A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet. If the bit corresponding to
a VLAN is set to '1', then the local system is enabled for
sending and receiving frames on that VLAN; if the bit is set
to '0', then the system is disabled from sending and
receiving frames on that VLAN.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
Parsed from file CISCO-VTP-MIB.mib
Module: CISCO-VTP-MIB
A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet. If the bit corresponding to
a VLAN is set to '1', then the local system is enabled for
sending and receiving frames on that VLAN; if the bit is set
to '0', then the system is disabled from sending and
receiving frames on that VLAN.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
vlanTrunkPortVlansEnabled OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet. If the bit corresponding to
a VLAN is set to , then the local system is enabled for
sending and receiving frames on that VLAN; if the bit is set
to
View at oid-info.com
A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet. If the bit corresponding to
a VLAN is set to '1', then the local system is enabled for
sending and receiving frames on that VLAN; if the bit is set
to '0', then the system is disabled from sending and
receiving frames on that VLAN.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
Parsed from file cisco-vtp.mib.txt
Company: None
Module: CISCO-VTP-MIB
A string of octets containing one bit per VLAN in the
management domain on this trunk port. The first octet
corresponds to VLANs with VlanIndex values of 0 through 7;
the second octet to VLANs 8 through 15; etc. The most
significant bit of each octet corresponds to the lowest
value VlanIndex in that octet. If the bit corresponding to
a VLAN is set to '1', then the local system is enabled for
sending and receiving frames on that VLAN; if the bit is set
to '0', then the system is disabled from sending and
receiving frames on that VLAN.
To avoid conflicts between overlapping partial updates by
multiple managers, i.e., updates which modify only a portion
of an instance of this object (e.g., enable/disable a single
VLAN on the trunk port), any SNMP Set operation accessing an
instance of this object should also write the value of
vlanTrunkPortSetSerialNo.
vlanTrunkPortVlansEnabled OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is enabled for sending and receiving frames on that VLAN; if the bit is set to '0', then the system is disabled from sending and receiving frames on that VLAN. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 4 }
vlanTrunkPortVlansEnabled OBJECT-TYPE SYNTAX OCTET STRING(SIZE(128)) ACCESS read-write STATUS mandatory DESCRIPTION "A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is enabled for sending and receiving frames on that VLAN; if the bit is set to '0', then the system is disabled from sending and receiving frames on that VLAN. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 4 }
Automatically extracted from a file named C-VTP
vlanTrunkPortVlansEnabled OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is enabled for sending and receiving frames on that VLAN; if the bit is set to '0', then the system is disabled from sending and receiving frames on that VLAN. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 4 }
vlanTrunkPortVlansEnabled OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the local system is enabled for sending and receiving frames on that VLAN; if the bit is set to '0', then the system is disabled from sending and receiving frames on that VLAN. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo." ::= { vlanTrunkPortEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.46.1.6.1.1.1 | vlanTrunkPortIfIndex | 0 | 0 | The value of ifIndex for the interface corresponding to this trunk port. |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.2 | vlanTrunkPortManagementDomain | 0 | 0 | The value of managementDomainIndex for the management domain on this trunk port. Devices which support only one management domai… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.3 | vlanTrunkPortEncapsulationType | 0 | 0 | The type of VLAN encapsulation used on this trunk port. Whether writing to this object in order to modify the encapsulation is su… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.5 | vlanTrunkPortNativeVlan | 0 | 0 | The VlanIndex of the VLAN which is represented by native frames on this trunk port. For trunk ports not supporting the sending a… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.6 | vlanTrunkPortRowStatus | 0 | 0 | The status of this row. In some circumstances, the creation of a row in this table is needed to enable the appropriate trunking/… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.7 | vlanTrunkPortInJoins | 0 | 0 | The number of VTP Join messages received on this trunk port. |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.8 | vlanTrunkPortOutJoins | 0 | 0 | The number of VTP Join messages sent on this trunk port. |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.9 | vlanTrunkPortOldAdverts | 0 | 0 | The number of VTP Advertisement messages which indicated the sender does not support VLAN-pruning received on this trunk port. |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.10 | vlanTrunkPortVlansPruningEligible | 0 | 0 | vlanTrunkPortVlansPruningEligible OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-create STATUS current DESCRIPTIO… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.11 | vlanTrunkPortVlansXmitJoined | 0 | 0 | A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.12 | vlanTrunkPortVlansRcvJoined | 0 | 0 | A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.13 | vlanTrunkPortDynamicState | 0 | 0 | For devices that allows dynamic determination of whether a link between two switches should be a trunk or not, this object allows… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.14 | vlanTrunkPortDynamicStatus | 0 | 0 | Indicates whether the specified interface is either acting as a trunk or not. This is a result of the vlanTrunkPortDynamicState a… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.15 | vlanTrunkPortVtpEnabled | 0 | 0 | Some trunk interface modules allow VTP to be enabled/disabled seperately from that of the central device. In such a case this ob… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.16 | vlanTrunkPortEncapsulationOperType | 0 | 0 | The type of VLAN encapsulation in use on this trunk port. For intefaces with vlanTrunkPortDynamicStatus of notTrunking(2) the vla… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.17 | vlanTrunkPortVlansEnabled2k | 0 | 0 | vlanTrunkPortVlansEnabled2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.18 | vlanTrunkPortVlansEnabled3k | 0 | 0 | vlanTrunkPortVlansEnabled3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.19 | vlanTrunkPortVlansEnabled4k | 0 | 0 | vlanTrunkPortVlansEnabled4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.20 | vtpVlansPruningEligible2k | 0 | 0 | vtpVlansPruningEligible2k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A … |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.21 | vtpVlansPruningEligible3k | 0 | 0 | vtpVlansPruningEligible3k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A … |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.22 | vtpVlansPruningEligible4k | 0 | 0 | vtpVlansPruningEligible4k OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "A … |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.23 | vlanTrunkPortVlansXmitJoined2k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.24 | vlanTrunkPortVlansXmitJoined3k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.25 | vlanTrunkPortVlansXmitJoined4k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.26 | vlanTrunkPortVlansRcvJoined2k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.27 | vlanTrunkPortVlansRcvJoined3k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.28 | vlanTrunkPortVlansRcvJoined4k | 0 | 0 | A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on t… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.29 | vlanTrunkPortDot1qTunnel | 0 | 0 | Indicates dot1qtunnel mode of the port. If the portDot1qTunnel is set to 'trunk' mode, the port's vlanTrunkPortDynamicState will… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.30 | vlanTrunkPortVlansActiveFirst2k | 0 | 0 | A string of octets containing one bit per VLAN with VlanIndex values of 0 through 2047. If the bit corresponding to a VLAN is set… |
| 1.3.6.1.4.1.9.9.46.1.6.1.1.31 | vlanTrunkPortVlansActiveSecond2k | 0 | 0 | A string of octets containing one bit per VLAN with VlanIndex values of 2048 through 4095. If the bit corresponding to a VLAN is … |