The MIB module is for management of information
to support packet filtering on IP protocols.
The cippfIpProfileTable allows users to create
delete, and get information about filter profiles.
Filter profiles are uniquely identified by the
profile names. Filter profiles can either be of
Simple or Extended usage types, and the usage type
cannot be changed once it has been created.
The cippfIfIpProfileTable applies the filtering
profiles to device interfaces running IP. A filter
profile can be applied to multiple interfaces.
The cippfIpFilterTable contains ordered lists of
IP filters for all the filtering profiles.
Filters and profiles are related if they are of
the same filter profile name. Filters can only
be created if their associated filter profiles
already exist in the cippfIpProfileTable.
Filters of the same profile name belongs to a
common profile.
The cippfIfIpProfileTable can be configured with
information independent from the other. However,
if the name of a profile in the cippfIfIpProfileTable
matches that of any profile in the
cippfIpProfileTable and the profile name of any
filter entry in the cippfIpFilterTable, the profile
is 'active' and the filter entry is being applied
to IP traffic passing through the attached device
interfaces. Therefore, any change to the filters
in the cippfIpFilterTable or the profile itself in
the cippfIpProfileTable will affect all the
attached interfaces.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.mib
Module: CISCO-IP-PROTOCOL-FILTER-MIB
The MIB module is for management of information
to support packet filtering on IP protocols.
The cippfIpProfileTable allows users to create
delete, and get information about filter profiles.
Filter profiles are uniquely identified by the
profile names. Filter profiles can either be of
Simple or Extended usage types, and the usage type
cannot be changed once it has been created.
The cippfIfIpProfileTable applies the filtering
profiles to device interfaces running IP. A filter
profile can be applied to multiple interfaces.
The cippfIpFilterTable contains ordered lists of
IP filters for all the filtering profiles.
Filters and profiles are related if they are of
the same filter profile name. Filters can only
be created if their associated filter profiles
already exist in the cippfIpProfileTable.
Filters of the same profile name belongs to a
common profile.
The cippfIfIpProfileTable can be configured with
information independent from the other. However,
if the name of a profile in the cippfIfIpProfileTable
matches that of any profile in the
cippfIpProfileTable and the profile name of any
filter entry in the cippfIpFilterTable, the profile
is 'active' and the filter entry is being applied
to IP traffic passing through the attached device
interfaces. Therefore, any change to the filters
in the cippfIpFilterTable or the profile itself in
the cippfIpProfileTable will affect all the
attached interfaces.
Parsed from file CISCO-IP-PROTOCOL-FILTER-MIB.my.txt
Company: None
Module: CISCO-IP-PROTOCOL-FILTER-MIB
The MIB module is for management of information
to support packet filtering on IP protocols.
The cippfIpProfileTable allows users to create
delete, and get information about filter profiles.
Filter profiles are uniquely identified by the
profile names. Filter profiles can either be of
Simple or Extended usage types, and the usage type
cannot be changed once it has been created.
The cippfIfIpProfileTable applies the filtering
profiles to device interfaces running IP. A filter
profile can be applied to multiple interfaces.
The cippfIpFilterTable contains ordered lists of
IP filters for all the filtering profiles.
Filters and profiles are related if they are of
the same filter profile name. Filters can only
be created if their associated filter profiles
already exist in the cippfIpProfileTable.
Filters of the same profile name belongs to a
common profile.
The cippfIfIpProfileTable can be configured with
information independent from the other. However,
if the name of a profile in the cippfIfIpProfileTable
matches that of any profile in the
cippfIpProfileTable and the profile name of any
filter entry in the cippfIpFilterTable, the profile
is 'active' and the filter entry is being applied
to IP traffic passing through the attached device
interfaces. Therefore, any change to the filters
in the cippfIpFilterTable or the profile itself in
the cippfIpProfileTable will affect all the
attached interfaces.
