The tables defined by this MIB module contain a collection
of managed objects that are general in nature and apply to
an edge device in an organizations network, e.g. a Metro
Ethernet network. An edge device, is a customer located
equipment, this is the first device which will connect the
Service Provider's network and map subscriber traffic into
the next layer. The access media could be either CAT5 or
fiber. The access device (edge device) can be designed for
DSL, Ethernet or other technologies, however, this MIB is
designed for Ethernet.
Terminology:
UNI - User to Network Interface
NNI - Network to Network Interface.
ENI - Enhanced Network Interface. Enhanced UNI port.
module/device
- In an environment (specifically, in an SNMP context)
consisting of a single chassis which can contain
multiple cards, the term 'module' refers to a card
and the term 'device' refers to the whole chassis.
In an environment where multiple chassis are 'stacked'
together, the term 'module' refers to a chassis and
the term 'device' refers to the whole stack.
In an environment containing only a single chassis
without removable cards, the terms 'device' and
'module' both refer to the chassis and its contents.
Parsed from file CISCO-ETHERNET-ACCESS-MIB.mib
Module: CISCO-ETHERNET-ACCESS-MIB
The tables defined by this MIB module contain a collection
of managed objects that are general in nature and apply to
an edge device in an organizations network, e.g. a Metro
Ethernet network. An edge device, is a customer located
equipment, this is the first device which will connect the
Service Provider's network and map subscriber traffic into
the next layer. The access media could be either CAT5 or
fiber. The access device (edge device) can be designed for
DSL, Ethernet or other technologies, however, this MIB is
designed for Ethernet.
Terminology:
UNI - User to Network Interface
NNI - Network to Network Interface.
ENI - Enhanced Network Interface. Enhanced UNI port.
module/device
- In an environment (specifically, in an SNMP context)
consisting of a single chassis which can contain
multiple cards, the term 'module' refers to a card
and the term 'device' refers to the whole chassis.
In an environment where multiple chassis are 'stacked'
together, the term 'module' refers to a chassis and
the term 'device' refers to the whole stack.
In an environment containing only a single chassis
without removable cards, the terms 'device' and
'module' both refer to the chassis and its contents.
Parsed from file CISCO-ETHERNET-ACCESS-MIB.my.txt
Company: None
Module: CISCO-ETHERNET-ACCESS-MIB
The tables defined by this MIB module contain a collection
of managed objects that are general in nature and apply to
an edge device in an organizations network, e.g. a Metro
Ethernet network. An edge device, is a customer located
equipment, this is the first device which will connect the
Service Provider's network and map subscriber traffic into
the next layer. The access media could be either CAT5 or
fiber. The access device (edge device) can be designed for
DSL, Ethernet or other technologies, however, this MIB is
designed for Ethernet.
Terminology:
UNI - User to Network Interface
NNI - Network to Network Interface.
ENI - Enhanced Network Interface. Enhanced UNI port.
module/device
- In an environment (specifically, in an SNMP context)
consisting of a single chassis which can contain
multiple cards, the term 'module' refers to a card
and the term 'device' refers to the whole chassis.
In an environment where multiple chassis are 'stacked'
together, the term 'module' refers to a chassis and
the term 'device' refers to the whole stack.
In an environment containing only a single chassis
without removable cards, the terms 'device' and
'module' both refer to the chassis and its contents.
ciscoEthernetAccessMIB MODULE-IDENTITY LAST-UPDATED "200709140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge device in an organizations network, e.g. a Metro Ethernet network. An edge device, is a customer located equipment, this is the first device which will connect the Service Provider's network and map subscriber traffic into the next layer. The access media could be either CAT5 or fiber. The access device (edge device) can be designed for DSL, Ethernet or other technologies, however, this MIB is designed for Ethernet. Terminology: UNI - User to Network Interface NNI - Network to Network Interface. ENI - Enhanced Network Interface. Enhanced UNI port. module/device - In an environment (specifically, in an SNMP context) consisting of a single chassis which can contain multiple cards, the term 'module' refers to a card and the term 'device' refers to the whole chassis. In an environment where multiple chassis are 'stacked' together, the term 'module' refers to a chassis and the term 'device' refers to the whole stack. In an environment containing only a single chassis without removable cards, the terms 'device' and 'module' both refer to the chassis and its contents." REVISION "200709140000Z" DESCRIPTION "Added ENI as a new port type to the ceaPortType and ceaPortCapability objects." REVISION "200501180000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 466 }
ciscoEthernetAccessMIB OBJECT IDENTIFIER ::= { ciscoMgmt 466 }
Vendor: Cisco
Module: CISCO-ETHERNET-ACCESS-MIB
[Automatically extracted from oidview.com]
