Reference record for OID 1.3.6.1.4.1.9.9.828.1.2.1.1.38



parent
1.3.6.1.4.1.9.9.828.1.2.1.1 (coiOpticalThresholdEntry)
node code
38
node name
coiOptThreshPolarizationDependentLossEnableMax
dot oid
1.3.6.1.4.1.9.9.828.1.2.1.1.38
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshPolarizationDependentLossEnableMax(38)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshPolarizationDependentLossEnableMax

    • Description by cisco_v1

    This object is used to configure the enablement of the
    threshold max Polarization Dependent Loss for the interface.

    Description by cisco

    This object is used to configure the enablement of the
    threshold max Polarization Dependent Loss for the interface.

    Information by cisco_v1

    coiOptThreshPolarizationDependentLossEnableMax OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to configure the enablement of the
        threshold max Polarization Dependent Loss for the interface."
    ::= { coiOpticalThresholdEntry 38 }

    Information by cisco

    coiOptThreshPolarizationDependentLossEnableMax OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to configure the enablement of the
        threshold max Polarization Dependent Loss for the interface."
    ::= { coiOpticalThresholdEntry 38 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (40)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.828.1.2.1.1.1 coiOptThreshIntervalType 0 0 This object gives the interval type during which the
    performance statistics are accumulated for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.2 coiOptThreshTXPowerMin 0 0 This object is used to configure the threshold of minimum
    Transmit power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.3 coiOptThreshRXPowerMin 0 0 This object is used to configure the threshold of minimum
    Receive power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.4 coiOptThreshOSNRMin 0 0 This object is used to configure the threshold of minimum
    Optical Signal to Noise Ratio for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.5 coiOptThreshChromaticDispersionMin 0 0 This object is used to configure the threshold of minimum
    measure of spread of light pulse for the interface in ps/nm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.6 coiOptThreshDifferentialGroupDelayMin 0 0 This object is used to configure the threshold of minimum
    propagation time difference between eigenmodes X and Y for the
    interfac…
    1.3.6.1.4.1.9.9.828.1.2.1.1.7 coiOptThreshSecondOrderPMDMin 0 0 This object is used to configure the threshold of minimum
    Second Order Polarization Mode Dispersion for the interface in
    1/100 ps…
    1.3.6.1.4.1.9.9.828.1.2.1.1.8 coiOptThreshPolarizationDependentLossMin 0 0 This object is used to configure the threshold of minimum
    Polarization Dependent Loss for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.9 coiOptThreshPolarizationChangeRateMin 0 0 This object is used to configure the threshold of minimum
    Polarization Change Rate for the interface in 1/100 rad/s.
    1.3.6.1.4.1.9.9.828.1.2.1.1.10 coiOptThreshPhaseNoiseMin 0 0 This object is used to configure the threshold of minimum
    Fluctuations in the Phase of a Waveform for the interface in
    1/1000 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.11 coiOptThreshLBCMin 0 0 This object is used to configure the threshold of minumum
    Laser Bias Current in 1/10%.
    1.3.6.1.4.1.9.9.828.1.2.1.1.12 coiOptThreshTXPowerMax 0 0 This object is used to configure the threshold of maximum
    Transmit power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.13 coiOptThreshRXPowerMax 0 0 This object is used to configure the threshold of maximum
    Receive power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.14 coiOptThreshOSNRMax 0 0 This object is used to configure the threshold of maximum
    Optical Signal to Noise Ratio for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.15 coiOptThreshChromaticDispersionMax 0 0 This object is used to configure the threshold of maximum
    measure of spread of light pulse for the interface in ps/nm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.16 coiOptThreshDifferentialGroupDelayMax 0 0 This object is used to configure the threshold of maximum
    propagation time difference between eigenmodes X and Y for the
    interfac…
    1.3.6.1.4.1.9.9.828.1.2.1.1.17 coiOptThreshSecondOrderPMDMax 0 0 This object is used to configure the threshold of maximum
    Second Order Polarization Mode Dispersion for the interface in
    1/100 ps…
    1.3.6.1.4.1.9.9.828.1.2.1.1.18 coiOptThreshPolarizationDependentLossMax 0 0 This object is used to configure the threshold of maximum
    Polarization Dependent Loss for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.19 coiOptThreshPolarizationChangeRateMax 0 0 This object is used to configure the threshold of maximum
    Polarization Change Rate in 1/100 rad/s for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.20 coiOptThreshPhaseNoiseMax 0 0 This object is used to configure the threshold of maximum
    Fluctuations in the Phase of a Waveform in 1/1000 dB for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.21 coiOptThreshLBCMax 0 0 This object is used to configure the threshold of maximum
    Laser Bias Current in 1/10 % for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.22 coiOptThreshTXPowerEnableMin 0 0 This object is used to configure the enablement of threshold
    min Transmit power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.23 coiOptThreshRXPowerEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Receive power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.24 coiOptThreshOSNREnableMin 0 0 This object is used to configure the enablement of the
    threshold min Optical Signal to Noise Ratio for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.25 coiOptThreshChromaticDispersionEnableMin 0 0 This object is used to configure the enablement of the
    threshold min measure of spread of light pulse for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.26 coiOptThreshDifferentialGroupDelayEnableMin 0 0 This object is used to configure the enablement of the
    threshold min propagation time difference between eigenmodes X
    and Y for t…
    1.3.6.1.4.1.9.9.828.1.2.1.1.27 coiOptThreshSecondOrderPMDEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Second Order Polarization Mode Dispersion for
    the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.28 coiOptThreshPolarizationDependentLossEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Polarization Dependent Loss for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.29 coiOptThreshPolarizationChangeRateEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Polarization Change Rate for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.30 coiOptThreshPhaseNoiseEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Fluctuations in the Phase of a Waveform for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.31 coiOptThreshLBCEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Laser Bias Current for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.32 coiOptThreshTXPowerEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Transmit power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.33 coiOptThreshRXPowerEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Receive power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.34 coiOptThreshOSNREnableMax 0 0 This object is used to configure the enablement of the
    threshold max Optical Signal to Noise Ratio for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.35 coiOptThreshChromaticDispersionEnableMax 0 0 This object is used to configure the enablement of the
    threshold max measure of spread of light pulse for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.36 coiOptThreshDifferentialGroupDelayEnableMax 0 0 This object is used to configure the enablement of the
    threshold max propagation time difference between eigenmodes
    X and Y for t…
    1.3.6.1.4.1.9.9.828.1.2.1.1.37 coiOptThreshSecondOrderPMDEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Second Order Polarization Mode Dispersion for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.39 coiOptThreshPolarizationChangeRateEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Polarization Change Rate for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.40 coiOptThreshPhaseNoiseEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Fluctuations in the Phase of a Waveform for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.41 coiOptThreshLBCEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Laser Bias Current for the interface.