This objects controls if RTCP (Real Time Control Protocol)
will be enabled.
If this object is set to 'true', both transmission and
reception of RTCP packets are enabled; otherwise,
transmission of RTCP packets is disabled while any
received RTCP packets are ignored.
Parsed from file CISCO-DSP-MGMT-MIB.mib
Module: CISCO-DSP-MGMT-MIB
This objects controls if RTCP (Real Time Control Protocol)
will be enabled.
If this object is set to 'true', both transmission and
reception of RTCP packets are enabled; otherwise,
transmission of RTCP packets is disabled while any
received RTCP packets are ignored.
This objects controls if RTCP (Real Time Control Protocol)
will be enabled.
If this object is set to 'true', both transmission and
reception of RTCP packets are enabled; otherwise,
transmission of RTCP packets is disabled while any
received RTCP packets are ignored.
Parsed from file CISCO-DSP-MGMT-MIB.my.txt
Company: None
Module: CISCO-DSP-MGMT-MIB
This objects controls if RTCP (Real Time Control Protocol)
will be enabled.
If this object is set to 'true', both transmission and
reception of RTCP packets are enabled; otherwise,
transmission of RTCP packets is disabled while any
received RTCP packets are ignored.
cdspRtcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission and reception of RTCP packets are enabled; otherwise, transmission of RTCP packets is disabled while any received RTCP packets are ignored." REFERENCE "Appendix A.7 of RFC1889" DEFVAL { true } ::= { cdspVoiceParamEntry 2 }
cdspRtcpControl OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission and reception of RTCP packets are enabled; otherwise, transmission of RTCP packets is disabled while any received RTCP packets are ignored." REFERENCE "Appendix A.7 of RFC1889" DEFVAL { true } ::= { cdspVoiceParamEntry 2 }
Vendor: Cisco
Module: CISCO-DSP-MGMT-MIB
[Automatically extracted from oidview.com]
cdspRtcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission and reception of RTCP packets are enabled; otherwise, transmission of RTCP packets is disabled while any received RTCP packets are ignored." REFERENCE "Appendix A.7 of RFC1889" DEFVAL { true } ::= { cdspVoiceParamEntry 2 }
cdspRtcpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission and reception of RTCP packets are enabled; otherwise, transmission of RTCP packets is disabled while any received RTCP packets are ignored." REFERENCE "Appendix A.7 of RFC1889" DEFVAL { true } ::= { cdspVoiceParamEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.86.1.4.1.1.1 | cdspRtpSidPayloadType | 0 | 0 | This object specifies the RTP (Real Time Protocol) payload type of the SID (Silence Insertion Descriptor) packet that is sent to … |
1.3.6.1.4.1.9.9.86.1.4.1.1.3 | cdspRtcpTransInterval | 0 | 0 | This attribute specifies the RTCP report interval (defined in RFC1889). It indicates the interval in which the RTCP reports shoul… |
1.3.6.1.4.1.9.9.86.1.4.1.1.4 | cdspRtcpRecvMultiplier | 0 | 0 | This object specifies an approximate RTCP report interval (defined in RFC 1889) in milliseconds in which the RTCP reports should … |
1.3.6.1.4.1.9.9.86.1.4.1.1.5 | cdspVadAdaptive | 0 | 0 | This attribute is used to enable or disable the Adaptive VAD knob of the VAD algorithm. Adaptive VAD works in conjunction with VA… |
1.3.6.1.4.1.9.9.86.1.4.1.1.6 | cdspDtmfPowerLevel | 0 | 0 | This object specifies the power level of the low frequency component of DTMF. The power level of the high frequency component of … |
1.3.6.1.4.1.9.9.86.1.4.1.1.7 | cdspDtmfPowerTwist | 0 | 0 | This object specifies the relative power level of the high frequency component of DTMF. The low frequency group is always fixed t… |
1.3.6.1.4.1.9.9.86.1.4.1.1.8 | cdspRtcpTimerControl | 0 | 0 | This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - ti… |
1.3.6.1.4.1.9.9.86.1.4.1.1.9 | cdspVqmControl | 0 | 0 | This object is used to disable VQM or enable either RFC 3611 RTCPXR or Extended Network Quality Metrics VQM. disable - VQM is dis… |
1.3.6.1.4.1.9.9.86.1.4.1.1.10 | cdspRtcpXrControl | 0 | 0 | This object controls if RTCPXR (Real Time Control Protocol Extended Report) is enabled. If this object is set to 'true', both tra… |
1.3.6.1.4.1.9.9.86.1.4.1.1.11 | cdspRtcpXrTransMultiplier | 0 | 0 | This object is used to configure the RTCPXR report frequency. i.e. how many RTCP packets during the interval of every RTCPXR pack… |
1.3.6.1.4.1.9.9.86.1.4.1.1.12 | cdspRtcpXrGminDefault | 0 | 0 | This object is the default minimum gap value configured for the IP stream. This object is applicable only if 'cdspVqmControl' is s… |
1.3.6.1.4.1.9.9.86.1.4.1.1.13 | cdspRtcpXrExtRfactor | 0 | 0 | This object is the external R factor metric value. The value 127 means it is not applicable. This object is applicable only if 'c… |
1.3.6.1.4.1.9.9.86.1.4.1.1.14 | cdspPktLossConcealment | 0 | 0 | This object specifies the packet loss concealment: (1) none: No packet loss concealment applied (2) simple: Cisco Proprietary pac… |
1.3.6.1.4.1.9.9.86.1.4.1.1.15 | cdspVqmThreshSES | 0 | 0 | This attribute specifies the threshold for Severely Errored Second on VQM. If the total number of milliseconds sampled as bad vo… |
1.3.6.1.4.1.9.9.86.1.4.1.1.16 | cdspTransparentIpIp | 0 | 0 | This attribute is used to enable or disable the transparent mode when establishing a non-transcoding IP-IP connection. The attrib… |
1.3.6.1.4.1.9.9.86.1.4.1.1.17 | cdspVoiceModeIpIp | 0 | 0 | This object specifies the voice mode for IP IP connections. normal : A normal Mode is a transcoding mode for IP-IP connection… |