This MIB module manages the client side
functionality of the Persistent Storage Device(PSD).
This MIB instrumentation is for configuring
data-store(PSD client) feature on GGSN and monitoring
the state of the PSD server(up/down/full).
The Cisco Persistent Storage Device(PSD) is an
extension to existing storage on the Cisco Content
Services Gateway(CSG).
The GGSN currently allows sending of the CDRs to an
active CG, while allowing up to two standby CG's to
be configured. When all the configured CG's become
unavailable, the CDRs get stored at the GGSN and
start using up GGSN resources such as memory. As the
amount of memory is limited on GGSN and failure of
GGSN shall lead to losing these stored CDRs.
Using PSD as temporary storage, shall avoid losses
due to these problems. When all the configured CG's
are unavailable, GGSN needs to backup the live closed
CDR's to a PSD. When any of the CG's shall become
available, GGSN shall retrieve the stored CDR's
automatically from the PSD and forwards them to the
active CG.
PSD supports the charging protocol(GTP'), version 0
with a few private extensions, which is used to
facilitate the required functionality via UDP.
Acronyms and terms:
CDR Call Detail Record
CID Charging Identification
CG Charging Gateway
CGF Charging Gateway Functionality
DS Data-Store
ETSI European Telecommunications Standards
Institute
Ga Name of the interface between SGSN/GGSN and
CG
Gi Name of the interface between GGSN and PDN
Gn Name of the interface between GGSN and SGSN
G-CDR Gateway GPRS Support Node-Call Detail Record
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
GSM Global System for Mobile communication
GTP GPRS Tunneling Protocol
GTP' GTP enhanced for charging
IE Information Element
MS Mobile Station
PDN Packet Data Network
PDP Packet Data Protocol
SGSN Serving GPRS support Node
TOS Type of Service.
PSD Persistence Storage Device.
Parsed from file CISCO-PSD-CLIENT-MIB.mib
Module: CISCO-PSD-CLIENT-MIB
This MIB module manages the client side
functionality of the Persistent Storage Device(PSD).
This MIB instrumentation is for configuring
data-store(PSD client) feature on GGSN and monitoring
the state of the PSD server(up/down/full).
The Cisco Persistent Storage Device(PSD) is an
extension to existing storage on the Cisco Content
Services Gateway(CSG).
The GGSN currently allows sending of the CDRs to an
active CG, while allowing up to two standby CG's to
be configured. When all the configured CG's become
unavailable, the CDRs get stored at the GGSN and
start using up GGSN resources such as memory. As the
amount of memory is limited on GGSN and failure of
GGSN shall lead to losing these stored CDRs.
Using PSD as temporary storage, shall avoid losses
due to these problems. When all the configured CG's
are unavailable, GGSN needs to backup the live closed
CDR's to a PSD. When any of the CG's shall become
available, GGSN shall retrieve the stored CDR's
automatically from the PSD and forwards them to the
active CG.
PSD supports the charging protocol(GTP'), version 0
with a few private extensions, which is used to
facilitate the required functionality via UDP.
Acronyms and terms:
CDR Call Detail Record
CID Charging Identification
CG Charging Gateway
CGF Charging Gateway Functionality
DS Data-Store
ETSI European Telecommunications Standards
Institute
Ga Name of the interface between SGSN/GGSN and
CG
Gi Name of the interface between GGSN and PDN
Gn Name of the interface between GGSN and SGSN
G-CDR Gateway GPRS Support Node-Call Detail Record
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
GSM Global System for Mobile communication
GTP GPRS Tunneling Protocol
GTP' GTP enhanced for charging
IE Information Element
MS Mobile Station
PDN Packet Data Network
PDP Packet Data Protocol
SGSN Serving GPRS support Node
TOS Type of Service.
PSD Persistence Storage Device.
Parsed from file CISCO-PSD-CLIENT-MIB.my.txt
Company: None
Module: CISCO-PSD-CLIENT-MIB
This MIB module manages the client side
functionality of the Persistent Storage Device(PSD).
This MIB instrumentation is for configuring
data-store(PSD client) feature on GGSN and monitoring
the state of the PSD server(up/down/full).
The Cisco Persistent Storage Device(PSD) is an
extension to existing storage on the Cisco Content
Services Gateway(CSG).
The GGSN currently allows sending of the CDRs to an
active CG, while allowing up to two standby CG's to
be configured. When all the configured CG's become
unavailable, the CDRs get stored at the GGSN and
start using up GGSN resources such as memory. As the
amount of memory is limited on GGSN and failure of
GGSN shall lead to losing these stored CDRs.