ciscoIpProtocolMIB MODULE-IDENTITY LAST-UPDATED "200504200000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users to create delete, and get information about filter profiles. Filter profiles are uniquely identified by the profile names. Filter profiles can either be of Simple or Extended usage types, and the usage type cannot be changed once it has been created. The cippfIfIpProfileTable applies the filtering profiles to device interfaces running IP. A filter profile can be applied to multiple interfaces. The cippfIpFilterTable contains ordered lists of IP filters for all the filtering profiles. Filters and profiles are related if they are of the same filter profile name. Filters can only be created if their associated filter profiles already exist in the cippfIpProfileTable. Filters of the same profile name belongs to a common profile. The cippfIfIpProfileTable can be configured with information independent from the other. However, if the name of a profile in the cippfIfIpProfileTable matches that of any profile in the cippfIpProfileTable and the profile name of any filter entry in the cippfIpFilterTable, the profile is 'active' and the filter entry is being applied to IP traffic passing through the attached device interfaces. Therefore, any change to the filters in the cippfIpFilterTable or the profile itself in the cippfIpProfileTable will affect all the attached interfaces." REVISION "200504200000Z" DESCRIPTION "- Added 'extendedIPv6' enumeration in cippfIpProfileType. - Added following enumerations in cippfIfIpProfileDirection. inboundIPv6 (3) outboundIPv6 (4). - Added following objects in cippfIpFilterTable: cippfIpFilterSrcIPGroupName cippfIpFilterDstIPGroupName cippfIpFilterProtocolGroupName cippfIpFilterSrcServiceGroupName cippfIpFilterDstServiceGroupName cippfIpFilterICMPGroupName. - Added following tables cippfIpFilterExtTable. cippfIpFilterStatsTable." REVISION "200306160000Z" DESCRIPTION "Added following objects to cippfIpFilterTable: cippfIpFilterICMPType,cippfIpFilterEstablished, cippfIpFilterFragments,cippfIpFilterICMPCode. Updated the conformance statement." REVISION "200207110000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 278 }
ciscoIpProtocolMIB OBJECT IDENTIFIER ::= { ciscoMgmt 278 }
Vendor: Cisco
Module: CISCO-IP-PROTOCOL-FILTER-MIB
[Automatically extracted from oidview.com]
ciscoIpProtocolMIB MODULE-IDENTITY LAST-UPDATED "200504200000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users to create delete, and get information about filter profiles. Filter profiles are uniquely identified by the profile names. Filter profiles can either be of Simple or Extended usage types, and the usage type cannot be changed once it has been created. The cippfIfIpProfileTable applies the filtering profiles to device interfaces running IP. A filter profile can be applied to multiple interfaces. The cippfIpFilterTable contains ordered lists of IP filters for all the filtering profiles. Filters and profiles are related if they are of the same filter profile name. Filters can only be created if their associated filter profiles already exist in the cippfIpProfileTable. Filters of the same profile name belongs to a common profile. The cippfIfIpProfileTable can be configured with information independent from the other. However, if the name of a profile in the cippfIfIpProfileTable matches that of any profile in the cippfIpProfileTable and the profile name of any filter entry in the cippfIpFilterTable, the profile is 'active' and the filter entry is being applied to IP traffic passing through the attached device interfaces. Therefore, any change to the filters in the cippfIpFilterTable or the profile itself in the cippfIpProfileTable will affect all the attached interfaces." REVISION "200504200000Z" DESCRIPTION "- Added 'extendedIPv6' enumeration in cippfIpProfileType. - Added following enumerations in cippfIfIpProfileDirection. inboundIPv6 (3) outboundIPv6 (4). - Added following objects in cippfIpFilterTable: cippfIpFilterSrcIPGroupName cippfIpFilterDstIPGroupName cippfIpFilterProtocolGroupName cippfIpFilterSrcServiceGroupName cippfIpFilterDstServiceGroupName cippfIpFilterICMPGroupName. - Added following tables cippfIpFilterExtTable. cippfIpFilterStatsTable." REVISION "200306160000Z" DESCRIPTION "Added following objects to cippfIpFilterTable: cippfIpFilterICMPType,cippfIpFilterEstablished, cippfIpFilterFragments,cippfIpFilterICMPCode. Updated the conformance statement." REVISION "200207110000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 278 }
