Reference record for OID 1.3.6.1.4.1.9.9.42.1.2.15.1.14



parent
1.3.6.1.4.1.9.9.42.1.2.15.1 (rttMplsVpnMonCtrlEntry)
node code
14
node name
rttMplsVpnMonCtrlStatus
dot oid
1.3.6.1.4.1.9.9.42.1.2.15.1.14
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoRttMonMIB(42) ciscoRttMonObjects(1) rttMonCtrl(2) rttMplsVpnMonCtrlTable(15) rttMplsVpnMonCtrlEntry(1) rttMplsVpnMonCtrlStatus(14)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoRttMonMIB/ciscoRttMonObjects/rttMonCtrl/rttMplsVpnMonCtrlTable/rttMplsVpnMonCtrlEntry/rttMplsVpnMonCtrlStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/42/1/2/15/1/14

    Description by circitor

    The status of the conceptual Auto SAA L3 MPLS VPN control row.

    In order for this object to become active
    rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
    rttMplsVpnMonSchedulePeriod objects must be defined.
    All other objects can assume default values.

    If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
    rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
    to be set along with rttMplsVpnMonCtrlStatus.

    If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
    and rttMplsVpnMonCtrlVrfName needs to be set along with
    rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
    specified before setting rttMplsVpnMonCtrlStatus to 'active'.

    The following objects cannot be modified after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - rttMplsVpnMonCtrlRttType
    - rttMplsVpnMonCtrlVrfName

    The following objects can be modified even after creating the
    Auto SAA L3 MPLS VPN conceptual row by setting this object to
    'notInService'

    - All other writable objects in rttMplsVpnMonCtrlTable except
    rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
    - Objects in the rttMplsVpnMonTypeTable.
    - Objects in the rttMplsVpnMonScheduleTable.

    The following objects can be modified as needed without setting
    this object to 'notInService' even after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - Objects in rttMplsVpnMonReactTable.

    This object can be set to 'destroy' from any value
    at any time. When this object is set to 'destroy' it will stop
    and destroy all the probes created by this Auto SAA L3 MPLS VPN
    before destroying Auto SAA L3 MPLS VPN control row.

    Parsed from file CISCO-RTTMON-MIB.mib
    Module: CISCO-RTTMON-MIB

    Description by cisco_v1

    The status of the conceptual Auto SAA L3 MPLS VPN control row.

    In order for this object to become active
    rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
    rttMplsVpnMonSchedulePeriod objects must be defined.
    All other objects can assume default values.

    If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
    rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
    to be set along with rttMplsVpnMonCtrlStatus.

    If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
    and rttMplsVpnMonCtrlVrfName needs to be set along with
    rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
    specified before setting rttMplsVpnMonCtrlStatus to 'active'.

    The following objects cannot be modified after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - rttMplsVpnMonCtrlRttType
    - rttMplsVpnMonCtrlVrfName

    The following objects can be modified even after creating the
    Auto SAA L3 MPLS VPN conceptual row by setting this object to
    'notInService'

    - All other writable objects in rttMplsVpnMonCtrlTable except
    rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
    - Objects in the rttMplsVpnMonTypeTable.
    - Objects in the rttMplsVpnMonScheduleTable.

    The following objects can be modified as needed without setting
    this object to 'notInService' even after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - Objects in rttMplsVpnMonReactTable.

    This object can be set to 'destroy' from any value
    at any time. When this object is set to 'destroy' it will stop
    and destroy all the probes created by this Auto SAA L3 MPLS VPN
    before destroying Auto SAA L3 MPLS VPN control row.

    Description by mibdepot

    The status of the conceptual Auto SAA L3 MPLS VPN control row.

    In order for this object to become active
    rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
    rttMplsVpnMonSchedulePeriod objects must be defined.
    All other objects can assume default values.

    If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
    rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
    to be set along with rttMplsVpnMonCtrlStatus.

    If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
    and rttMplsVpnMonCtrlVrfName needs to be set along with
    rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
    specified before setting rttMplsVpnMonCtrlStatus to 'active'.

    The following objects cannot be modified after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - rttMplsVpnMonCtrlRttType
    - rttMplsVpnMonCtrlVrfName

    The following objects can be modified even after creating the
    Auto SAA L3 MPLS VPN conceptual row by setting this object to
    'notInService'

    - All other writable objects in rttMplsVpnMonCtrlTable except
    rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
    - Objects in the rttMplsVpnMonTypeTable.
    - Objects in the rttMplsVpnMonScheduleTable.

