When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and configure RTT operation with rttMonCtrlAdminRttType
value as 'lspGroup'. The 'lspGroup' probe will walk through
the list of set of information that uniquely identifies a path
and send the LSP echo requests across them. All these LSP echo
requests sent for 1st path, 2nd path etc. can be thought of as
'single probes' sent as a part of 'lspGroup'. These single
probes will of type 'rttMplsVpnMonCtrlRttType'.
'lspGroup' probe is a superset of individual probes that will
test multiple paths. For example Suppose there are 10 paths to
the target. One 'lspGroup' probe will be created which will
store all the information related to uniquely identify the 10
paths. When the 'lspGroup' probe will run it will sweep through
the set of information for 1st path, 2nd path, 3rd path and so
on till it has tested all the paths.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and configure RTT operation with rttMonCtrlAdminRttType
value as 'lspGroup'. The 'lspGroup' probe will walk through
the list of set of information that uniquely identifies a path
and send the LSP echo requests across them. All these LSP echo
requests sent for 1st path, 2nd path etc. can be thought of as
'single probes' sent as a part of 'lspGroup'. These single
probes will of type 'rttMplsVpnMonCtrlRttType'.
'lspGroup' probe is a superset of individual probes that will
test multiple paths. For example Suppose there are 10 paths to
the target. One 'lspGroup' probe will be created which will
store all the information related to uniquely identify the 10
paths. When the 'lspGroup' probe will run it will sweep through
the set of information for 1st path, 2nd path, 3rd path and so
on till it has tested all the paths.
When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and configure RTT operation with rttMonCtrlAdminRttType
value as 'lspGroup'. The 'lspGroup' probe will walk through
the list of set of information that uniquely identifies a path
and send the LSP echo requests across them. All these LSP echo
requests sent for 1st path, 2nd path etc. can be thought of as
'single probes' sent as a part of 'lspGroup'. These single
probes will of type 'rttMplsVpnMonCtrlRttType'.
'lspGroup' probe is a superset of individual probes that will
test multiple paths. For example Suppose there are 10 paths to
the target. One 'lspGroup' probe will be created which will
store all the information related to uniquely identify the 10
paths. When the 'lspGroup' probe will run it will sweep through
the set of information for 1st path, 2nd path, 3rd path and so
on till it has tested all the paths.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and configure RTT operation with rttMonCtrlAdminRttType
value as 'lspGroup'. The 'lspGroup' probe will walk through
the list of set of information that uniquely identifies a path
and send the LSP echo requests across them. All these LSP echo
requests sent for 1st path, 2nd path etc. can be thought of as
'single probes' sent as a part of 'lspGroup'. These single
probes will of type 'rttMplsVpnMonCtrlRttType'.
'lspGroup' probe is a superset of individual probes that will
test multiple paths. For example Suppose there are 10 paths to
the target. One 'lspGroup' probe will be created which will
store all the information related to uniquely identify the 10
paths. When the 'lspGroup' probe will run it will sweep through
the set of information for 1st path, 2nd path, 3rd path and so
on till it has tested all the paths.
rttMplsVpnMonCtrlLpd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminRttType value as 'lspGroup'. The 'lspGroup' probe will walk through the list of set of information that uniquely identifies a path and send the LSP echo requests across them. All these LSP echo requests sent for 1st path, 2nd path etc. can be thought of as 'single probes' sent as a part of 'lspGroup'. These single probes will of type 'rttMplsVpnMonCtrlRttType'. 'lspGroup' probe is a superset of individual probes that will test multiple paths. For example Suppose there are 10 paths to the target. One 'lspGroup' probe will be created which will store all the information related to uniquely identify the 10 paths. When the 'lspGroup' probe will run it will sweep through the set of information for 1st path, 2nd path, 3rd path and so on till it has tested all the paths." DEFVAL { false } ::= { rttMplsVpnMonCtrlEntry 15 }
rttMplsVpnMonCtrlLpd OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminRttType value as 'lspGroup'. The 'lspGroup' probe will walk through the list of set of information that uniquely identifies a path and send the LSP echo requests across them. All these LSP echo requests sent for 1st path, 2nd path etc. can be thought of as 'single probes' sent as a part of 'lspGroup'. These single probes will of type 'rttMplsVpnMonCtrlRttType'. 'lspGroup' probe is a superset of individual probes that will test multiple paths. For example Suppose there are 10 paths to the target. One 'lspGroup' probe will be created which will store all the information related to uniquely identify the 10 paths. When the 'lspGroup' probe will run it will sweep through the set of information for 1st path, 2nd path, 3rd path and so on till it has tested all the paths." DEFVAL { false } ::= { rttMplsVpnMonCtrlEntry 15 }
Vendor: Cisco
Module: CISCO-RTTMON-MIB