Using PSD as temporary storage, shall avoid losses
due to these problems. When all the configured CG's
are unavailable, GGSN needs to backup the live closed
CDR's to a PSD. When any of the CG's shall become
available, GGSN shall retrieve the stored CDR's
automatically from the PSD and forwards them to the
active CG.
PSD supports the charging protocol(GTP'), version 0
with a few private extensions, which is used to
facilitate the required functionality via UDP.
Acronyms and terms:
CDR Call Detail Record
CID Charging Identification
CG Charging Gateway
CGF Charging Gateway Functionality
DS Data-Store
ETSI European Telecommunications Standards
Institute
Ga Name of the interface between SGSN/GGSN and
CG
Gi Name of the interface between GGSN and PDN
Gn Name of the interface between GGSN and SGSN
G-CDR Gateway GPRS Support Node-Call Detail Record
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
GSM Global System for Mobile communication
GTP GPRS Tunneling Protocol
GTP' GTP enhanced for charging
IE Information Element
MS Mobile Station
PDN Packet Data Network
PDP Packet Data Protocol
SGSN Serving GPRS support Node
TOS Type of Service.
PSD Persistence Storage Device.
ciscoPsdClientMIB MODULE-IDENTITY LAST-UPDATED "200508241800Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for configuring data-store(PSD client) feature on GGSN and monitoring the state of the PSD server(up/down/full). The Cisco Persistent Storage Device(PSD) is an extension to existing storage on the Cisco Content Services Gateway(CSG). The GGSN currently allows sending of the CDRs to an active CG, while allowing up to two standby CG's to be configured. When all the configured CG's become unavailable, the CDRs get stored at the GGSN and start using up GGSN resources such as memory. As the amount of memory is limited on GGSN and failure of GGSN shall lead to losing these stored CDRs. Using PSD as temporary storage, shall avoid losses due to these problems. When all the configured CG's are unavailable, GGSN needs to backup the live closed CDR's to a PSD. When any of the CG's shall become available, GGSN shall retrieve the stored CDR's automatically from the PSD and forwards them to the active CG. PSD supports the charging protocol(GTP'), version 0 with a few private extensions, which is used to facilitate the required functionality via UDP. Acronyms and terms: CDR Call Detail Record CID Charging Identification CG Charging Gateway CGF Charging Gateway Functionality DS Data-Store ETSI European Telecommunications Standards Institute Ga Name of the interface between SGSN/GGSN and CG Gi Name of the interface between GGSN and PDN Gn Name of the interface between GGSN and SGSN G-CDR Gateway GPRS Support Node-Call Detail Record GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GSM Global System for Mobile communication GTP GPRS Tunneling Protocol GTP' GTP enhanced for charging IE Information Element MS Mobile Station PDN Packet Data Network PDP Packet Data Protocol SGSN Serving GPRS support Node TOS Type of Service. PSD Persistence Storage Device." REVISION "200508241800Z" DESCRIPTION "Initial version of this MIB module." ::= {ciscoMgmt 495 }
ciscoPsdClientMIB OBJECT IDENTIFIER ::= { ciscoMgmt 495 }
Vendor: Cisco
Module: CISCO-PSD-CLIENT-MIB
[Automatically extracted from oidview.com]
ciscoPsdClientMIB MODULE-IDENTITY LAST-UPDATED "200508241800Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for configuring data-store(PSD client) feature on GGSN and monitoring the state of the PSD server(up/down/full). The Cisco Persistent Storage Device(PSD) is an extension to existing storage on the Cisco Content Services Gateway(CSG). The GGSN currently allows sending of the CDRs to an active CG, while allowing up to two standby CG's to be configured. When all the configured CG's become unavailable, the CDRs get stored at the GGSN and start using up GGSN resources such as memory. As the amount of memory is limited on GGSN and failure of GGSN shall lead to losing these stored CDRs. Using PSD as temporary storage, shall avoid losses due to these problems. When all the configured CG's are unavailable, GGSN needs to backup the live closed CDR's to a PSD. When any of the CG's shall become available, GGSN shall retrieve the stored CDR's automatically from the PSD and forwards them to the active CG. PSD supports the charging protocol(GTP'), version 0 with a few private extensions, which is used to facilitate the required functionality via UDP. Acronyms and terms: CDR Call Detail Record CID Charging Identification CG Charging Gateway CGF Charging Gateway Functionality DS Data-Store ETSI European Telecommunications Standards Institute Ga Name of the interface between SGSN/GGSN and CG Gi Name of the interface between GGSN and PDN Gn Name of the interface between GGSN and SGSN G-CDR Gateway GPRS Support Node-Call Detail Record GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GSM Global System for Mobile communication GTP GPRS Tunneling Protocol GTP' GTP enhanced for charging IE Information Element MS Mobile Station PDN Packet Data Network PDP Packet Data Protocol SGSN Serving GPRS support Node TOS Type of Service. PSD Persistence Storage Device." REVISION "200508241800Z" DESCRIPTION "Initial version of this MIB module." ::= {ciscoMgmt 495 }
