A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 2048 through 2055; the second
octet to VLANs 2056 through 2063; etc. The most significant
bit of each octet corresponds to the lowest value VlanIndex
in that octet.
If the bit corresponding to a VLAN is set to '1', then the
local system is permitted to prune that VLAN on this trunk
port; if the bit is set to '0', then the system must not
prune that VLAN on this trunk port.
The default value is zero length string.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
Parsed from file CISCO-VTP-MIB.mib
Module: CISCO-VTP-MIB
A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 2048 through 2055; the second
octet to VLANs 2056 through 2063; etc. The most significant
bit of each octet corresponds to the lowest value VlanIndex
in that octet.
If the bit corresponding to a VLAN is set to '1', then the
local system is permitted to prune that VLAN on this trunk
port; if the bit is set to '0', then the system must not
prune that VLAN on this trunk port.
The default value is zero length string.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
vtpVlansPruningEligible3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 2048 through 2055; the second
octet to VLANs 2056 through 2063; etc. The most significant
bit of each octet corresponds to the lowest value VlanIndex
in that octet.
If the bit corresponding to a VLAN is set to , then the
local system is permitted to prune that VLAN on this trunk
port; if the bit is set to
View at oid-info.com
A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to VLANs
with VlanIndex values of 2048 through 2055; the second octet to
VLANs 2056 through 2063; etc. The most significant bit of
each octet corresponds to the lowest value VlanIndex in that octet.
If the bit corresponding to a VLAN is set to '1', then the
local system is permitted to prune that VLAN on this trunk
port; if the bit is set to '0', then the system must not
prune that VLAN on this trunk port.
The default value is zero length string.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
Parsed from file cisco-vtp.mib.txt
Company: None
Module: CISCO-VTP-MIB
A string of octets containing one bit per VLAN for VLANS
with VlanIndex values of 2048 through 3071 in the management
domain on this trunk port. The first octet corresponds to
VLANs with VlanIndex values of 2048 through 2055; the second
octet to VLANs 2056 through 2063; etc. The most significant
bit of each octet corresponds to the lowest value VlanIndex
in that octet.
If the bit corresponding to a VLAN is set to '1', then the
local system is permitted to prune that VLAN on this trunk
port; if the bit is set to '0', then the system must not
prune that VLAN on this trunk port.
The default value is zero length string.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
vtpVlansPruningEligible3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is permitted to prune that VLAN on this trunk port; if the bit is set to '0', then the system must not prune that VLAN on this trunk port. The default value is zero length string. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 21 }
vtpVlansPruningEligible3k OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is permitted to prune that VLAN on this trunk port; if the bit is set to '0', then the system must not prune that VLAN on this trunk port. The default value is zero length string. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 21 }
Automatically extracted from a file named C-VTP
vtpVlansPruningEligible3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is permitted to prune that VLAN on this trunk port; if the bit is set to '0', then the system must not prune that VLAN on this trunk port. The default value is zero length string. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 21 }
vtpVlansPruningEligible3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is permitted to prune that VLAN on this trunk port; if the bit is set to '0', then the system must not prune that VLAN on this trunk port. The default value is zero length string. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.46.1.6.1.1.1 | vlanTrunkPortIfIndex | 0 | 0 | The value of ifIndex for the interface corresponding to this trunk port. |
1.3.6.1.4.1.9.9.46.1.6.1.1.2 | vlanTrunkPortManagementDomain | 0 | 0 | The value of managementDomainIndex for the management domain on this trunk port. Devices which support only one management domai… |
