0 | This filter specifies the ICMP message code to be matched. Setting this object to '-1' will make the filtering match any ICMP cod… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.22 | cippfIpFilterSrcIPGroupName | 0 | 0 | This object identifies the filter group containing information about source IP addresses and masks that need to be matched for th… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.23 | cippfIpFilterDstIPGroupName | 0 | 0 | This object identifies the filter group containing information about destination IP addresses and masks that need to be matched f… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.24 | cippfIpFilterProtocolGroupName | 0 | 0 | This object identifies the filter group containing information about internet protocol numbers. This value must match an entry in… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.25 | cippfIpFilterSrcServiceGroupName | 0 | 0 | This object identifies the filter group containing information about port(TCP/UDP) numbers. This value must match an entry in cfg… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.26 | cippfIpFilterDstServiceGroupName | 0 | 0 | This object identifies the filter group containing information about port(TCP/UDP) numbers. This value must match an entry in cfg… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.27 | cippfIpFilterICMPGroupName | 0 | 0 | This object identifies the filter group containing information about ICMP message. This value must match an entry in cfgFilterGr… |