The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
Parsed from file CISCO-RTTMON-MIB.mib
Module: CISCO-RTTMON-MIB
The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
Parsed from file cisco-rttmon.mib.txt
Company: None
Module: CISCO-RTTMON-MIB
The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
rttMplsVpnMonCtrlLpdCompTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row." ::= { rttMplsVpnMonCtrlEntry 17 }
rttMplsVpnMonCtrlLpdCompTime OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row." ::= { rttMplsVpnMonCtrlEntry 17 }
Vendor: Cisco
Module: CISCO-RTTMON-MIB
[Automatically extracted from oidview.com]
rttMplsVpnMonCtrlLpdCompTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row." ::= { rttMplsVpnMonCtrlEntry 17 }
rttMplsVpnMonCtrlLpdCompTime OBJECT-TYPE SYNTAX Integer32 (1..65535) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row." ::= { rttMplsVpnMonCtrlEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.2.15.1.1 | rttMplsVpnMonCtrlIndex | 0 | 0 | Uniquely identifies a row in the rttMplsVpnMonCtrlTable. This is a pseudo-random number selected by the management station when c… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.2 | rttMplsVpnMonCtrlRttType | 0 | 0 | The type of RTT operation to be performed for Auto SAA L3 MPLS VPN. This value must be set in the same PDU of rttMplsVpnMonCtrlSta… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.3 | rttMplsVpnMonCtrlVrfName | 0 | 0 | This field is used to specify the VPN name for which the Auto SAA L3 MPLS VPN RTT operation will be used. This value must be set … |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.4 | rttMplsVpnMonCtrlTag | 0 | 0 | A string which is used by a managing application to identify the RTT target. This string will be configured as rttMonCtrlAdminTag… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.5 | rttMplsVpnMonCtrlThreshold | 0 | 0 | This object defines an administrative threshold limit. This value will be configured as rttMonCtrlAdminThreshold for all the oper… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.6 | rttMplsVpnMonCtrlTimeout | 0 | 0 | Specifies the duration to wait for a RTT operation configured automatically by the Auto SAA L3 MPLS VPN to complete. The value of… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.7 | rttMplsVpnMonCtrlScanInterval | 0 | 0 | Specifies the frequency at which the automatic PE addition should take place if there is any for an Auto SAA L3 MPLS VPN. New RTT… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.8 | rttMplsVpnMonCtrlDelScanFactor | 0 | 0 | Specifies the frequency at which the automatic PE deletion should take place. This object specifies the number of times of rttMonM… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.9 | rttMplsVpnMonCtrlEXP | 0 | 0 | This object represents the EXP value that needs to be put as precedence bit of an IP header. |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.10 | rttMplsVpnMonCtrlRequestSize | 0 | 0 | This object represents the native payload size that needs to be put on the packet. This value will be configured as rttMonEchoAdmi… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.11 | rttMplsVpnMonCtrlVerifyData | 0 | 0 | When set to true, the resulting data in each RTT operation created by the current Auto SAA L3 MPLS VPN is compared with the expec… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.12 | rttMplsVpnMonCtrlStorageType | 0 | 0 | The storage type of this conceptual row. When set to 'nonVolatile', this entry will be shown in 'show running' command and can be… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.13 | rttMplsVpnMonCtrlProbeList | 0 | 0 | This object holds the list of probes ID's that are created by the Auto SAA L3 MPLS VPN. The probes will be specified in the follo… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.14 | rttMplsVpnMonCtrlStatus | 0 | 0 | The status of the conceptual Auto SAA L3 MPLS VPN control row. In order for this object to become active rttMplsVpnMonCtrlRttType… |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.15 | rttMplsVpnMonCtrlLpd | 0 | 0 | When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the … |
| 1.3.6.1.4.1.9.9.42.1.2.15.1.16 | rttMplsVpnMonCtrlLpdGrpList | 0 | 0 | This object holds the list of LPD Group IDs that are created for this Auto SAA L3 MPLS VPN row. This object will be applicable on… |