Reference record for OID 1.3.6.1.4.1.9.9.86.1.4.1.1.11



parent
1.3.6.1.4.1.9.9.86.1.4.1.1 (cdspVoiceParamEntry)
node code
11
node name
cdspRtcpXrTransMultiplier
dot oid
1.3.6.1.4.1.9.9.86.1.4.1.1.11
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoDspMgmtMIB(86) cdspMgmtObjects(1) cdspVoiceObjects(4) cdspVoiceParamTable(1) cdspVoiceParamEntry(1) cdspRtcpXrTransMultiplier(11)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoDspMgmtMIB/cdspMgmtObjects/cdspVoiceObjects/cdspVoiceParamTable/cdspVoiceParamEntry/cdspRtcpXrTransMultiplier
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/86/1/4/1/1/11

    Description by circitor

    This object is used to configure the RTCPXR report
    frequency. i.e. how many RTCP packets during the interval
    of every RTCPXR packet.
    The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
    of RTCP packet.
    Example:
    If RTCP packet is sent every 10 ms(frequency of RTCP
    packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
    to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
    of RTCPXR packet = 30 ms).

    This object is applicable only if 'cdspRtcpXrControl' is
    set to 'true'.

    If object cdspVqmControl is set to 'xnq (3)', this
    object is read-only with the value of '1'.

    Parsed from file CISCO-DSP-MGMT-MIB.mib
    Module: CISCO-DSP-MGMT-MIB

    Description by cisco_v1

    This object is used to configure the RTCPXR report
    frequency. i.e. how many RTCP packets during the interval
    of every RTCPXR packet.
    The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
    of RTCP packet.
    Example:
    If RTCP packet is sent every 10 ms(frequency of RTCP
    packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
    to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
    of RTCPXR packet = 30 ms).

    This object is applicable only if 'cdspRtcpXrControl' is
    set to 'true'.

    If object cdspVqmControl is set to 'xnq (3)', this
    object is read-only with the value of '1'.

    Description by mibdepot

    This object is used to configure the RTCPXR report
    frequency. i.e. how many RTCP packets during the interval
    of every RTCPXR packet.
    The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
    of RTCP packet.
    Example:
    If RTCP packet is sent every 10 ms(frequency of RTCP
    packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
    to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
    of RTCPXR packet = 30 ms).

    This object is applicable only if 'cdspRtcpXrControl' is
    set to 'true'.

    If object cdspVqmControl is set to 'xnq (3)', this
    object is read-only with the value of '1'.

    Parsed from file CISCO-DSP-MGMT-MIB.my.txt
    Company: None
    Module: CISCO-DSP-MGMT-MIB

    Description by cisco

    This object is used to configure the RTCPXR report
    frequency. i.e. how many RTCP packets during the interval
    of every RTCPXR packet.
    The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
    of RTCP packet.
    Example:
    If RTCP packet is sent every 10 ms(frequency of RTCP
    packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
    to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
    of RTCPXR packet = 30 ms).

    This object is applicable only if 'cdspRtcpXrControl' is
    set to 'true'.

    If object cdspVqmControl is set to 'xnq (3)', this
    object is read-only with the value of '1'.

    Information by circitor

    cdspRtcpXrTransMultiplier OBJECT-TYPE
    SYNTAX          Unsigned32 (1..5)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to configure the RTCPXR report
        frequency. i.e. how many RTCP packets during the interval
        of every RTCPXR packet.
        The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
        of RTCP packet.
        Example:
           If RTCP packet is sent every 10 ms(frequency of RTCP
        packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
        to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
        of RTCPXR packet = 30 ms). 

        This object is applicable only if 'cdspRtcpXrControl' is
        set to 'true'.

        If object cdspVqmControl is set to 'xnq (3)', this
        object is read-only with the value of '1'."
    DEFVAL          { 1 } 
    ::= { cdspVoiceParamEntry 11 }

    Information by cisco_v1

    cdspRtcpXrTransMultiplier OBJECT-TYPE
    SYNTAX Gauge(1..5)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to configure the RTCPXR report
        frequency. i.e. how many RTCP packets during the interval
        of every RTCPXR packet.
        The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
        of RTCP packet.
        Example:
           If RTCP packet is sent every 10 ms(frequency of RTCP
        packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
        to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
        of RTCPXR packet = 30 ms). 
        
        This object is applicable only if 'cdspRtcpXrControl' is
        set to 'true'.
        
        If object cdspVqmControl is set to 'xnq (3)', this
        object is read-only with the value of '1'."
    DEFVAL { 1 }
    ::= { cdspVoiceParamEntry 11 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-DSP-MGMT-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    cdspRtcpXrTransMultiplier OBJECT-TYPE
    SYNTAX          Unsigned32 (1..5)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to configure the RTCPXR report
        frequency. i.e. how many RTCP packets during the interval
        of every RTCPXR packet.
        The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
        of RTCP packet.
        Example:
           If RTCP packet is sent every 10 ms(frequency of RTCP
        packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
        to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
        of RTCPXR packet = 30 ms). 