    The following objects can be modified as needed without setting
    this object to 'notInService' even after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - Objects in rttMplsVpnMonReactTable.

    This object can be set to 'destroy' from any value
    at any time. When this object is set to 'destroy' it will stop
    and destroy all the probes created by this Auto SAA L3 MPLS VPN
    before destroying Auto SAA L3 MPLS VPN control row.

    Parsed from file cisco-rttmon.mib.txt
    Company: None
    Module: CISCO-RTTMON-MIB

    Description by cisco

    The status of the conceptual Auto SAA L3 MPLS VPN control row.

    In order for this object to become active
    rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
    rttMplsVpnMonSchedulePeriod objects must be defined.
    All other objects can assume default values.

    If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
    rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
    to be set along with rttMplsVpnMonCtrlStatus.

    If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
    and rttMplsVpnMonCtrlVrfName needs to be set along with
    rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
    specified before setting rttMplsVpnMonCtrlStatus to 'active'.

    The following objects cannot be modified after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - rttMplsVpnMonCtrlRttType
    - rttMplsVpnMonCtrlVrfName

    The following objects can be modified even after creating the
    Auto SAA L3 MPLS VPN conceptual row by setting this object to
    'notInService'

    - All other writable objects in rttMplsVpnMonCtrlTable except
    rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
    - Objects in the rttMplsVpnMonTypeTable.
    - Objects in the rttMplsVpnMonScheduleTable.

    The following objects can be modified as needed without setting
    this object to 'notInService' even after creating the
    Auto SAA L3 MPLS VPN conceptual row.

    - Objects in rttMplsVpnMonReactTable.

    This object can be set to 'destroy' from any value
    at any time. When this object is set to 'destroy' it will stop
    and destroy all the probes created by this Auto SAA L3 MPLS VPN
    before destroying Auto SAA L3 MPLS VPN control row.

    Information by circitor

    rttMplsVpnMonCtrlStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of the conceptual Auto SAA L3 MPLS VPN control row.

        In order for this object to become active
        rttMplsVpnMonCtrlRttType,  rttMplsVpnMonCtrlVrfName and 
        rttMplsVpnMonSchedulePeriod objects must be defined.
        All other objects can assume default values.

        If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
        rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
        to be set along with rttMplsVpnMonCtrlStatus.

        If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
        and rttMplsVpnMonCtrlVrfName needs to be set along with
        rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
        specified before setting rttMplsVpnMonCtrlStatus to 'active'.

        The following objects cannot be modified after creating the
        Auto SAA L3 MPLS VPN conceptual row.

         - rttMplsVpnMonCtrlRttType
         - rttMplsVpnMonCtrlVrfName

        The following objects can be modified even after creating the
        Auto SAA L3 MPLS VPN conceptual row by setting this object to
        'notInService'

         - All other writable objects in rttMplsVpnMonCtrlTable except
           rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
         - Objects in the rttMplsVpnMonTypeTable.
         - Objects in the rttMplsVpnMonScheduleTable.

        The following objects can be modified as needed without setting
        this object to 'notInService' even after creating the
        Auto SAA L3 MPLS VPN conceptual row.

         - Objects in rttMplsVpnMonReactTable.

        This object can be set to 'destroy' from any value
        at any time. When this object is set to 'destroy' it will stop
        and destroy all the probes created by this Auto SAA L3 MPLS VPN
        before destroying Auto SAA L3 MPLS VPN control row." 
    ::= { rttMplsVpnMonCtrlEntry 14 }

    Information by cisco_v1

    rttMplsVpnMonCtrlStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the conceptual Auto SAA L3 MPLS VPN control row.
        
        In order for this object to become active
        rttMplsVpnMonCtrlRttType,  rttMplsVpnMonCtrlVrfName and 
        rttMplsVpnMonSchedulePeriod objects must be defined.
        All other objects can assume default values.
        
        If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
        rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
        to be set along with rttMplsVpnMonCtrlStatus.
        
        If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
        and rttMplsVpnMonCtrlVrfName needs to be set along with
        rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
        specified before setting rttMplsVpnMonCtrlStatus to 'active'.
        
        The following objects cannot be modified after creating the
        Auto SAA L3 MPLS VPN conceptual row.
        
