The MIB module for managing resource classes
and configuring limits(max/min) to different
resources. The resource referenced in this MIB
are in addition to resource information availale
in other MIBs. This MIB is applicable to
L4-L7 modules which supports managing
resource limits using a centralized approach.
The resources (but not limited to) configured are
of following categories:
- TCP/IP Connections
- MAC Addresses
- syslog buffer, ACL Memmory
- NAT Translations etc
ciscoL4L7ResourceClassTable is used for adding/deleting
resource classes. Resource class is identified
by a name to which limits of multiple resources can
be configured.
ciscoL4L7ResourceLimitTable is used for adding/deleting
limits to resources in a resource class. This limit
is either maximum value and/or minimum value.
ciscoL4L7ResourceRateLimitTable is used for adding/deleting
rate limits to resources in a resource class.
Terminologies used:
ARP - Address Resolution Protocol.
ACL - Access Control List.
NAT - Network Address Translation.
NBAR - Network Based Application Recognition.
BPDU - Bridge Protocol Data Unit.
Parsed from file CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.mib
Module: CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB
The MIB module for managing resource classes
and configuring limits(max/min) to different
resources. The resource referenced in this MIB
are in addition to resource information availale
in other MIBs. This MIB is applicable to
L4-L7 modules which supports managing
resource limits using a centralized approach.
The resources (but not limited to) configured are
of following categories:
- TCP/IP Connections
- MAC Addresses
- syslog buffer, ACL Memmory
- NAT Translations etc
ciscoL4L7ResourceClassTable is used for adding/deleting
resource classes. Resource class is identified
by a name to which limits of multiple resources can
be configured.
ciscoL4L7ResourceLimitTable is used for adding/deleting
limits to resources in a resource class. This limit
is either maximum value and/or minimum value.
ciscoL4L7ResourceRateLimitTable is used for adding/deleting
rate limits to resources in a resource class.
Terminologies used:
ARP - Address Resolution Protocol.
ACL - Access Control List.
NAT - Network Address Translation.
NBAR - Network Based Application Recognition.
BPDU - Bridge Protocol Data Unit.
Parsed from file CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.my.txt
Company: None
Module: CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB
The MIB module for managing resource classes
and configuring limits(max/min) to different
resources. The resource referenced in this MIB
are in addition to resource information availale
in other MIBs. This MIB is applicable to
L4-L7 modules which supports managing
resource limits using a centralized approach.
The resources (but not limited to) configured are
of following categories:
- TCP/IP Connections
- MAC Addresses
- syslog buffer, ACL Memmory
- NAT Translations etc
ciscoL4L7ResourceClassTable is used for adding/deleting
resource classes. Resource class is identified
by a name to which limits of multiple resources can
be configured.
ciscoL4L7ResourceLimitTable is used for adding/deleting
limits to resources in a resource class. This limit
is either maximum value and/or minimal value.
ciscoL4L7ResourceRateLimitTable is used for adding/deleting
rate limits to resources in a resource class.
Terminologies used:
ARP - Address Resolution Protocol.
ACL - Access Control List.
NAT - Network Address Translation.
NBAR - Network Based Application Recognition.
BPDU - Bridge Protocol Data Unit.
ciscoL4L7moduleResourceLimitMIB MODULE-IDENTITY LAST-UPDATED "200803070000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in this MIB are in addition to resource information availale in other MIBs. This MIB is applicable to L4-L7 modules which supports managing resource limits using a centralized approach. The resources (but not limited to) configured are of following categories: - TCP/IP Connections - MAC Addresses - syslog buffer, ACL Memmory - NAT Translations etc ciscoL4L7ResourceClassTable is used for adding/deleting resource classes. Resource class is identified by a name to which limits of multiple resources can be configured. ciscoL4L7ResourceLimitTable is used for adding/deleting limits to resources in a resource class. This limit is either maximum value and/or minimum value. ciscoL4L7ResourceRateLimitTable is used for adding/deleting rate limits to resources in a resource class. Terminologies used: ARP - Address Resolution