        This object is applicable only if 'cdspRtcpXrControl' is
        set to 'true'.

        If object cdspVqmControl is set to 'xnq (3)', this
        object is read-only with the value of '1'."
    DEFVAL          { 1 } 
    ::= { cdspVoiceParamEntry 11 }

    Information by cisco

    cdspRtcpXrTransMultiplier OBJECT-TYPE
    SYNTAX          Unsigned32 (1..5)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to configure the RTCPXR report
        frequency. i.e. how many RTCP packets during the interval
        of every RTCPXR packet.
        The RTCPXR report is sent every 'cdspRtcpXrTransMultiplier'
        of RTCP packet.
        Example:
           If RTCP packet is sent every 10 ms(frequency of RTCP
        packet = 10 ms), and 'cdspRtcpXrTransMultiplier' is set
        to 3, then RTCPXR is sent every 3x10 ms = 30 ms(frequency
        of RTCPXR packet = 30 ms). 

        This object is applicable only if 'cdspRtcpXrControl' is
        set to 'true'.

        If object cdspVqmControl is set to 'xnq (3)', this
        object is read-only with the value of '1'."
    DEFVAL          { 1 } 
    ::= { cdspVoiceParamEntry 11 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Brothers (16)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.86.1.4.1.1.1 cdspRtpSidPayloadType 0 0 This object specifies the RTP (Real Time Protocol) payload
    type of the SID (Silence Insertion Descriptor) packet
    that is sent to …
    1.3.6.1.4.1.9.9.86.1.4.1.1.2 cdspRtcpControl 0 0 This objects controls if RTCP (Real Time Control Protocol)
    will be enabled.
    If this object is set to 'true', both transmission an…
    1.3.6.1.4.1.9.9.86.1.4.1.1.3 cdspRtcpTransInterval 0 0 This attribute specifies the RTCP report interval (defined
    in RFC1889). It indicates the interval in which the RTCP
    reports shoul…
    1.3.6.1.4.1.9.9.86.1.4.1.1.4 cdspRtcpRecvMultiplier 0 0 This object specifies an approximate RTCP report interval
    (defined in RFC 1889) in milliseconds in which the RTCP
    reports should …
    1.3.6.1.4.1.9.9.86.1.4.1.1.5 cdspVadAdaptive 0 0 This attribute is used to enable or disable the Adaptive
    VAD knob of the VAD algorithm.
    Adaptive VAD works in conjunction with VA…
    1.3.6.1.4.1.9.9.86.1.4.1.1.6 cdspDtmfPowerLevel 0 0 This object specifies the power level of the low
    frequency component of DTMF. The power level of the high
    frequency component of …
    1.3.6.1.4.1.9.9.86.1.4.1.1.7 cdspDtmfPowerTwist 0 0 This object specifies the relative power level of the
    high frequency component of DTMF.
    The low frequency group is always fixed t…
    1.3.6.1.4.1.9.9.86.1.4.1.1.8 cdspRtcpTimerControl 0 0 This object specifies when the RTCP receive timer
    is started.

    disabled - timer is disabled
    startImmediately - ti…
    1.3.6.1.4.1.9.9.86.1.4.1.1.9 cdspVqmControl 0 0 This object is used to disable VQM or enable either
    RFC 3611 RTCPXR or Extended Network Quality Metrics VQM.

    disable - VQM is dis…
    1.3.6.1.4.1.9.9.86.1.4.1.1.10 cdspRtcpXrControl 0 0 This object controls if RTCPXR
    (Real Time Control Protocol Extended Report) is enabled.
    If this object is set to 'true', both tra…
    1.3.6.1.4.1.9.9.86.1.4.1.1.12 cdspRtcpXrGminDefault 0 0 This object is the default minimum gap value configured
    for the IP stream.

    This object is applicable only if 'cdspVqmControl' is
    s…
    1.3.6.1.4.1.9.9.86.1.4.1.1.13 cdspRtcpXrExtRfactor 0 0 This object is the external R factor metric value.
    The value 127 means it is not applicable.

    This object is applicable only if 'c…
    1.3.6.1.4.1.9.9.86.1.4.1.1.14 cdspPktLossConcealment 0 0 This object specifies the packet loss concealment:

    (1) none: No packet loss concealment applied
    (2) simple: Cisco Proprietary pac…
    1.3.6.1.4.1.9.9.86.1.4.1.1.15 cdspVqmThreshSES 0 0 This attribute specifies the threshold for
    Severely Errored Second on VQM. If the total
    number of milliseconds sampled as bad vo…
    1.3.6.1.4.1.9.9.86.1.4.1.1.16 cdspTransparentIpIp 0 0 This attribute is used to enable or disable the transparent
    mode when establishing a non-transcoding IP-IP connection.
    The attrib…
    1.3.6.1.4.1.9.9.86.1.4.1.1.17 cdspVoiceModeIpIp 0 0 This object specifies the voice mode for IP IP connections.
    normal : A normal Mode is a transcoding mode for IP-IP
    connection…