         - rttMplsVpnMonCtrlRttType
         - rttMplsVpnMonCtrlVrfName
        
        The following objects can be modified even after creating the
        Auto SAA L3 MPLS VPN conceptual row by setting this object to
        'notInService'
        
         - All other writable objects in rttMplsVpnMonCtrlTable except
           rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
         - Objects in the rttMplsVpnMonTypeTable.
         - Objects in the rttMplsVpnMonScheduleTable.
        
        The following objects can be modified as needed without setting
        this object to 'notInService' even after creating the
        Auto SAA L3 MPLS VPN conceptual row.
        
         - Objects in rttMplsVpnMonReactTable.
        
        This object can be set to 'destroy' from any value
        at any time. When this object is set to 'destroy' it will stop
        and destroy all the probes created by this Auto SAA L3 MPLS VPN
        before destroying Auto SAA L3 MPLS VPN control row."
    ::= { rttMplsVpnMonCtrlEntry 14 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-RTTMON-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    rttMplsVpnMonCtrlStatus OBJECT-TYPE
  SYNTAX      RowStatus
  MAX-ACCESS  read-create
  STATUS      current
  DESCRIPTION
       "The status of the conceptual Auto SAA L3 MPLS VPN control row.

       In order for this object to become active
       rttMplsVpnMonCtrlRttType,  rttMplsVpnMonCtrlVrfName and 
       rttMplsVpnMonSchedulePeriod objects must be defined.
       All other objects can assume default values.

       If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
       rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
       to be set along with rttMplsVpnMonCtrlStatus.

       If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
       and rttMplsVpnMonCtrlVrfName needs to be set along with
       rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
       specified before setting rttMplsVpnMonCtrlStatus to 'active'.

       The following objects cannot be modified after creating the
       Auto SAA L3 MPLS VPN conceptual row.

        - rttMplsVpnMonCtrlRttType
        - rttMplsVpnMonCtrlVrfName

       The following objects can be modified even after creating the
       Auto SAA L3 MPLS VPN conceptual row by setting this object to
       'notInService'

        - All other writable objects in rttMplsVpnMonCtrlTable except
          rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
        - Objects in the rttMplsVpnMonTypeTable.
        - Objects in the rttMplsVpnMonScheduleTable.

       The following objects can be modified as needed without setting
       this object to 'notInService' even after creating the
       Auto SAA L3 MPLS VPN conceptual row.

        - Objects in rttMplsVpnMonReactTable.

       This object can be set to 'destroy' from any value
       at any time. When this object is set to 'destroy' it will stop
       and destroy all the probes created by this Auto SAA L3 MPLS VPN
       before destroying Auto SAA L3 MPLS VPN control row."
  ::= { rttMplsVpnMonCtrlEntry 14 }

    Information by cisco

    rttMplsVpnMonCtrlStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The status of the conceptual Auto SAA L3 MPLS VPN control row.

        In order for this object to become active
        rttMplsVpnMonCtrlRttType,  rttMplsVpnMonCtrlVrfName and 
        rttMplsVpnMonSchedulePeriod objects must be defined.
        All other objects can assume default values.

        If the object is set to 'createAndGo' rttMplsVpnMonCtrlRttType,
        rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod needs
        to be set along with rttMplsVpnMonCtrlStatus.

        If the object is set to 'createAndWait' rttMplsVpnMonCtrlRttType
        and rttMplsVpnMonCtrlVrfName needs to be set along with
        rttMplsVpnMonCtrlStatus. rttMplsVpnMonSchedulePeriod needs to be
        specified before setting rttMplsVpnMonCtrlStatus to 'active'.

        The following objects cannot be modified after creating the
        Auto SAA L3 MPLS VPN conceptual row.

         - rttMplsVpnMonCtrlRttType
         - rttMplsVpnMonCtrlVrfName

        The following objects can be modified even after creating the
        Auto SAA L3 MPLS VPN conceptual row by setting this object to
        'notInService'

         - All other writable objects in rttMplsVpnMonCtrlTable except
           rttMplsVpnMonCtrlRttType and rttMplsVpnMonCtrlVrfName.
         - Objects in the rttMplsVpnMonTypeTable.
         - Objects in the rttMplsVpnMonScheduleTable.

        The following objects can be modified as needed without setting
        this object to 'notInService' even after creating the
        Auto SAA L3 MPLS VPN conceptual row.

         - Objects in rttMplsVpnMonReactTable.

