An entry containing threshold information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature
when a new interface is added to the ifTable.
An entry containing threshold information on optical layer
related attributes of interfaces with an ifType
opticalChannel(195). Entries are created by the feature
when a new interface is added to the ifTable.
coiOpticalThresholdEntry OBJECT-TYPE SYNTAX CoiOpticalThresholdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing threshold information on optical layer related attributes of interfaces with an ifType opticalChannel(195). Entries are created by the feature when a new interface is added to the ifTable." INDEX { ifIndex, coiOptThreshIntervalType } ::= { coiOpticalThresholdTable 1 }
coiOpticalThresholdEntry OBJECT-TYPE SYNTAX CoiOpticalThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing threshold information on optical layer related attributes of interfaces with an ifType opticalChannel(195). Entries are created by the feature when a new interface is added to the ifTable." INDEX { ifIndex, coiOptThreshIntervalType } ::= { coiOpticalThresholdTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.828.1.2.1.1.1 | coiOptThreshIntervalType | 0 | 0 | This object gives the interval type during which the performance statistics are accumulated for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.2 | coiOptThreshTXPowerMin | 0 | 0 | This object is used to configure the threshold of minimum Transmit power for the interface in 1/100 dBm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.3 | coiOptThreshRXPowerMin | 0 | 0 | This object is used to configure the threshold of minimum Receive power for the interface in 1/100 dBm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.4 | coiOptThreshOSNRMin | 0 | 0 | This object is used to configure the threshold of minimum Optical Signal to Noise Ratio for the interface in 1/100 dB. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.5 | coiOptThreshChromaticDispersionMin | 0 | 0 | This object is used to configure the threshold of minimum measure of spread of light pulse for the interface in ps/nm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.6 | coiOptThreshDifferentialGroupDelayMin | 0 | 0 | This object is used to configure the threshold of minimum propagation time difference between eigenmodes X and Y for the interfac… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.7 | coiOptThreshSecondOrderPMDMin | 0 | 0 | This object is used to configure the threshold of minimum Second Order Polarization Mode Dispersion for the interface in 1/100 ps… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.8 | coiOptThreshPolarizationDependentLossMin | 0 | 0 | This object is used to configure the threshold of minimum Polarization Dependent Loss for the interface in 1/100 dB. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.9 | coiOptThreshPolarizationChangeRateMin | 0 | 0 | This object is used to configure the threshold of minimum Polarization Change Rate for the interface in 1/100 rad/s. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.10 | coiOptThreshPhaseNoiseMin | 0 | 0 | This object is used to configure the threshold of minimum Fluctuations in the Phase of a Waveform for the interface in 1/1000 dB. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.11 | coiOptThreshLBCMin | 0 | 0 | This object is used to configure the threshold of minumum Laser Bias Current in 1/10%. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.12 | coiOptThreshTXPowerMax | 0 | 0 | This object is used to configure the threshold of maximum Transmit power for the interface in 1/100 dBm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.13 | coiOptThreshRXPowerMax | 0 | 0 | This object is used to configure the threshold of maximum Receive power for the interface in 1/100 dBm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.14 | coiOptThreshOSNRMax | 0 | 0 | This object is used to configure the threshold of maximum Optical Signal to Noise Ratio for the interface in 1/100 dB. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.15 | coiOptThreshChromaticDispersionMax | 0 | 0 | This object is used to configure the threshold of maximum measure of spread of light pulse for the interface in ps/nm. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.16 | coiOptThreshDifferentialGroupDelayMax | 0 | 0 | This object is used to configure the threshold of maximum propagation time difference between eigenmodes X and Y for the interfac… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.17 | coiOptThreshSecondOrderPMDMax | 0 | 0 | This object is used to configure the threshold of maximum Second Order Polarization Mode Dispersion for the interface in 1/100 ps… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.18 | coiOptThreshPolarizationDependentLossMax | 0 | 0 | This object is used to configure the threshold of maximum Polarization Dependent Loss for the interface in 1/100 dB. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.19 | coiOptThreshPolarizationChangeRateMax | 0 | 0 | This object is used to configure the threshold of maximum Polarization Change Rate in 1/100 rad/s for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.20 | coiOptThreshPhaseNoiseMax | 0 | 0 | This object is used to configure the threshold of maximum Fluctuations in the Phase of a Waveform in 1/1000 dB for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.21 | coiOptThreshLBCMax | 0 | 0 | This object is used to configure the threshold of maximum Laser Bias Current in 1/10 % for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.22 | coiOptThreshTXPowerEnableMin | 0 | 0 | This object is used to configure the enablement of threshold min Transmit power for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.23 | coiOptThreshRXPowerEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Receive power for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.24 | coiOptThreshOSNREnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Optical Signal to Noise Ratio for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.25 | coiOptThreshChromaticDispersionEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min measure of spread of light pulse for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.26 | coiOptThreshDifferentialGroupDelayEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min propagation time difference between eigenmodes X and Y for t… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.27 | coiOptThreshSecondOrderPMDEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Second Order Polarization Mode Dispersion for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.28 | coiOptThreshPolarizationDependentLossEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Polarization Dependent Loss for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.29 | coiOptThreshPolarizationChangeRateEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Polarization Change Rate for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.30 | coiOptThreshPhaseNoiseEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Fluctuations in the Phase of a Waveform for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.31 | coiOptThreshLBCEnableMin | 0 | 0 | This object is used to configure the enablement of the threshold min Laser Bias Current for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.32 | coiOptThreshTXPowerEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Transmit power for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.33 | coiOptThreshRXPowerEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Receive power for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.34 | coiOptThreshOSNREnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Optical Signal to Noise Ratio for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.35 | coiOptThreshChromaticDispersionEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max measure of spread of light pulse for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.36 | coiOptThreshDifferentialGroupDelayEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max propagation time difference between eigenmodes X and Y for t… |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.37 | coiOptThreshSecondOrderPMDEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Second Order Polarization Mode Dispersion for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.38 | coiOptThreshPolarizationDependentLossEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Polarization Dependent Loss for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.39 | coiOptThreshPolarizationChangeRateEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Polarization Change Rate for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.40 | coiOptThreshPhaseNoiseEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Fluctuations in the Phase of a Waveform for the interface. |
| 1.3.6.1.4.1.9.9.828.1.2.1.1.41 | coiOptThreshLBCEnableMax | 0 | 0 | This object is used to configure the enablement of the threshold max Laser Bias Current for the interface. |