Protocol. ACL - Access Control List. NAT - Network Address Translation. NBAR - Network Based Application Recognition. BPDU - Bridge Protocol Data Unit." REVISION "200803070000Z" DESCRIPTION "- Added TEXTUAL-CONVENTION CiscoResourceType. - Added table ciscoL4L7ResourceUsageSummaryTable. - Added an OBJECT-GROUP ciscoL4L7ResourceUsageSummaryGroup. - Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev1. - Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev2." REVISION "200802070000Z" DESCRIPTION "- Added following enumerations in CiscoRateLimitResourceType sslConnections (9) mgmtBandwidth (10) throughput (11) missedMac (12) httpCompression (13) - Updated the description of bandwidth(4) enumeration in CiscoRateLimitResourceType." REVISION "200606190000Z" DESCRIPTION "- Added following enumerations in CiscoResourceLimitType hosts (15) ipsecSessions (16) asdmSessions (17) sshSessions (18) telnetSessions (19) - Added following objects in ciscoL4L7ResourceLimitTable crlResourceLimitCurrentUsage crlResourceLimitPeakUsage crlResourceLimitReqsDeniedCount - Added following objects in ciscoL4L7RateLimitTable crlRateLimitResourceCurrentUsage crlRateLimitResourcePeakUsage crlRateLimitResourceReqsDeniedCount - Added following objects: clrResourceLimitReachedNotifEnabled clrResourceRateLimitReachedNotifEnabled - Added following Notification objects clrResourceLimitReached clrResourceRateLimitReached - Added following in Compliance/Conformance ciscoL4L7ResourceLimitComplianceRev1." REVISION "200508050000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 480 }
ciscoL4L7moduleResourceLimitMIB OBJECT IDENTIFIER ::= { ciscoMgmt 480 }
Vendor: Cisco
Module: CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB
[Automatically extracted from oidview.com]
ciscoL4L7moduleResourceLimitMIB MODULE-IDENTITY LAST-UPDATED "200803070000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in this MIB are in addition to resource information availale in other MIBs. This MIB is applicable to L4-L7 modules which supports managing resource limits using a centralized approach. The resources (but not limited to) configured are of following categories: - TCP/IP Connections - MAC Addresses - syslog buffer, ACL Memmory - NAT Translations etc ciscoL4L7ResourceClassTable is used for adding/deleting resource classes. Resource class is identified by a name to which limits of multiple resources can be configured. ciscoL4L7ResourceLimitTable is used for adding/deleting limits to resources in a resource class. This limit is either maximum value and/or minimum value. ciscoL4L7ResourceRateLimitTable is used for adding/deleting rate limits to resources in a resource class. Terminologies used: ARP - Address Resolution Protocol. ACL - Access Control List. NAT - Network Address Translation. NBAR - Network Based Application Recognition. BPDU - Bridge Protocol Data Unit." REVISION "200803070000Z" DESCRIPTION "- Added TEXTUAL-CONVENTION CiscoResourceType. - Added table ciscoL4L7ResourceUsageSummaryTable. - Added an OBJECT-GROUP ciscoL4L7ResourceUsageSummaryGroup. - Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev1. - Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev2." REVISION "200802070000Z" DESCRIPTION "- Added following enumerations in CiscoRateLimitResourceType sslConnections (9) mgmtBandwidth (10) throughput (11) missedMac (12) httpCompression (13) - Updated the description of bandwidth(4) enumeration in CiscoRateLimitResourceType." REVISION "200606190000Z" DESCRIPTION "- Added following enumerations in CiscoResourceLimitType hosts (15) ipsecSessions (16) asdmSessions (17) sshSessions (18) telnetSessions (19) - Added following objects in ciscoL4L7ResourceLimitTable crlResourceLimitCurrentUsage crlResourceLimitPeakUsage crlResourceLimitReqsDeniedCount - Added following objects in ciscoL4L7RateLimitTable crlRateLimitResourceCurrentUsage crlRateLimitResourcePeakUsage crlRateLimitResourceReqsDeniedCount - Added following objects: clrResourceLimitReachedNotifEnabled clrResourceRateLimitReachedNotifEnabled - Added following Notification objects clrResourceLimitReached clrResourceRateLimitReached - Added following in Compliance/Conformance ciscoL4L7ResourceLimitComplianceRev1." REVISION "200508050000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 480 }
