Reference record for OID 1.3.6.1.4.1.9.9.828.1.2.1.1.26



parent
1.3.6.1.4.1.9.9.828.1.2.1.1 (coiOpticalThresholdEntry)
node code
26
node name
coiOptThreshDifferentialGroupDelayEnableMin
dot oid
1.3.6.1.4.1.9.9.828.1.2.1.1.26
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoOpticalMIB(828) ciscoOpticalMIBObjects(1) coiOpticalPerformanceMonitoring(2) coiOpticalThresholdTable(1) coiOpticalThresholdEntry(1) coiOptThreshDifferentialGroupDelayEnableMin(26)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoOpticalMIB/ciscoOpticalMIBObjects/coiOpticalPerformanceMonitoring/coiOpticalThresholdTable/coiOpticalThresholdEntry/coiOptThreshDifferentialGroupDelayEnableMin

    • Description by cisco_v1

    This object is used to configure the enablement of the
    threshold min propagation time difference between eigenmodes X
    and Y for the interface.

    Description by cisco

    This object is used to configure the enablement of the
    threshold min propagation time difference between eigenmodes X
    and Y for the interface.

    Information by cisco_v1

    coiOptThreshDifferentialGroupDelayEnableMin OBJECT-TYPE
    SYNTAX TruthValue




    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to configure the enablement of the
        threshold min propagation time difference between eigenmodes X
        and Y for the interface."
    ::= { coiOpticalThresholdEntry 26 }

    Information by cisco

    coiOptThreshDifferentialGroupDelayEnableMin OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to configure the enablement of the
        threshold min propagation time difference between eigenmodes X
        and Y for the interface."
    ::= { coiOpticalThresholdEntry 26 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (40)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.828.1.2.1.1.1 coiOptThreshIntervalType 0 0 This object gives the interval type during which the
    performance statistics are accumulated for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.2 coiOptThreshTXPowerMin 0 0 This object is used to configure the threshold of minimum
    Transmit power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.3 coiOptThreshRXPowerMin 0 0 This object is used to configure the threshold of minimum
    Receive power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.4 coiOptThreshOSNRMin 0 0 This object is used to configure the threshold of minimum
    Optical Signal to Noise Ratio for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.5 coiOptThreshChromaticDispersionMin 0 0 This object is used to configure the threshold of minimum
    measure of spread of light pulse for the interface in ps/nm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.6 coiOptThreshDifferentialGroupDelayMin 0 0 This object is used to configure the threshold of minimum
    propagation time difference between eigenmodes X and Y for the
    interfac…
    1.3.6.1.4.1.9.9.828.1.2.1.1.7 coiOptThreshSecondOrderPMDMin 0 0 This object is used to configure the threshold of minimum
    Second Order Polarization Mode Dispersion for the interface in
    1/100 ps…
    1.3.6.1.4.1.9.9.828.1.2.1.1.8 coiOptThreshPolarizationDependentLossMin 0 0 This object is used to configure the threshold of minimum
    Polarization Dependent Loss for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.9 coiOptThreshPolarizationChangeRateMin 0 0 This object is used to configure the threshold of minimum
    Polarization Change Rate for the interface in 1/100 rad/s.
    1.3.6.1.4.1.9.9.828.1.2.1.1.10 coiOptThreshPhaseNoiseMin 0 0 This object is used to configure the threshold of minimum
    Fluctuations in the Phase of a Waveform for the interface in
    1/1000 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.11 coiOptThreshLBCMin 0 0 This object is used to configure the threshold of minumum
    Laser Bias Current in 1/10%.
    1.3.6.1.4.1.9.9.828.1.2.1.1.12 coiOptThreshTXPowerMax 0 0 This object is used to configure the threshold of maximum
    Transmit power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.13 coiOptThreshRXPowerMax 0 0 This object is used to configure the threshold of maximum
    Receive power for the interface in 1/100 dBm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.14 coiOptThreshOSNRMax 0 0 This object is used to configure the threshold of maximum
    Optical Signal to Noise Ratio for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.15 coiOptThreshChromaticDispersionMax 0 0 This object is used to configure the threshold of maximum
    measure of spread of light pulse for the interface in ps/nm.
    1.3.6.1.4.1.9.9.828.1.2.1.1.16 coiOptThreshDifferentialGroupDelayMax 0 0 This object is used to configure the threshold of maximum
    propagation time difference between eigenmodes X and Y for the
    interfac…
    1.3.6.1.4.1.9.9.828.1.2.1.1.17 coiOptThreshSecondOrderPMDMax 0 0 This object is used to configure the threshold of maximum
    Second Order Polarization Mode Dispersion for the interface in
    1/100 ps…
    1.3.6.1.4.1.9.9.828.1.2.1.1.18 coiOptThreshPolarizationDependentLossMax 0 0 This object is used to configure the threshold of maximum
    Polarization Dependent Loss for the interface in 1/100 dB.
    1.3.6.1.4.1.9.9.828.1.2.1.1.19 coiOptThreshPolarizationChangeRateMax 0 0 This object is used to configure the threshold of maximum
    Polarization Change Rate in 1/100 rad/s for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.20 coiOptThreshPhaseNoiseMax 0 0 This object is used to configure the threshold of maximum
    Fluctuations in the Phase of a Waveform in 1/1000 dB for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.21 coiOptThreshLBCMax 0 0 This object is used to configure the threshold of maximum
    Laser Bias Current in 1/10 % for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.22 coiOptThreshTXPowerEnableMin 0 0 This object is used to configure the enablement of threshold
    min Transmit power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.23 coiOptThreshRXPowerEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Receive power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.24 coiOptThreshOSNREnableMin 0 0 This object is used to configure the enablement of the
    threshold min Optical Signal to Noise Ratio for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.25 coiOptThreshChromaticDispersionEnableMin 0 0 This object is used to configure the enablement of the
    threshold min measure of spread of light pulse for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.27 coiOptThreshSecondOrderPMDEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Second Order Polarization Mode Dispersion for
    the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.28 coiOptThreshPolarizationDependentLossEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Polarization Dependent Loss for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.29 coiOptThreshPolarizationChangeRateEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Polarization Change Rate for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.30 coiOptThreshPhaseNoiseEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Fluctuations in the Phase of a Waveform for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.31 coiOptThreshLBCEnableMin 0 0 This object is used to configure the enablement of the
    threshold min Laser Bias Current for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.32 coiOptThreshTXPowerEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Transmit power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.33 coiOptThreshRXPowerEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Receive power for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.34 coiOptThreshOSNREnableMax 0 0 This object is used to configure the enablement of the
    threshold max Optical Signal to Noise Ratio for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.35 coiOptThreshChromaticDispersionEnableMax 0 0 This object is used to configure the enablement of the
    threshold max measure of spread of light pulse for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.36 coiOptThreshDifferentialGroupDelayEnableMax 0 0 This object is used to configure the enablement of the
    threshold max propagation time difference between eigenmodes
    X and Y for t…
    1.3.6.1.4.1.9.9.828.1.2.1.1.37 coiOptThreshSecondOrderPMDEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Second Order Polarization Mode Dispersion for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.38 coiOptThreshPolarizationDependentLossEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Polarization Dependent Loss for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.39 coiOptThreshPolarizationChangeRateEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Polarization Change Rate for the interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.40 coiOptThreshPhaseNoiseEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Fluctuations in the Phase of a Waveform for the
    interface.
    1.3.6.1.4.1.9.9.828.1.2.1.1.41 coiOptThreshLBCEnableMax 0 0 This object is used to configure the enablement of the
    threshold max Laser Bias Current for the interface.