ciscoIpProtocolMIB MODULE-IDENTITY LAST-UPDATED "200504200000Z" ORGANIZATION "Cisco System Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users to create delete, and get information about filter profiles. Filter profiles are uniquely identified by the profile names. Filter profiles can either be of Simple or Extended usage types, and the usage type cannot be changed once it has been created. The cippfIfIpProfileTable applies the filtering profiles to device interfaces running IP. A filter profile can be applied to multiple interfaces. The cippfIpFilterTable contains ordered lists of IP filters for all the filtering profiles. Filters and profiles are related if they are of the same filter profile name. Filters can only be created if their associated filter profiles already exist in the cippfIpProfileTable. Filters of the same profile name belongs to a common profile. The cippfIfIpProfileTable can be configured with information independent from the other. However, if the name of a profile in the cippfIfIpProfileTable matches that of any profile in the cippfIpProfileTable and the profile name of any filter entry in the cippfIpFilterTable, the profile is 'active' and the filter entry is being applied to IP traffic passing through the attached device interfaces. Therefore, any change to the filters in the cippfIpFilterTable or the profile itself in the cippfIpProfileTable will affect all the attached interfaces." REVISION "200504200000Z" DESCRIPTION "- Added 'extendedIPv6' enumeration in cippfIpProfileType. - Added following enumerations in cippfIfIpProfileDirection. inboundIPv6 (3) outboundIPv6 (4). - Added following objects in cippfIpFilterTable: cippfIpFilterSrcIPGroupName cippfIpFilterDstIPGroupName cippfIpFilterProtocolGroupName cippfIpFilterSrcServiceGroupName cippfIpFilterDstServiceGroupName cippfIpFilterICMPGroupName. - Added following tables cippfIpFilterExtTable. cippfIpFilterStatsTable." REVISION "200306160000Z" DESCRIPTION "Added following objects to cippfIpFilterTable: cippfIpFilterICMPType,cippfIpFilterEstablished, cippfIpFilterFragments,cippfIpFilterICMPCode. Updated the conformance statement." REVISION "200207110000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 278 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.278.0 | ciscoIpProtocolFilterMIBNotifs | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.278.1 | ciscoIpProtocolFilterMIBObjects | 2 | 50 | None |
| 1.3.6.1.4.1.9.9.278.2 | ciscoIpProtocolFilterMIBConform | 2 | 10 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
| 1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
| 1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
| 1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
| 1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
| 1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
| 1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
| 1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
| 1.3.6.1.4.1.9.9.245 | ciscoGtpDirectorMIB | 3 | 35 | This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that s… |
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | 3 | 65 | This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be consi… |
| 1.3.6.1.4.1.9.9.248 | ciscoItpSp2MIB | 3 | 30 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This … |
| 1.3.6.1.4.1.9.9.249 | ciscoEnhancedImageMIB | 2 | 44 | Initial version of the MIB. This MIB has Image table containing the following information related to the running IOS image 1. Enti… |
| 1.3.6.1.4.1.9.9.252 | cTapMIB | 3 | 80 | This module manages Cisco's intercept feature. |
| 1.3.6.1.4.1.9.9.253 | ciscoItpXuaMIB | 3 | 250 | The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cis… |
| 1.3.6.1.4.1.9.9.254 | ciscoSlbExtMIB | 3 | 425 | The extended MIB for managing Server Load Balancing Manager(s). This MIB extends the SLB management functionality in the CISCO-SL… |
| 1.3.6.1.4.1.9.9.255 | ciscoFabricMcastMIB | 3 | 30 | Fabric Multicast Resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource related informa… |
| 1.3.6.1.4.1.9.9.256 | ciscoFabricMcastApplMIB | 3 | 16 | Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application rel… |
| 1.3.6.1.4.1.9.9.257 | ciscoFabricHfrMIB | 3 | 90 | Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fa… |
| 1.3.6.1.4.1.9.9.259 | ciscoPsaMicrocodeMIB | 3 | 24 | Cisco PSA Microcode MIB - Overview The PSA is the Packet Switching ASIC used in module like engine 2(E2) line cards in GSR for IP … |
| 1.3.6.1.4.1.9.9.260 | ciscoSsgMIB | 3 | 218 | The MIB Module manages Service Selection Gateway(SSG) devices. Service Selection Gateway(SSG) is a switching solution for service… |
| 1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | 2 | 18 | This MIB module contains extensions to the PTOPO-MIB that provide support to distinguish between bidirectional and unidirectional… |
| 1.3.6.1.4.1.9.9.262 | ciscoVoaMIB | 2 | 14 | This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically … |
| 1.3.6.1.4.1.9.9.263 | ciscoIgmpSnoopingMIB | 3 | 286 | The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to ind… |