ciscoPsdClientMIB MODULE-IDENTITY LAST-UPDATED "200508241800Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for configuring data-store(PSD client) feature on GGSN and monitoring the state of the PSD server(up/down/full). The Cisco Persistent Storage Device(PSD) is an extension to existing storage on the Cisco Content Services Gateway(CSG). The GGSN currently allows sending of the CDRs to an active CG, while allowing up to two standby CG's to be configured. When all the configured CG's become unavailable, the CDRs get stored at the GGSN and start using up GGSN resources such as memory. As the amount of memory is limited on GGSN and failure of GGSN shall lead to losing these stored CDRs. Using PSD as temporary storage, shall avoid losses due to these problems. When all the configured CG's are unavailable, GGSN needs to backup the live closed CDR's to a PSD. When any of the CG's shall become available, GGSN shall retrieve the stored CDR's automatically from the PSD and forwards them to the active CG. PSD supports the charging protocol(GTP'), version 0 with a few private extensions, which is used to facilitate the required functionality via UDP. Acronyms and terms: CDR Call Detail Record CID Charging Identification CG Charging Gateway CGF Charging Gateway Functionality DS Data-Store ETSI European Telecommunications Standards Institute Ga Name of the interface between SGSN/GGSN and CG Gi Name of the interface between GGSN and PDN Gn Name of the interface between GGSN and SGSN G-CDR Gateway GPRS Support Node-Call Detail Record GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GSM Global System for Mobile communication GTP GPRS Tunneling Protocol GTP' GTP enhanced for charging IE Information Element MS Mobile Station PDN Packet Data Network PDP Packet Data Protocol SGSN Serving GPRS support Node TOS Type of Service. PSD Persistence Storage Device." REVISION "200508241800Z" DESCRIPTION "Initial version of this MIB module." ::= {ciscoMgmt 495 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.495.0 | ciscoPsdClientMIBNotifs | 3 | 3 | None |
| 1.3.6.1.4.1.9.9.495.1 | ciscoPsdClientMIBObjects | 4 | 30 | None |
| 1.3.6.1.4.1.9.9.495.2 | ciscoPsdClientMIBConform | 2 | 8 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
| 1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
| 1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
| 1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
| 1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
| 1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
| 1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
| 1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
| 1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
| 1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
| 1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
| 1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
| 1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
| 1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
| 1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
| 1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
| 1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
| 1.3.6.1.4.1.9.9.500 | ciscoStackWiseMIB | 3 | 111 | This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technolo… |
| 1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
| 1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
| 1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
| 1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
| 1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
| 1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
| 1.3.6.1.4.1.9.9.511 | ciscoCbpTargetTCMIB | 0 | 0 | This MIB module defines Textual Conventions for representing targets which have class based policy mappings. A target can be any … |
| 1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | 3 | 249 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weigh… |
| 1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | 4 | 386 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.514 | ciscoLwappTextualConventions | 0 | 0 | This module defines textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controlle… |
| 1.3.6.1.4.1.9.9.515 | ciscoLwappWebAuthMIB | 4 | 43 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.517 | ciscoLwappReapMIB | 3 | 63 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | 4 | 64 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.519 | ciscoLwappIdsMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.520 | ciscoLwappCcxRmMIB | 3 | 45 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.521 | ciscoLwappWlanSecurityMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | 3 | 50 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | 3 | 61 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.524 | ciscoLwappQosMIB | 3 | 119 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.525 | ciscoLwappTsmMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.529 | ciscoItpMsuRatesMIB | 3 | 61 | This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher … |
| 1.3.6.1.4.1.9.9.530 | ciscoNacTcMIB | 0 | 0 | This module defines the textual conventions for Cisco Network Admission Control(NAC) system. The Cisco Network Admission Control … |
| 1.3.6.1.4.1.9.9.532 | ciscoNATExtMIB | 3 | 13 | This MIB is an extension to the NAT-MIB. This MIB module includes objects for providing the NAT related statistics. Acronyms: NAT… |
| 1.3.6.1.4.1.9.9.533 | ciscoCbpTargetMIB | 3 | 25 | This MIB module defines the managed objects for representing targets which have class-based policy mappings. A target can be any… |
| 1.3.6.1.4.1.9.9.543 | ciscoLicenseMgmtMIB | 3 | 131 | The MIB module for managing licenses on the system. The licensing mechanism provides flexibility to enforce licensing for various… |
| ... | ||||