ciscoEthernetAccessMIB MODULE-IDENTITY LAST-UPDATED "200709140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge device in an organizations network, e.g. a Metro Ethernet network. An edge device, is a customer located equipment, this is the first device which will connect the Service Provider's network and map subscriber traffic into the next layer. The access media could be either CAT5 or fiber. The access device (edge device) can be designed for DSL, Ethernet or other technologies, however, this MIB is designed for Ethernet. Terminology: UNI - User to Network Interface NNI - Network to Network Interface. ENI - Enhanced Network Interface. Enhanced UNI port. module/device - In an environment (specifically, in an SNMP context) consisting of a single chassis which can contain multiple cards, the term 'module' refers to a card and the term 'device' refers to the whole chassis. In an environment where multiple chassis are 'stacked' together, the term 'module' refers to a chassis and the term 'device' refers to the whole stack. In an environment containing only a single chassis without removable cards, the terms 'device' and 'module' both refer to the chassis and its contents." REVISION "200709140000Z" DESCRIPTION "Added ENI as a new port type to the ceaPortType and ceaPortCapability objects." REVISION "200501180000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 466 }
ciscoEthernetAccessMIB MODULE-IDENTITY LAST-UPDATED "200709140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge device in an organizations network, e.g. a Metro Ethernet network. An edge device, is a customer located equipment, this is the first device which will connect the Service Provider's network and map subscriber traffic into the next layer. The access media could be either CAT5 or fiber. The access device (edge device) can be designed for DSL, Ethernet or other technologies, however, this MIB is designed for Ethernet. Terminology: UNI - User to Network Interface NNI - Network to Network Interface. ENI - Enhanced Network Interface. Enhanced UNI port. module/device - In an environment (specifically, in an SNMP context) consisting of a single chassis which can contain multiple cards, the term 'module' refers to a card and the term 'device' refers to the whole chassis. In an environment where multiple chassis are 'stacked' together, the term 'module' refers to a chassis and the term 'device' refers to the whole stack. In an environment containing only a single chassis without removable cards, the terms 'device' and 'module' both refer to the chassis and its contents." REVISION "200709140000Z" DESCRIPTION "Added ENI as a new port type to the ceaPortType and ceaPortCapability objects." REVISION "200501180000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 466 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.466.1 | ciscoEthernetAccessMIBObjects | 2 | 13 | None |
1.3.6.1.4.1.9.9.466.2 | ciscoEthernetAccessMIBConform | 2 | 5 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.416 | ciscoDot11QosMIB | 3 | 49 | This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equ… |
1.3.6.1.4.1.9.9.420 | ciscoUnityExpressMIB | 3 | 179 | The MIB Module for the management of the Cisco Unity Express (CUE) service. CUE is a voicemail service that runs in a Cisco rout… |
1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | 3 | 55 | The MIB module for the management of the Dynamic Port Vsan Membership (DPVM) module. DPVM provides the ability to assign (virtual… |
1.3.6.1.4.1.9.9.422 | ciscoIPsecTc | 0 | 0 | This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RF… |
1.3.6.1.4.1.9.9.423 | ciscoIkeConfigMIB | 3 | 93 | This is a MIB Module for configuring and viewing IKE parameters and policies. Acronyms The following acronyms are used in this do… |
1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | 3 | 53 | This is the MIB module for Usage Based Metering for the DOCSIS-compliant Cable Modem Termination Systems (CMTS). Usage Based Mete… |
1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | 3 | 34 | The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monito… |
1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | 3 | 33 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
1.3.6.1.4.1.9.9.428 | ciscoIkeFlowExtMIB | 3 | 18 | This MIB module is an extension to CISCO-IKE-FLOW-MIB and contains Cisco Specific extensions for monitoring IKE. It is for monito… |
1.3.6.1.4.1.9.9.429 | ciscoIkeFlowMIB | 3 | 80 | This is a MIB module for monitoring the structures and status of IPsec control flows based on Internet Key Exchange protocol. The… |
1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
1.3.6.1.4.1.9.9.437 | ciscoPortTrackMIB | 2 | 18 | A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the o… |
1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
1.3.6.1.4.1.9.9.495 | ciscoPsdClientMIB | 3 | 44 | This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for conf… |
1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
1.3.6.1.4.1.9.9.500 | ciscoStackWiseMIB | 3 | 111 | This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technolo… |
1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
1.3.6.1.4.1.9.9.511 | ciscoCbpTargetTCMIB | 0 | 0 | This MIB module defines Textual Conventions for representing targets which have class based policy mappings. A target can be any … |
1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | 3 | 249 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weigh… |
1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | 4 | 386 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.514 | ciscoLwappTextualConventions | 0 | 0 | This module defines textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controlle… |
1.3.6.1.4.1.9.9.515 | ciscoLwappWebAuthMIB | 4 | 43 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
... |