This object indicates the current defect status of the OTU
layer on an OTN interface.
noDefect(0): No defect. This bit will be set when none of
the following defect bits are set.
los(1): LOS (Loss Of Signal). This bit will be set
when LOS defect is present.
lof(2): LOF (Loss Of Frame). This bit will be set
when LOF defect is present.
lom(3): LOM (Loss Of Multiframe). This bit will be
set when LOM defect is present.
bdi(4): BDI (Backward Defect Indication). This bit
will be set when BDI defect is present.
tim(5): TIM (Trace Identifier Mismatch). This bit
will be set when TIM defect is present.
ais(6): AIS (Alarm Indication Signal). This bit will
be set when AIS defect is present.
fecMismatch(7): FecMismatch (Forward Error Correction Mismatch
). This bit will be set when FECMISMATCH
defect is present.
This object indicates the current defect status of the OTU
layer on an OTN interface.
noDefect(0): No defect. This bit will be set when none of
the following defect bits are set.
los(1): LOS (Loss Of Signal). This bit will be set
when LOS defect is present.
lof(2): LOF (Loss Of Frame). This bit will be set
when LOF defect is present.
lom(3): LOM (Loss Of Multiframe). This bit will be
set when LOM defect is present.
bdi(4): BDI (Backward Defect Indication). This bit
will be set when BDI defect is present.
tim(5): TIM (Trace Identifier Mismatch). This bit
will be set when TIM defect is present.
ais(6): AIS (Alarm Indication Signal). This bit will
be set when AIS defect is present.
fecMismatch(7): FecMismatch (Forward Error Correction Mismatch
). This bit will be set when FECMISMATCH
defect is present.
coiOtnIfOTUStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..2)) ACCESS read-only STATUS mandatory DESCRIPTION "This object indicates the current defect status of the OTU layer on an OTN interface. noDefect(0): No defect. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS defect is present. lof(2): LOF (Loss Of Frame). This bit will be set when LOF defect is present. lom(3): LOM (Loss Of Multiframe). This bit will be set when LOM defect is present. bdi(4): BDI (Backward Defect Indication). This bit will be set when BDI defect is present. tim(5): TIM (Trace Identifier Mismatch). This bit will be set when TIM defect is present. ais(6): AIS (Alarm Indication Signal). This bit will be set when AIS defect is present. fecMismatch(7): FecMismatch (Forward Error Correction Mismatch ). This bit will be set when FECMISMATCH defect is present." ::= { coiIfControllerEntry 16 }
coiOtnIfOTUStatus OBJECT-TYPE SYNTAX BITS { noDefect(0), los(1), lof(2), lom(3), bdi(4), tim(5), ais(6), fecMismatch(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current defect status of the OTU layer on an OTN interface. noDefect(0): No defect. This bit will be set when none of the following defect bits are set. los(1): LOS (Loss Of Signal). This bit will be set when LOS defect is present. lof(2): LOF (Loss Of Frame). This bit will be set when LOF defect is present. lom(3): LOM (Loss Of Multiframe). This bit will be set when LOM defect is present. bdi(4): BDI (Backward Defect Indication). This bit will be set when BDI defect is present. tim(5): TIM (Trace Identifier Mismatch). This bit will be set when TIM defect is present. ais(6): AIS (Alarm Indication Signal). This bit will be set when AIS defect is present. fecMismatch(7): FecMismatch (Forward Error Correction Mismatch ). This bit will be set when FECMISMATCH defect is present." ::= { coiIfControllerEntry 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.639.1.1.1.1.1 | coiIfControllerLoopback | 0 | 0 | This object is used to configure the loopback mode of the interface. valid values are - 'noLoop' - No Loopback present. 'ot… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.2 | coiIfControllerWavelength | 0 | 0 | This object is used to configure the wavelength of operation on applicable optical channel interfaces. |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.3 | coiIfControllerLaserAdminStatus | 0 | 0 | This object is used to configure laser status on applicable interfaces. when it is set to down(2), it results in traffic drop and… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.4 | coiIfControllerLaserOperStatus | 0 | 0 | This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' -… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.5 | coiIfControllerOtnStatus | 0 | 0 | This object allows the management client to enable the OTN (ITU-T G.709) framing on applicable interfaces of ifType opticalChanne… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.6 | coiIfControllerFECMode | 0 | 0 | This object allows the management client to enable FEC ( Forward Error Correction ) on applicable interfaces. FEC is a technique … |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.7 | coiIfControllerTDCOperMode | 0 | 0 | This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning … |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.8 | coiIfControllerTDCOperStatus | 0 | 0 | This object gives the operational status of the Tuned Dispersion Compensator (TDC). The values may be - 'disabled' - TDC has bee… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.9 | coiIfControllerTDCOperSetting | 0 | 0 | This object gives the dispersion compensation setting that the TDC has been tuned to. It is expressed in pico-seconds per nanomet… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.10 | coiIfControllerPreFECBERMantissa | 0 | 0 | This object gives the mantissa part of the Pre FEC BER or correctable BER at any instance of time. It is represented in one hundr… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.11 | coiIfControllerPreFECBERExponent | 0 | 0 | This object gives the exponent part of the Pre FEC BER or correctable BER at any instance of time. It is represented in powers o… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.12 | coiIfControllerQFactor | 0 | 0 | This Object gives the value of Q-Factor represented in one hundredths of a dB. Q-Factor represents the analog signal to noise rat… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.13 | coiIfControllerQMargin | 0 | 0 | Q-Margin defines how much operational system margin that is available for a given circuit. Minimum margin should be defined by o… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.14 | coiIfControllerOTNValidIntervals | 0 | 0 | This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for t… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.15 | coiIfControllerFECValidIntervals | 0 | 0 | This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interf… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.17 | coiOtnIfODUStatus | 0 | 0 | This object indicates the current defect status of the ODU layer on an OTN interface. noDefect(0): No Defect. This bit will be … |