This object gives the operational mode of the Tuned
Dispersion Compensator (TDC).
The values may be -
'auto' - Automatic tuning of dispersion compensation.
'manual' - Manual tuning of dispersion compensation.
Parsed from file CISCO-OTN-IF-MIB.mib
Module: CISCO-OTN-IF-MIB
This object gives the operational mode of the Tuned
Dispersion Compensator (TDC).
The values may be -
'auto' - Automatic tuning of dispersion compensation.
'manual' - Manual tuning of dispersion compensation.
This object gives the operational mode of the Tuned
Dispersion Compensator (TDC).
The values may be -
'auto' - Automatic tuning of dispersion compensation.
'manual' - Manual tuning of dispersion compensation.
Parsed from file CISCO-OTN-IF-MIB.my.txt
Company: None
Module: CISCO-OTN-IF-MIB
This object gives the operational mode of the Tuned
Dispersion Compensator (TDC).
The values may be -
'auto' - Automatic tuning of dispersion compensation.
'manual' - Manual tuning of dispersion compensation.
coiIfControllerTDCOperMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning of dispersion compensation. 'manual' - Manual tuning of dispersion compensation." ::= { coiIfControllerEntry 7 }
coiIfControllerTDCOperMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning of dispersion compensation. 'manual' - Manual tuning of dispersion compensation." ::= { coiIfControllerEntry 7 }
Vendor: Cisco
Module: CISCO-OTN-IF-MIB
[Automatically extracted from oidview.com]
coiIfControllerTDCOperMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning of dispersion compensation. 'manual' - Manual tuning of dispersion compensation." ::= { coiIfControllerEntry 7 }
coiIfControllerTDCOperMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the operational mode of the Tuned Dispersion Compensator (TDC). The values may be - 'auto' - Automatic tuning of dispersion compensation. 'manual' - Manual tuning of dispersion compensation." ::= { coiIfControllerEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.639.1.1.1.1.1 | coiIfControllerLoopback | 0 | 0 | This object is used to configure the loopback mode of the interface. valid values are - 'noLoop' - No Loopback present. 'ot… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.2 | coiIfControllerWavelength | 0 | 0 | This object is used to configure the wavelength of operation on applicable optical channel interfaces. |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.3 | coiIfControllerLaserAdminStatus | 0 | 0 | This object is used to configure laser status on applicable interfaces. when it is set to down(2), it results in traffic drop and… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.4 | coiIfControllerLaserOperStatus | 0 | 0 | This object gives the current operational state of the Laser. Valid values are - 'up' - The laser is operational. 'down' -… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.5 | coiIfControllerOtnStatus | 0 | 0 | This object allows the management client to enable the OTN (ITU-T G.709) framing on applicable interfaces of ifType opticalChanne… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.6 | coiIfControllerFECMode | 0 | 0 | This object allows the management client to enable FEC ( Forward Error Correction ) on applicable interfaces. FEC is a technique … |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.8 | coiIfControllerTDCOperStatus | 0 | 0 | This object gives the operational status of the Tuned Dispersion Compensator (TDC). The values may be - 'disabled' - TDC has bee… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.9 | coiIfControllerTDCOperSetting | 0 | 0 | This object gives the dispersion compensation setting that the TDC has been tuned to. It is expressed in pico-seconds per nanomet… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.10 | coiIfControllerPreFECBERMantissa | 0 | 0 | This object gives the mantissa part of the Pre FEC BER or correctable BER at any instance of time. It is represented in one hundr… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.11 | coiIfControllerPreFECBERExponent | 0 | 0 | This object gives the exponent part of the Pre FEC BER or correctable BER at any instance of time. It is represented in powers o… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.12 | coiIfControllerQFactor | 0 | 0 | This Object gives the value of Q-Factor represented in one hundredths of a dB. Q-Factor represents the analog signal to noise rat… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.13 | coiIfControllerQMargin | 0 | 0 | Q-Margin defines how much operational system margin that is available for a given circuit. Minimum margin should be defined by o… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.14 | coiIfControllerOTNValidIntervals | 0 | 0 | This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for t… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.15 | coiIfControllerFECValidIntervals | 0 | 0 | This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interf… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.16 | coiOtnIfOTUStatus | 0 | 0 | This object indicates the current defect status of the OTU layer on an OTN interface. noDefect(0): No defect. This bit will be… |
| 1.3.6.1.4.1.9.9.639.1.1.1.1.17 | coiOtnIfODUStatus | 0 | 0 | This object indicates the current defect status of the ODU layer on an OTN interface. noDefect(0): No Defect. This bit will be … |