The MIB module for Third Party Copy(TPC):
Third Party Copy derives its name from the fact
that there are three entities involved in the
process of copying data either for backup operations
or restore operations. The three entities:
- entity originating the copy commands
- data source for the copy
- data destination for the copy.
The entity originating the copy commands to perform
the data transfer can use the SCSI Extended Copy
(XCOPY).
The TPC feature exposes a disk target with
Logical Unit Number(LUN) 0 that is capable of
processing the SCSI Extended Copy Command (XCOPY)
to transfer data from a specified source to a
specified destination. On receiving the XCOPY
command, the TPC target performs the actual data
transfer from the data source to the data
destination on behalf of the entity issuing the
XCOPY command.
The MIB provides an interface to configure the
TPC targets. The user specifies the module and
the VSAN on which the TPC feature needs to be
configured. Once the feature has been configured
target ports are created on the specified module
and VSAN that are XCOPY capable. Any application
that can source a XCOPY command can use these
targets to perform data movement.
Acronyms
The following acronyms are used in this document:
XCOPY:
SCSI Extended Copy Command.
TPC:
Third Party Copy.
LUN:
Logical Unit Number.
VSAN:
Virtual Storage Area Network.
Parsed from file CISCO-TPC-MIB.mib
Module: CISCO-TPC-MIB
The MIB module for Third Party Copy(TPC):
Third Party Copy derives its name from the fact
that there are three entities involved in the
process of copying data either for backup operations
or restore operations. The three entities:
- entity originating the copy commands
- data source for the copy
- data destination for the copy.
The entity originating the copy commands to perform
the data transfer can use the SCSI Extended Copy
(XCOPY).
The TPC feature exposes a disk target with
Logical Unit Number(LUN) 0 that is capable of
processing the SCSI Extended Copy Command (XCOPY)
to transfer data from a specified source to a
specified destination. On receiving the XCOPY
command, the TPC target performs the actual data
transfer from the data source to the data
destination on behalf of the entity issuing the
XCOPY command.
The MIB provides an interface to configure the
TPC targets. The user specifies the module and
the VSAN on which the TPC feature needs to be
configured. Once the feature has been configured
target ports are created on the specified module
and VSAN that are XCOPY capable. Any application
that can source a XCOPY command can use these
targets to perform data movement.
Acronyms
The following acronyms are used in this document:
XCOPY:
SCSI Extended Copy Command.
TPC:
Third Party Copy.
LUN:
Logical Unit Number.
VSAN:
Virtual Storage Area Network.
Parsed from file CISCO-TPC-MIB.my.txt
Company: None
Module: CISCO-TPC-MIB
The MIB module for Third Party Copy(TPC):
Third Party Copy derives its name from the fact
that there are three entities involved in the
process of copying data either for backup operations
or restore operations. The three entities:
- entity originating the copy commands
- data source for the copy
- data destination for the copy.
The entity originating the copy commands to perform
the data transfer can use the SCSI Extended Copy
(XCOPY).
The TPC feature exposes a disk target with
Logical Unit Number(LUN) 0 that is capable of
processing the SCSI Extended Copy Command (XCOPY)
to transfer data from a specified source to a
specified destination. On receiving the XCOPY
command, the TPC target performs the actual data
transfer from the data source to the data
destination on behalf of the entity issuing the
XCOPY command.
The MIB provides an interface to configure the
TPC targets. The user specifies the module and
the VSAN on which the TPC feature needs to be
configured. Once the feature has been configured
target ports are created on the specified module
and VSAN that are XCOPY capable. Any application
that can source a XCOPY command can use these
targets to perform data movement.
Acronyms
The following acronyms are used in this document:
XCOPY:
SCSI Extended Copy Command.
TPC:
Third Party Copy.
LUN:
Logical Unit Number.
VSAN:
Virtual Storage Area Network.
ciscoTpcMIB MODULE-IDENTITY LAST-UPDATED "200501240000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved in the process of copying data either for backup operations or restore operations. The three entities: - entity originating the copy commands - data source for the copy - data destination for the copy. The entity originating the copy commands to perform the data transfer can use the SCSI Extended Copy (XCOPY). The TPC feature exposes a disk target with Logical Unit Number(LUN) 0 that is capable of processing the SCSI Extended Copy Command (XCOPY) to transfer data from a specified source to a specified destination. On receiving the XCOPY command, the TPC target performs the actual data transfer from the data source to the data destination on behalf of the entity issuing the XCOPY command. The MIB provides an interface to configure the TPC targets. The user specifies the module and the VSAN on which the TPC feature needs to be configured. Once the feature has been configured target ports are created on the specified module and VSAN that are XCOPY capable. Any application that can source a XCOPY command can use these targets to perform data movement. Acronyms The following acronyms are used in this document: XCOPY: SCSI Extended Copy Command. TPC: Third Party Copy. LUN: Logical Unit Number. VSAN: Virtual Storage Area Network. " REVISION "200501240000Z" DESCRIPTION "Initial version of this MIB module. " ::= { ciscoMgmt 460 }
ciscoTpcMIB OBJECT IDENTIFIER ::= { ciscoMgmt 460 }
Vendor: Cisco
Module: CISCO-TPC-MIB
[Automatically extracted from oidview.com]
ciscoTpcMIB MODULE-IDENTITY LAST-UPDATED "200501240000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved in the process of copying data either for backup operations or restore operations. The three entities: - entity originating the copy commands - data source for the copy - data destination for the copy. The entity originating the copy commands to perform the data transfer can use the SCSI Extended Copy (XCOPY). The TPC feature exposes a disk target with Logical Unit Number(LUN) 0 that is capable of processing the SCSI Extended Copy Command (XCOPY) to transfer data from a specified source to a specified destination. On receiving the XCOPY command, the TPC target performs the actual data transfer from the data source to the data destination on behalf of the entity issuing the XCOPY command. The MIB provides an interface to configure the TPC targets. The user specifies the module and the VSAN on which the TPC feature needs to be configured. Once the feature has been configured target ports are created on the specified module and VSAN that are XCOPY capable. Any application that can source a XCOPY command can use these targets to perform data movement. Acronyms The following acronyms are used in this document: XCOPY: SCSI Extended Copy Command. TPC: Third Party Copy. LUN: Logical Unit Number. VSAN: Virtual Storage Area Network. " REVISION "200501240000Z" DESCRIPTION "Initial version of this MIB module. " ::= { ciscoMgmt 460 }