ciscoL4L7moduleResourceLimitMIB MODULE-IDENTITY LAST-UPDATED "201302200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in this MIB are in addition to resource information availale in other MIBs. This MIB is applicable to L4-L7 modules which supports managing resource limits using a centralized approach. The resources (but not limited to) configured are of following categories: - TCP/IP Connections - MAC Addresses - syslog buffer, ACL Memmory - NAT Translations etc ciscoL4L7ResourceClassTable is used for adding/deleting resource classes. Resource class is identified by a name to which limits of multiple resources can be configured. ciscoL4L7ResourceLimitTable is used for adding/deleting limits to resources in a resource class. This limit is either maximum value and/or minimal value. ciscoL4L7ResourceRateLimitTable is used for adding/deleting rate limits to resources in a resource class. Terminologies used: ARP - Address Resolution Protocol. ACL - Access Control List. NAT - Network Address Translation. NBAR - Network Based Application Recognition. BPDU - Bridge Protocol Data Unit." REVISION "201302200000Z" DESCRIPTION "Added the following two enum names to CiscoResourceLimitType TC: - cpu - memory Added the following groups: - ciscoL4L7ResourceNotifGroupRev2 - ciscoL4L7ResourceNotifOnlyObjectsGroupExt Deprecated ciscoL4L7ResourceNotifGroupRev1; Updated the DESCRIOTION of the following objects: - clrResourceRateLimitReachedNotifEnabled - clrResourceLimitReachedNotifEnabled" REVISION "201209200000Z" DESCRIPTION "Added the following groups - ciscoL4L7ResourceNotifGroupRev1 - ciscoL4L7ResourceNotifOnlyObjectsGroup Deprecated the following groups - ciscoL4L7ResourceNotifGroup Added the following compliance - ciscoL4L7ResourceLimitComplianceRev6" REVISION "201106100000Z" DESCRIPTION "-Added following OBJECT-TYPEs in table ciscoL4L7BufferUtilizationTable. crlExternalBufferUsageValue crlExternalPercentageBufferUsage crlExternalPercentageBufferUsageDisplay -Deprecated OBJECT-GROUP ciscoL4L7BufferUtilizationGroup. -Added OBJECT-GROUP ciscoL4L7BufferUtilizationGroupRev1. -Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev4. -Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev5." REVISION "201104150000Z" DESCRIPTION "- Added new table ciscoL4L7NpCpuUtilTable. - Added OBJECT-GROUP ciscoL4L7NpCpuUtilizationGroup. - Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev3. - Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev4." REVISION "201012060000Z" DESCRIPTION "- Added TEXTUAL-CONVENTION CiscoBufferUtilPercentage. - Added table ciscoL4L7BufferUtilizationTable. - Added an OBJECT-GROUP ciscoL4L7BufferUtilizationGroup. - Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev2. - Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev3." REVISION "200803070000Z" DESCRIPTION "- Added TEXTUAL-CONVENTION CiscoResourceType. - Added table ciscoL4L7ResourceUsageSummaryTable. - Added an OBJECT-GROUP ciscoL4L7ResourceUsageSummaryGroup. - Deprecated MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev1. - Added MODULE-COMPLIANCE ciscoL4L7ResourceLimitComplianceRev2." REVISION "200802070000Z" DESCRIPTION "- Added following enumerations in CiscoRateLimitResourceType sslConnections (9) mgmtBandwidth (10) throughput (11) missedMac (12) httpCompression (13) - Updated the description of bandwidth(4) enumeration in CiscoRateLimitResourceType." REVISION "200606190000Z" DESCRIPTION "- Added following enumerations in CiscoResourceLimitType hosts (15) ipsecSessions (16) asdmSessions (17) sshSessions (18) telnetSessions (19) - Added following objects in ciscoL4L7ResourceLimitTable crlResourceLimitCurrentUsage crlResourceLimitPeakUsage crlResourceLimitReqsDeniedCount - Added following objects in ciscoL4L7RateLimitTable crlRateLimitResourceCurrentUsage crlRateLimitResourcePeakUsage crlRateLimitResourceReqsDeniedCount - Added following objects: clrResourceLimitReachedNotifEnabled clrResourceRateLimitReachedNotifEnabled - Added following Notification objects clrResourceLimitReached clrResourceRateLimitReached - Added following in Compliance/Conformance ciscoL4L7ResourceLimitComplianceRev1." REVISION "200508050000Z" DESCRIPTION "Initial version of the MIB module." ::= { ciscoMgmt 480 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.480.0 | ciscoL4L7ResourceLimitNotifs | 6 | 6 | None |
1.3.6.1.4.1.9.9.480.1 | ciscoL4L7ResourceLimitMIBObjects | 3 | 65 | None |
1.3.6.1.4.1.9.9.480.2 | ciscoResourceLimitMIBConform | 0 | 0 | None |
1.3.6.1.4.1.9.9.480.3 | ciscoL4L7ResourceLimitConformance | 2 | 25 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
1.3.6.1.4.1.9.9.437 | ciscoPortTrackMIB | 2 | 18 | A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the o… |
1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
