This filter specifies the ICMP message code to be
matched. Setting this object to '-1' will make the
filtering match any ICMP code.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.mib
Module: CISCO-IP-PROTOCOL-FILTER-MIB
This filter specifies the ICMP message code to be
matched. Setting this object to '-1' will make the
filtering match any ICMP code.
This filter specifies the ICMP message code to be
matched. Setting this object to '-1' will make the
filtering match any ICMP code.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.my.txt
Company: None
Module: CISCO-IP-PROTOCOL-FILTER-MIB
This filter specifies the ICMP message code to be
matched. Setting this object to '-1' will make the
filtering match any ICMP code.
cippfIpFilterICMPCode OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This filter specifies the ICMP message code to be matched. Setting this object to '-1' will make the filtering match any ICMP code." REFERENCE "RFC-792 INTERNET CONTROL MESSAGE PROTOCOL" DEFVAL { -1 } ::= { cippfIpFilterEntry 21 }
cippfIpFilterICMPCode OBJECT-TYPE SYNTAX INTEGER(-1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This filter specifies the ICMP message code to be matched. Setting this object to '-1' will make the filtering match any ICMP code." REFERENCE "RFC-792 INTERNET CONTROL MESSAGE PROTOCOL" DEFVAL { -1 } ::= { cippfIpFilterEntry 21 }
Vendor: Cisco
Module: CISCO-IP-PROTOCOL-FILTER-MIB
[Automatically extracted from oidview.com]
cippfIpFilterICMPCode OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This filter specifies the ICMP message code to be matched. Setting this object to '-1' will make the filtering match any ICMP code." REFERENCE "RFC-792 INTERNET CONTROL MESSAGE PROTOCOL" DEFVAL { -1 } ::= { cippfIpFilterEntry 21 }
cippfIpFilterICMPCode OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This filter specifies the ICMP message code to be matched. Setting this object to '-1' will make the filtering match any ICMP code." REFERENCE "RFC-792 INTERNET CONTROL MESSAGE PROTOCOL" DEFVAL { -1 } ::= { cippfIpFilterEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.278.1.1.3.1.1 | cippfIpFilterIndex | 0 | 0 | This index uniquely identifies the IP protocol filters within this table and among all filter profiles. When a new filter is add… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.2 | cippfIpFilterOrderPosition | 0 | 0 | This object is used to order the IP protocol filters within a filter profile. The filter with the lowest order position number i… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.3 | cippfIpFilterAction | 0 | 0 | If it is set to deny(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.4 | cippfIpFilterAddressType | 0 | 0 | This is the IP address type of for the cippfIpFilterSrcAddress, cippfIpFilterSrcMask, cippfIpFilterDestAddress, and cippfIpFilter… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.5 | cippfIpFilterSrcAddress | 0 | 0 | The source IP address to be matched for this filter. A value of zero causes all source address to match. The object value has to … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.6 | cippfIpFilterSrcMask | 0 | 0 | This is the wildcard mask for the cippfIpFilterSrcAddress bits that must match. 0 bits in the mask indicate the corresponding bi… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.7 | cippfIpFilterDestAddress | 0 | 0 | The destination IP address to be matched for this filter. A value of zero causes all source address to match. The object value … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.8 | cippfIpFilterDestMask | 0 | 0 | This is the wildcard mask for the cippfIpFilterDestAddress bits that must match. 0 bits in the mask indicate the corresponding b… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.9 | cippfIpFilterProtocol | 0 | 0 | This filter protocol object matches the Internet Protocol Number in the packets. These IP numbers are defined in the Network Wor… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.10 | cippfIpFilterSrcPortLow | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.11 | cippfIpFilterSrcPortHigh | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be … |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.12 | cippfIpFilterDestPortLow | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is t… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.13 | cippfIpFilterDestPortHigh | 0 | 0 | If cippfIpFilterProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is t… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.14 | cippfIpFilterPrecedence | 0 | 0 | The IP traffic precedence parameters in each packet are used to guide the selection of the actual service parameters when transmi… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.15 | cippfIpFilterTos | 0 | 0 | This is the value to match to the Type of Service (TOS) of the packet. The TOS values ranges from '0' to '15'. The value '-1' m… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.16 | cippfIpFilterLogEnabled | 0 | 0 | This object specifies whether filtered packets will be logged by the filtering subsystem or not. If it is true(1), then all packe… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.17 | cippfIpFilterStatus | 0 | 0 | This object controls and reflects the status of rows in this table. Creation of rows must be done via 'createAndGo' and this obj… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.18 | cippfIpFilterICMPType | 0 | 0 | This filter specifies the ICMP message type to be matched. Setting this object to '-1' will make the filtering match any ICMP mes… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.19 | cippfIpFilterTCPEstablished | 0 | 0 | This filter if 'true' specifies that for TCP protocol, in an established connection, a match occurs if the TCP datagram has the A… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.20 | cippfIpFilterFragments | 0 | 0 | If 'true', this filter applies only to the second and further fragments of fragmented packets. If 'false', the filter will only m… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.22 | cippfIpFilterSrcIPGroupName | 0 | 0 | This object identifies the filter group containing information about source IP addresses and masks that need to be matched for th… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.23 | cippfIpFilterDstIPGroupName | 0 | 0 | This object identifies the filter group containing information about destination IP addresses and masks that need to be matched f… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.24 | cippfIpFilterProtocolGroupName | 0 | 0 | This object identifies the filter group containing information about internet protocol numbers. This value must match an entry in… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.25 | cippfIpFilterSrcServiceGroupName | 0 | 0 | This object identifies the filter group containing information about port(TCP/UDP) numbers. This value must match an entry in cfg… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.26 | cippfIpFilterDstServiceGroupName | 0 | 0 | This object identifies the filter group containing information about port(TCP/UDP) numbers. This value must match an entry in cfg… |
| 1.3.6.1.4.1.9.9.278.1.1.3.1.27 | cippfIpFilterICMPGroupName | 0 | 0 | This object identifies the filter group containing information about ICMP message. This value must match an entry in cfgFilterGr… |