[Automatically extracted from oidview.com]
rttMplsVpnMonCtrlLpd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminRttType value as 'lspGroup'. The 'lspGroup' probe will walk through the list of set of information that uniquely identifies a path and send the LSP echo requests across them. All these LSP echo requests sent for 1st path, 2nd path etc. can be thought of as 'single probes' sent as a part of 'lspGroup'. These single probes will of type 'rttMplsVpnMonCtrlRttType'. 'lspGroup' probe is a superset of individual probes that will test multiple paths. For example Suppose there are 10 paths to the target. One 'lspGroup' probe will be created which will store all the information related to uniquely identify the 10 paths. When the 'lspGroup' probe will run it will sweep through the set of information for 1st path, 2nd path, 3rd path and so on till it has tested all the paths." DEFVAL { false } ::= { rttMplsVpnMonCtrlEntry 15 }
rttMplsVpnMonCtrlLpd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminRttType value as 'lspGroup'. The 'lspGroup' probe will walk through the list of set of information that uniquely identifies a path and send the LSP echo requests across them. All these LSP echo requests sent for 1st path, 2nd path etc. can be thought of as 'single probes' sent as a part of 'lspGroup'. These single probes will of type 'rttMplsVpnMonCtrlRttType'. 'lspGroup' probe is a superset of individual probes that will test multiple paths. For example Suppose there are 10 paths to the target. One 'lspGroup' probe will be created which will store all the information related to uniquely identify the 10 paths. When the 'lspGroup' probe will run it will sweep through the set of information for 1st path, 2nd path, 3rd path and so on till it has tested all the paths." DEFVAL { false } ::= { rttMplsVpnMonCtrlEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.15.1.1 | rttMplsVpnMonCtrlIndex | 0 | 0 | Uniquely identifies a row in the rttMplsVpnMonCtrlTable. This is a pseudo-random number selected by the management station when c… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.2 | rttMplsVpnMonCtrlRttType | 0 | 0 | The type of RTT operation to be performed for Auto SAA L3 MPLS VPN. This value must be set in the same PDU of rttMplsVpnMonCtrlSta… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.3 | rttMplsVpnMonCtrlVrfName | 0 | 0 | This field is used to specify the VPN name for which the Auto SAA L3 MPLS VPN RTT operation will be used. This value must be set … |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.4 | rttMplsVpnMonCtrlTag | 0 | 0 | A string which is used by a managing application to identify the RTT target. This string will be configured as rttMonCtrlAdminTag… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.5 | rttMplsVpnMonCtrlThreshold | 0 | 0 | This object defines an administrative threshold limit. This value will be configured as rttMonCtrlAdminThreshold for all the oper… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.6 | rttMplsVpnMonCtrlTimeout | 0 | 0 | Specifies the duration to wait for a RTT operation configured automatically by the Auto SAA L3 MPLS VPN to complete. The value of… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.7 | rttMplsVpnMonCtrlScanInterval | 0 | 0 | Specifies the frequency at which the automatic PE addition should take place if there is any for an Auto SAA L3 MPLS VPN. New RTT… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.8 | rttMplsVpnMonCtrlDelScanFactor | 0 | 0 | Specifies the frequency at which the automatic PE deletion should take place. This object specifies the number of times of rttMonM… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.9 | rttMplsVpnMonCtrlEXP | 0 | 0 | This object represents the EXP value that needs to be put as precedence bit of an IP header. |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.10 | rttMplsVpnMonCtrlRequestSize | 0 | 0 | This object represents the native payload size that needs to be put on the packet. This value will be configured as rttMonEchoAdmi… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.11 | rttMplsVpnMonCtrlVerifyData | 0 | 0 | When set to true, the resulting data in each RTT operation created by the current Auto SAA L3 MPLS VPN is compared with the expec… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.12 | rttMplsVpnMonCtrlStorageType | 0 | 0 | The storage type of this conceptual row. When set to 'nonVolatile', this entry will be shown in 'show running' command and can be… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.13 | rttMplsVpnMonCtrlProbeList | 0 | 0 | This object holds the list of probes ID's that are created by the Auto SAA L3 MPLS VPN. The probes will be specified in the follo… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.14 | rttMplsVpnMonCtrlStatus | 0 | 0 | The status of the conceptual Auto SAA L3 MPLS VPN control row. In order for this object to become active rttMplsVpnMonCtrlRttType… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.16 | rttMplsVpnMonCtrlLpdGrpList | 0 | 0 | This object holds the list of LPD Group IDs that are created for this Auto SAA L3 MPLS VPN row. This object will be applicable on… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.17 | rttMplsVpnMonCtrlLpdCompTime | 0 | 0 | The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will … |