1.3.6.1.4.1.9.9.46.1.6.1.1.3 | vlanTrunkPortEncapsulationType | 0 | 0 | The type of VLAN encapsulation used on this trunk port. Whether writing to this object in order to modify the encapsulation is su… |
1.3.6.1.4.1.9.9.46.1.6.1.1.4 | vlanTrunkPortVlansEnabled | 0 | 0 | vlanTrunkPortVlansEnabled OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A str… |
1.3.6.1.4.1.9.9.46.1.6.1.1.5 | vlanTrunkPortNativeVlan | 0 | 0 | The VlanIndex of the VLAN which is represented by native frames on this trunk port. For trunk ports not supporting the sending a… |
1.3.6.1.4.1.9.9.46.1.6.1.1.6 | vlanTrunkPortRowStatus | 0 | 0 | The status of this row. In some circumstances, the creation of a row in this table is needed to enable the appropriate trunking/… |
1.3.6.1.4.1.9.9.46.1.6.1.1.7 | vlanTrunkPortInJoins | 0 | 0 | The number of VTP Join messages received on this trunk port. |
1.3.6.1.4.1.9.9.46.1.6.1.1.8 | vlanTrunkPortOutJoins | 0 | 0 | The number of VTP Join messages sent on this trunk port. |
1.3.6.1.4.1.9.9.46.1.6.1.1.9 | vlanTrunkPortOldAdverts | 0 | 0 | The number of VTP Advertisement messages which indicated the sender does not support VLAN-pruning received on this trunk port. |
1.3.6.1.4.1.9.9.46.1.6.1.1.10 | vlanTrunkPortVlansPruningEligible | 0 | 0 | vlanTrunkPortVlansPruningEligible OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-create STATUS current DESCRIPTIO… |
1.3.6.1.4.1.9.9.46.1.6.1.1.11 | vlanTrunkPortVlansXmitJoined | 0 | 0 | A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs… |
1.3.6.1.4.1.9.9.46.1.6.1.1.12 | vlanTrunkPortVlansRcvJoined | 0 | 0 | A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs… |
1.3.6.1.4.1.9.9.46.1.6.1.1.13 | vlanTrunkPortDynamicState | 0 | 0 | For devices that allows dynamic determination of whether a link between two switches should be a trunk or not, this object allows… |
1.3.6.1.4.1.9.9.46.1.6.1.1.14 | vlanTrunkPortDynamicStatus | 0 | 0 | Indicates whether the specified interface is either acting as a trunk or not. This is a result of the vlanTrunkPortDynamicState a… |
1.3.6.1.4.1.9.9.46.1.6.1.1.15 | vlanTrunkPortVtpEnabled | 0 | 0 | Some trunk interface modules allow VTP to be enabled/disabled seperately from that of the central device. In such a case this ob… |
1.3.6.1.4.1.9.9.46.1.6.1.1.16 | vlanTrunkPortEncapsulationOperType | 0 | 0 | The type of VLAN encapsulation in use on this trunk port. For intefaces with vlanTrunkPortDynamicStatus of notTrunking(2) the vla… |
1.3.6.1.4.1.9.9.46.1.6.1.1.17 | vlanTrunkPortVlansEnabled2k | 0 | 0 | vlanTrunkPortVlansEnabled2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
1.3.6.1.4.1.9.9.46.1.6.1.1.18 | vlanTrunkPortVlansEnabled3k | 0 | 0 | vlanTrunkPortVlansEnabled3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
1.3.6.1.4.1.9.9.46.1.6.1.1.19 | vlanTrunkPortVlansEnabled4k | 0 | 0 | vlanTrunkPortVlansEnabled4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
1.3.6.1.4.1.9.9.46.1.6.1.1.20 | vtpVlansPruningEligible2k | 0 | 0 | vtpVlansPruningEligible2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A … |
1.3.6.1.4.1.9.9.46.1.6.1.1.22 | vtpVlansPruningEligible4k | 0 | 0 | vtpVlansPruningEligible4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A … |
1.3.6.1.4.1.9.9.46.1.6.1.1.23 | vlanTrunkPortVlansXmitJoined2k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.24 | vlanTrunkPortVlansXmitJoined3k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.25 | vlanTrunkPortVlansXmitJoined4k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.26 | vlanTrunkPortVlansRcvJoined2k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.27 | vlanTrunkPortVlansRcvJoined3k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.28 | vlanTrunkPortVlansRcvJoined4k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on t… |
1.3.6.1.4.1.9.9.46.1.6.1.1.29 | vlanTrunkPortDot1qTunnel | 0 | 0 | Indicates dot1qtunnel mode of the port. If the portDot1qTunnel is set to 'trunk' mode, the port's vlanTrunkPortDynamicState will… |
1.3.6.1.4.1.9.9.46.1.6.1.1.30 | vlanTrunkPortVlansActiveFirst2k | 0 | 0 | A string of octets containing one bit per VLAN with VlanIndex values of 0 through 2047. If the bit corresponding to a VLAN is set… |
1.3.6.1.4.1.9.9.46.1.6.1.1.31 | vlanTrunkPortVlansActiveSecond2k | 0 | 0 | A string of octets containing one bit per VLAN with VlanIndex values of 2048 through 4095. If the bit corresponding to a VLAN is … |