This object gives the number of contiguous 15 minute
intervals for which valid FEC PM data is available
for the particular interface.
The actual performance data is available in the following
Table
coiFECIntervalTable
The value of this object will be n (where n is the maximum
number of 15 minute intervals supported at this interface),
unless the measurement was (re-)started within the last
(nx15) minutes, in which case the value will be the
number of 15 minute intervals for which the agent
has some data.
This object reports a value 0, if FEC is disabled by setting
coiIfControllerFECMode to 'disable'.
Parsed from file CISCO-OTN-IF-MIB.mib
Module: CISCO-OTN-IF-MIB
This object gives the number of contiguous 15 minute
intervals for which valid FEC PM data is available
for the particular interface.
The actual performance data is available in the following
Table
coiFECIntervalTable
The value of this object will be n (where n is the maximum
number of 15 minute intervals supported at this interface),
unless the measurement was (re-)started within the last
(nx15) minutes, in which case the value will be the
number of 15 minute intervals for which the agent
has some data.
This object reports a value 0, if FEC is disabled by setting
coiIfControllerFECMode to 'disable'.
This object gives the number of contiguous 15 minute
intervals for which valid FEC PM data is available
for the particular interface.
The actual performance data is available in the following
Table
coiFECIntervalTable
The value of this object will be n (where n is the maximum
number of 15 minute intervals supported at this interface),
unless the measurement was (re-)started within the last
(nx15) minutes, in which case the value will be the
number of 15 minute intervals for which the agent
has some data.
This object reports a value 0, if FEC is disabled by setting
coiIfControllerFECMode to 'disable'.
Parsed from file CISCO-OTN-IF-MIB.my.txt
Company: None
Module: CISCO-OTN-IF-MIB
This object gives the number of contiguous 15 minute
intervals for which valid FEC PM data is available
for the particular interface.
The actual performance data is available in the following
Table
coiFECIntervalTable
The value of this object will be n (where n is the maximum
number of 15 minute intervals supported at this interface),
unless the measurement was (re-)started within the last
(nx15) minutes, in which case the value will be the
number of 15 minute intervals for which the agent
has some data.
This object reports a value 0, if FEC is disabled by setting
coiIfControllerFECMode to 'disable'.
coiIfControllerFECValidIntervals OBJECT-TYPE SYNTAX Unsigned32 (0..96 ) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The actual performance data is available in the following Table coiFECIntervalTable The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is disabled by setting coiIfControllerFECMode to 'disable'." ::= { coiIfControllerEntry 15 }
coiIfControllerFECValidIntervals OBJECT-TYPE SYNTAX Gauge(0..96) ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The actual performance data is available in the following Table coiFECIntervalTable The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is disabled by setting coiIfControllerFECMode to 'disable'." ::= { coiIfControllerEntry 15 }
Vendor: Cisco
Module: CISCO-OTN-IF-MIB
[Automatically extracted from oidview.com]
coiIfControllerFECValidIntervals OBJECT-TYPE SYNTAX Unsigned32 (0..96 ) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The actual performance data is available in the following Table coiFECIntervalTable The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is disabled by setting coiIfControllerFECMode to 'disable'." ::= { coiIfControllerEntry 15 }
coiIfControllerFECValidIntervals OBJECT-TYPE SYNTAX Unsigned32 (0..96) MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The actual performance data is available in the following Table coiFECIntervalTable The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is disabled by setting coiIfControllerFECMode to 'disable'." ::= { coiIfControllerEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.639.1.1.1.1.1 | coiIfControllerLoopback | 0 | 0 | This object is used to configure the loopback mode of the interface. valid values are - 'noLoop' - No Loopback present. 'ot… |
1.3.6.1.4.1.9.9.639.1.1.1.1.2 | coiIfControllerWavelength | 0 | 0 | This object is used to configure the wavelength of operation on applicable optical channel interfaces. |
1.3.6.1.4.1.9.9.639.1.1.1.1.3 | coiIfControllerLaserAdminStatus | 0 | 0 | This object is used to configure laser status on applicable interfaces. when it is set to down(2), it results in traffic drop and… |
1.3.6.1.4.1.9.9.639.1.1.1.1.4 | coiIfControllerLaserOperStatus | 0 | 0 | This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' -… |
1.3.6.1.4.1.9.9.639.1.1.1.1.5 | coiIfControllerOtnStatus | 0 | 0 | This object allows the management client to enable the OTN (ITU-T G.709) framing on applicable interfaces of ifType opticalChanne… |
1.3.6.1.4.1.9.9.639.1.1.1.1.6 | coiIfControllerFECMode | 0 | 0 | This object allows the management client to enable FEC ( Forward Error Correction ) on applicable interfaces. FEC is a technique … |
1.3.6.1.4.1.9.9.639.1.1.1.1.7 | coiIfControllerTDCOperMode | 0 | 0 | This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning … |
1.3.6.1.4.1.9.9.639.1.1.1.1.8 | coiIfControllerTDCOperStatus | 0 | 0 | This object gives the operational status of the Tuned Dispersion Compensator (TDC). The values may be - 'disabled' - TDC has bee… |
1.3.6.1.4.1.9.9.639.1.1.1.1.9 | coiIfControllerTDCOperSetting | 0 | 0 | This object gives the dispersion compensation setting that the TDC has been tuned to. It is expressed in pico-seconds per nanomet… |
1.3.6.1.4.1.9.9.639.1.1.1.1.10 | coiIfControllerPreFECBERMantissa | 0 | 0 | This object gives the mantissa part of the Pre FEC BER or correctable BER at any instance of time. It is represented in one hundr… |
1.3.6.1.4.1.9.9.639.1.1.1.1.11 | coiIfControllerPreFECBERExponent | 0 | 0 | This object gives the exponent part of the Pre FEC BER or correctable BER at any instance of time. It is represented in powers o… |
1.3.6.1.4.1.9.9.639.1.1.1.1.12 | coiIfControllerQFactor | 0 | 0 | This Object gives the value of Q-Factor represented in one hundredths of a dB. Q-Factor represents the analog signal to noise rat… |
1.3.6.1.4.1.9.9.639.1.1.1.1.13 | coiIfControllerQMargin | 0 | 0 | Q-Margin defines how much operational system margin that is available for a given circuit. Minimum margin should be defined by o… |
1.3.6.1.4.1.9.9.639.1.1.1.1.14 | coiIfControllerOTNValidIntervals | 0 | 0 | This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for t… |
1.3.6.1.4.1.9.9.639.1.1.1.1.16 | coiOtnIfOTUStatus | 0 | 0 | This object indicates the current defect status of the OTU layer on an OTN interface. noDefect(0): No defect. This bit will be… |
1.3.6.1.4.1.9.9.639.1.1.1.1.17 | coiOtnIfODUStatus | 0 | 0 | This object indicates the current defect status of the ODU layer on an OTN interface. noDefect(0): No Defect. This bit will be … |