1.3.6.1.4.1.9.9.488 | ciscoFirewallTc | 0 | 0 | This MIB module defines textual conventions that are commonly used in modeling management information pertaining to configuration… |
1.3.6.1.4.1.9.9.490 | ciscoNetintMIB | 3 | 11 | This MIB module is for Network Interrupt information on Cisco device. |
1.3.6.1.4.1.9.9.491 | ciscoUnifiedFirewallMIB | 3 | 235 | Overview of Cisco Firewall MIB ============================== This MIB Module models status and performance statistics pertaining … |
1.3.6.1.4.1.9.9.492 | ciscoCefMIB | 3 | 192 | Cisco Express Forwarding (CEF) describes a high speed switching mechanism that a router uses to forward packets from the inbound … |
1.3.6.1.4.1.9.9.493 | ciscoCefTextualConventions | 0 | 0 | ciscoCeftextualConventions |
1.3.6.1.4.1.9.9.494 | ciscoEntityRedunTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Redundancy MIBs. |
1.3.6.1.4.1.9.9.495 | ciscoPsdClientMIB | 3 | 44 | This MIB module manages the client side functionality of the Persistent Storage Device(PSD). This MIB instrumentation is for conf… |
1.3.6.1.4.1.9.9.497 | cGgsnSAMIB | 3 | 247 | This MIB module manages the service-aware feature of Gateway GPRS Support Node (GGSN). This MIB is an enhancement of the CISCO-GG… |
1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | 3 | 93 | This management information module supports configuration, control and monitoring of redundancy protection for various kinds of c… |
1.3.6.1.4.1.9.9.500 | ciscoStackWiseMIB | 3 | 111 | This MIB module contain a collection of managed objects that apply to network devices supporting the Cisco StackWise(TM) technolo… |
1.3.6.1.4.1.9.9.504 | ciscoSwitchMulticastMIB | 3 | 108 | This MIB module defines management objects for the Multicast Switching features on Cisco Layer 2/3 devices. Definition of some of … |
1.3.6.1.4.1.9.9.505 | cpkiMIB | 3 | 44 | A networking device may provide several security services and protocols like SSL, SSH, IPSec/IKE etc. which need identities … |
1.3.6.1.4.1.9.9.507 | ciscoPolicyGroupMIB | 3 | 35 | The MIB module is for configuration of policy and policy group. A policy group can be described as a set of entities identified b… |
1.3.6.1.4.1.9.9.508 | ciscoSlbHealthMonMIB | 3 | 62 | An extension to the CISCO-SLB-EXT-MIB for SLB health monitoring probes. SLB: Server Load Balancing. Server load balancing provides… |
1.3.6.1.4.1.9.9.509 | ciscoWdsInfoMIB | 3 | 141 | This MIB is intended to be implemented on all Cisco network entities that provide Wireless Domain Services (WDS). The WDS provide… |
1.3.6.1.4.1.9.9.510 | ciscoErmMIB, ciscoVoiceLmrMIB | 3 | 176 | This MIB module provides management of voice tone signal as static injected tone for Land Mobile Radio The tone signal includes … |
1.3.6.1.4.1.9.9.511 | ciscoCbpTargetTCMIB | 0 | 0 | This MIB module defines Textual Conventions for representing targets which have class based policy mappings. A target can be any … |
1.3.6.1.4.1.9.9.512 | ciscoLwappWlanMIB | 3 | 249 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weigh… |
1.3.6.1.4.1.9.9.513 | ciscoLwappApMIB | 4 | 386 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.514 | ciscoLwappTextualConventions | 0 | 0 | This module defines textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controlle… |
1.3.6.1.4.1.9.9.515 | ciscoLwappWebAuthMIB | 4 | 43 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.516 | ciscoLwappLinkTestMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.517 | ciscoLwappReapMIB | 3 | 63 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | 4 | 64 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.519 | ciscoLwappIdsMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
1.3.6.1.4.1.9.9.520 | ciscoLwappCcxRmMIB | 3 | 45 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.521 | ciscoLwappWlanSecurityMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.522 | ciscoLwappDot11ClientCalibMIB | 3 | 50 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.523 | ciscoLwappClRoamMIB | 3 | 61 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.524 | ciscoLwappQosMIB | 3 | 119 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.525 | ciscoLwappTsmMIB | 3 | 57 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
1.3.6.1.4.1.9.9.529 | ciscoItpMsuRatesMIB | 3 | 61 | This MIB provides information used to manage the number of MTP3 MSUs transmitted and received per processor. Many of the higher … |
1.3.6.1.4.1.9.9.530 | ciscoNacTcMIB | 0 | 0 | This module defines the textual conventions for Cisco Network Admission Control(NAC) system. The Cisco Network Admission Control … |
... |