ciscoTpcMIB MODULE-IDENTITY LAST-UPDATED "200501240000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved in the process of copying data either for backup operations or restore operations. The three entities: - entity originating the copy commands - data source for the copy - data destination for the copy. The entity originating the copy commands to perform the data transfer can use the SCSI Extended Copy (XCOPY). The TPC feature exposes a disk target with Logical Unit Number(LUN) 0 that is capable of processing the SCSI Extended Copy Command (XCOPY) to transfer data from a specified source to a specified destination. On receiving the XCOPY command, the TPC target performs the actual data transfer from the data source to the data destination on behalf of the entity issuing the XCOPY command. The MIB provides an interface to configure the TPC targets. The user specifies the module and the VSAN on which the TPC feature needs to be configured. Once the feature has been configured target ports are created on the specified module and VSAN that are XCOPY capable. Any application that can source a XCOPY command can use these targets to perform data movement. Acronyms The following acronyms are used in this document: XCOPY: SCSI Extended Copy Command. TPC: Third Party Copy. LUN: Logical Unit Number. VSAN: Virtual Storage Area Network. " REVISION "200501240000Z" DESCRIPTION "Initial version of this MIB module. " ::= { ciscoMgmt 460 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.460.0 | ciscoTpcNotification | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.460.1 | ciscoTpcObjects | 1 | 17 | None |
| 1.3.6.1.4.1.9.9.460.2 | ciscoTpcMIBConformance | 2 | 4 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.411 | ciscoVlanTranslationMIB | 3 | 27 | The MIB module for the management of VLAN translations. VLAN translation refers to the ability of the device to translate between… |
| 1.3.6.1.4.1.9.9.412 | ciscoSnmpTargetExtMIB | 2 | 30 | This MIB is an extension of the SNMP-TARGET-MIB specified in RFC3413. This MIB module contains Cisco-defined extension to the sn… |
| 1.3.6.1.4.1.9.9.413 | ciscoDot11SsidSecMIB | 2 | 71 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN devices association and authentication. ACR… |
| 1.3.6.1.4.1.9.9.414 | ciscoPoePdMIB | 3 | 17 | This MIB is intended for devices powered by external power sources, in particular Power Over Ethernet (PoE or formerly called inl… |
| 1.3.6.1.4.1.9.9.415 | ciscoWlanManMIB | 3 | 13 | This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. ACRONYMS HTTP Hypertext … |
| 1.3.6.1.4.1.9.9.416 | ciscoDot11QosMIB | 3 | 49 | This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equ… |
| 1.3.6.1.4.1.9.9.420 | ciscoUnityExpressMIB | 3 | 179 | The MIB Module for the management of the Cisco Unity Express (CUE) service. CUE is a voicemail service that runs in a Cisco rout… |
| 1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | 3 | 55 | The MIB module for the management of the Dynamic Port Vsan Membership (DPVM) module. DPVM provides the ability to assign (virtual… |
| 1.3.6.1.4.1.9.9.422 | ciscoIPsecTc | 0 | 0 | This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RF… |
| 1.3.6.1.4.1.9.9.423 | ciscoIkeConfigMIB | 3 | 93 | This is a MIB Module for configuring and viewing IKE parameters and policies. Acronyms The following acronyms are used in this do… |
| 1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | 3 | 53 | This is the MIB module for Usage Based Metering for the DOCSIS-compliant Cable Modem Termination Systems (CMTS). Usage Based Mete… |
| 1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | 3 | 34 | The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monito… |
| 1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | 3 | 33 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.428 | ciscoIkeFlowExtMIB | 3 | 18 | This MIB module is an extension to CISCO-IKE-FLOW-MIB and contains Cisco Specific extensions for monitoring IKE. It is for monito… |
| 1.3.6.1.4.1.9.9.429 | ciscoIkeFlowMIB | 3 | 80 | This is a MIB module for monitoring the structures and status of IPsec control flows based on Internet Key Exchange protocol. The… |
| 1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
| 1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
| 1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
| 1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
| 1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
| 1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
| 1.3.6.1.4.1.9.9.437 | ciscoPortTrackMIB | 2 | 18 | A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the o… |
| 1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
| 1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
| 1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
| 1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
| 1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
| 1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
| 1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
| 1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
| 1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
| 1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
| 1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
| 1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
| 1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
| 1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
| 1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
| 1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
| 1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
| 1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
| 1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
| 1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
| 1.3.6.1.4.1.9.9.495 | ciscoPsdClientMIB | 3 | 44 | This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for conf… |
| 1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
| 1.3.6.1.4.1.9.9.500 | ciscoStackWiseMIB | 3 | 111 | This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technolo… |
| 1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
| 1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
| 1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
| 1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
| 1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
| 1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
| ... | ||||