        This object can be set to 'destroy' from any value
        at any time. When this object is set to 'destroy' it will stop
        and destroy all the probes created by this Auto SAA L3 MPLS VPN
        before destroying Auto SAA L3 MPLS VPN control row." 
    ::= { rttMplsVpnMonCtrlEntry 14 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (16)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.42.1.2.15.1.1 rttMplsVpnMonCtrlIndex 0 0 Uniquely identifies a row in the rttMplsVpnMonCtrlTable.

    This is a pseudo-random number selected by the management
    station when c…
    1.3.6.1.4.1.9.9.42.1.2.15.1.2 rttMplsVpnMonCtrlRttType 0 0 The type of RTT operation to be performed for Auto SAA L3
    MPLS VPN.

    This value must be set in the same PDU of
    rttMplsVpnMonCtrlSta…
    1.3.6.1.4.1.9.9.42.1.2.15.1.3 rttMplsVpnMonCtrlVrfName 0 0 This field is used to specify the VPN name for which
    the Auto SAA L3 MPLS VPN RTT operation will be used.

    This value must be set …
    1.3.6.1.4.1.9.9.42.1.2.15.1.4 rttMplsVpnMonCtrlTag 0 0 A string which is used by a managing application to
    identify the RTT target.

    This string will be configured as rttMonCtrlAdminTag…
    1.3.6.1.4.1.9.9.42.1.2.15.1.5 rttMplsVpnMonCtrlThreshold 0 0 This object defines an administrative threshold limit.

    This value will be configured as rttMonCtrlAdminThreshold for
    all the oper…
    1.3.6.1.4.1.9.9.42.1.2.15.1.6 rttMplsVpnMonCtrlTimeout 0 0 Specifies the duration to wait for a RTT operation configured
    automatically by the Auto SAA L3 MPLS VPN to complete.

    The value of…
    1.3.6.1.4.1.9.9.42.1.2.15.1.7 rttMplsVpnMonCtrlScanInterval 0 0 Specifies the frequency at which the automatic PE addition
    should take place if there is any for an Auto SAA L3 MPLS VPN.

    New RTT…
    1.3.6.1.4.1.9.9.42.1.2.15.1.8 rttMplsVpnMonCtrlDelScanFactor 0 0 Specifies the frequency at which the automatic PE deletion
    should take place.

    This object specifies the number of times of
    rttMonM…
    1.3.6.1.4.1.9.9.42.1.2.15.1.9 rttMplsVpnMonCtrlEXP 0 0 This object represents the EXP value that needs to be
    put as precedence bit of an IP header.
    1.3.6.1.4.1.9.9.42.1.2.15.1.10 rttMplsVpnMonCtrlRequestSize 0 0 This object represents the native payload size that needs to
    be put on the packet.

    This value will be configured as
    rttMonEchoAdmi…
    1.3.6.1.4.1.9.9.42.1.2.15.1.11 rttMplsVpnMonCtrlVerifyData 0 0 When set to true, the resulting data in each RTT operation
    created by the current Auto SAA L3 MPLS VPN is compared with
    the expec…
    1.3.6.1.4.1.9.9.42.1.2.15.1.12 rttMplsVpnMonCtrlStorageType 0 0 The storage type of this conceptual row. When set to
    'nonVolatile', this entry will be shown in 'show running'
    command and can be…
    1.3.6.1.4.1.9.9.42.1.2.15.1.13 rttMplsVpnMonCtrlProbeList 0 0 This object holds the list of probes ID's that are created by
    the Auto SAA L3 MPLS VPN.

    The probes will be specified in the follo…
    1.3.6.1.4.1.9.9.42.1.2.15.1.15 rttMplsVpnMonCtrlLpd 0 0 When set to true, this implies that LPD (LSP Path Discovery)
    is enabled for this row.

    The Auto SAA L3 MPLS VPN will find all the …
    1.3.6.1.4.1.9.9.42.1.2.15.1.16 rttMplsVpnMonCtrlLpdGrpList 0 0 This object holds the list of LPD Group IDs that are created
    for this Auto SAA L3 MPLS VPN row.

    This object will be applicable on…
    1.3.6.1.4.1.9.9.42.1.2.15.1.17 rttMplsVpnMonCtrlLpdCompTime 0 0 The completion time of the LSP Path Discovery for the entire
    set of PEs which are discovered for this Auto SAA.

    This object will …