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | 3 | 72 | This MIB module defines objects to monitor optical characteristics and set corresponding thresholds on the optical interfaces in … |
| 1.3.6.1.4.1.9.9.265 | ciscoEntityPfeMib | 3 | 58 | The Packet Forwarding Engine technology are Cisco developed Network Processors, which accelerates certain features in order to pr… |
| 1.3.6.1.4.1.9.9.268 | ciscoWlanVlanMIB | 3 | 41 | This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS AES Advanced… |
| 1.3.6.1.4.1.9.9.269 | ciscoTBridgeDevIfMIB | 2 | 20 | This MIB module provides network management support for configuration and status information of devices supporting transparent br… |
| 1.3.6.1.4.1.9.9.270 | ciscoSyslogEventExtMIB | 2 | 21 | This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as devi… |
| 1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
| 1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
| 1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
| 1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
| 1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
| 1.3.6.1.4.1.9.9.281 | ciscoFabricC12kMIB | 3 | 135 | Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities an… |
| 1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
| 1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
| 1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
| 1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
| 1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
| 1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
| 1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
| 1.3.6.1.4.1.9.9.297 | ciscoFcsMIB | 2 | 122 | The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB ena… |
| 1.3.6.1.4.1.9.9.299 | ciscoExtScsiMIB | 2 | 68 | The Cisco extension to CISCO-SCSI-MIB which is a copy of the Internet draft, the SCSI-MIB, from the IETF. Glossary of terms used i… |
| 1.3.6.1.4.1.9.9.300 | ciscoCallHomeMIB | 3 | 324 | The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deployin… |
| 1.3.6.1.4.1.9.9.301 | ciscoSyslogExtMIB | 2 | 44 | MIB module for configuring and monitoring System Log related management parameters as defined by RFC 3164. |
| 1.3.6.1.4.1.9.9.302 | ciscoDmMIB | 2 | 85 | The MIB module for the domain management functionality defined by the Fibre Channel standards (FC-SW2). For the purposes of this … |
| 1.3.6.1.4.1.9.9.305 | ciscoSystemExtMIB | 3 | 112 | MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on co… |
| 1.3.6.1.4.1.9.9.309 | ciscoIPIfMIB | 3 | 40 | The MIB module for configuring IP characteristics of the interfaces of a device. |
| 1.3.6.1.4.1.9.9.311 | ciscoEpmNotificationMIB | 3 | 48 | Notifications directly from hardware and software and processed notifications from various management applications can be furthe… |
| 1.3.6.1.4.1.9.9.312 | ciscoDataCollectionMIB | 3 | 84 | The MIB module allows a management application to select a set of MIB object instances whose values need to be collected on a per… |
| 1.3.6.1.4.1.9.9.313 | ciscoL2ControlMIB | 3 | 113 | The CISCO-L2-CONTROL-MIB is used to control some layer 2 functions, including MAC limit function and unicast flooding. This devi… |
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | 3 | 225 | The MIB module is an extension of CISCO-CAS-IF-MIB. It defines the attributes of a voice interface. |
| 1.3.6.1.4.1.9.9.315 | ciscoPortSecurityMIB | 3 | 89 | The MIB module for managing Cisco Port Security. |
| 1.3.6.1.4.1.9.9.317 | ciscoIscsiGwMIB | 3 | 145 | MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiat… |
| 1.3.6.1.4.1.9.9.318 | ciscoXgcpMIB | 3 | 120 | This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) … |
| 1.3.6.1.4.1.9.9.319 | ciscoPropAtmIfMIB | 3 | 57 | This MIB is designed for Propietary ATM (propAtm) interfaces. The propAtm interfaces are identified in the ifTable entries with if… |
| 1.3.6.1.4.1.9.9.321 | ciscoMgcMIB | 3 | 43 | This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a s… |
| 1.3.6.1.4.1.9.9.322 | ccacSysMIB | 2 | 60 | This MIB module provides provisioning and monitoring Call Admission Control (CAC). |
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | 3 | 87 | This MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. COD… |
| 1.3.6.1.4.1.9.9.324 | ciscoMediaGatewayMIB | 3 | 107 | The MIB module for managing Trunk Media Gateway. A Media Gateway is a network element that provides conversion between the audio … |
| 1.3.6.1.4.1.9.9.325 | ciscoXgcpExtMIB | 2 | 65 | This MIB module is an extension to CISCO-XGCP-MIB. It defines the parameters related to the following aspects in xGCP protocols: *… |
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | 3 | 57 | This MIB defines the configuration and monitoring capabilities relating to local IP pools. Local IP pools have the following char… |
| ... | ||||