This object specifies when the RTCP receive timer
is started.
disabled - timer is disabled
startImmediately - timer starts immediately
as soon as RTCP is enabled
on the call
startRtpOrRtcpPktRcvd - timer starts upon reception of
the first RTP or RTCP packet
startRtcpPktRcvd - timer starts upon reception of
the first RTCP packet
Parsed from file CISCO-DSP-MGMT-MIB.mib
Module: CISCO-DSP-MGMT-MIB
This object specifies when the RTCP receive timer
is started.
disabled - timer is disabled
startImmediately - timer starts immediately
as soon as RTCP is enabled
on the call
startRtpOrRtcpPktRcvd - timer starts upon reception of
the first RTP or RTCP packet
startRtcpPktRcvd - timer starts upon reception of
the first RTCP packet
This object specifies when the RTCP receive timer
is started.
disabled - timer is disabled
startImmediately - timer starts immediately
as soon as RTCP is enabled
on the call
startRtpOrRtcpPktRcvd - timer starts upon reception of
the first RTP or RTCP packet
startRtcpPktRcvd - timer starts upon reception of
the first RTCP packet
Parsed from file CISCO-DSP-MGMT-MIB.my.txt
Company: None
Module: CISCO-DSP-MGMT-MIB
This object specifies when the RTCP receive timer
is started.
disabled - timer is disabled
startImmediately - timer starts immediately
as soon as RTCP is enabled
on the call
startRtpOrRtcpPktRcvd - timer starts upon reception of
the first RTP or RTCP packet
startRtcpPktRcvd - timer starts upon reception of
the first RTCP packet
cdspRtcpTimerControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), startImmediately(2), startRtpOrRtcpPktRcvd(3), startRtcpPktRcvd(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - timer starts immediately as soon as RTCP is enabled on the call startRtpOrRtcpPktRcvd - timer starts upon reception of the first RTP or RTCP packet startRtcpPktRcvd - timer starts upon reception of the first RTCP packet" DEFVAL { startRtcpPktRcvd } ::= { cdspVoiceParamEntry 8 }
cdspRtcpTimerControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), startImmediately(2), startRtpOrRtcpPktRcvd(3), startRtcpPktRcvd(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - timer starts immediately as soon as RTCP is enabled on the call startRtpOrRtcpPktRcvd - timer starts upon reception of the first RTP or RTCP packet startRtcpPktRcvd - timer starts upon reception of the first RTCP packet" DEFVAL { startRtcpPktRcvd } ::= { cdspVoiceParamEntry 8 }
Vendor: Cisco
Module: CISCO-DSP-MGMT-MIB
[Automatically extracted from oidview.com]
cdspRtcpTimerControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), startImmediately(2), startRtpOrRtcpPktRcvd(3), startRtcpPktRcvd(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - timer starts immediately as soon as RTCP is enabled on the call startRtpOrRtcpPktRcvd - timer starts upon reception of the first RTP or RTCP packet startRtcpPktRcvd - timer starts upon reception of the first RTCP packet" DEFVAL { startRtcpPktRcvd } ::= { cdspVoiceParamEntry 8 }
cdspRtcpTimerControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), startImmediately(2), startRtpOrRtcpPktRcvd(3), startRtcpPktRcvd(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies when the RTCP receive timer is started. disabled - timer is disabled startImmediately - timer starts immediately as soon as RTCP is enabled on the call startRtpOrRtcpPktRcvd - timer starts upon reception of the first RTP or RTCP packet startRtcpPktRcvd - timer starts upon reception of the first RTCP packet" DEFVAL { startRtcpPktRcvd } ::= { cdspVoiceParamEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.86.1.4.1.1.1 | cdspRtpSidPayloadType | 0 | 0 | This object specifies the RTP (Real Time Protocol) payload type of the SID (Silence Insertion Descriptor) packet that is sent to … |
1.3.6.1.4.1.9.9.86.1.4.1.1.2 | cdspRtcpControl | 0 | 0 | This objects controls if RTCP (Real Time Control Protocol) will be enabled. If this object is set to 'true', both transmission an… |
1.3.6.1.4.1.9.9.86.1.4.1.1.3 | cdspRtcpTransInterval | 0 | 0 | This attribute specifies the RTCP report interval (defined in RFC1889). It indicates the interval in which the RTCP reports shoul… |
1.3.6.1.4.1.9.9.86.1.4.1.1.4 | cdspRtcpRecvMultiplier | 0 | 0 | This object specifies an approximate RTCP report interval (defined in RFC 1889) in milliseconds in which the RTCP reports should … |
1.3.6.1.4.1.9.9.86.1.4.1.1.5 | cdspVadAdaptive | 0 | 0 | This attribute is used to enable or disable the Adaptive VAD knob of the VAD algorithm. Adaptive VAD works in conjunction with VA… |
1.3.6.1.4.1.9.9.86.1.4.1.1.6 | cdspDtmfPowerLevel | 0 | 0 | This object specifies the power level of the low frequency component of DTMF. The power level of the high frequency component of … |
1.3.6.1.4.1.9.9.86.1.4.1.1.7 | cdspDtmfPowerTwist | 0 | 0 | This object specifies the relative power level of the high frequency component of DTMF. The low frequency group is always fixed t… |
1.3.6.1.4.1.9.9.86.1.4.1.1.9 | cdspVqmControl | 0 | 0 | This object is used to disable VQM or enable either RFC 3611 RTCPXR or Extended Network Quality Metrics VQM. disable - VQM is dis… |
1.3.6.1.4.1.9.9.86.1.4.1.1.10 | cdspRtcpXrControl | 0 | 0 | This object controls if RTCPXR (Real Time Control Protocol Extended Report) is enabled. If this object is set to 'true', both tra… |
1.3.6.1.4.1.9.9.86.1.4.1.1.11 | cdspRtcpXrTransMultiplier | 0 | 0 | This object is used to configure the RTCPXR report frequency. i.e. how many RTCP packets during the interval of every RTCPXR pack… |
1.3.6.1.4.1.9.9.86.1.4.1.1.12 | cdspRtcpXrGminDefault | 0 | 0 | This object is the default minimum gap value configured for the IP stream. This object is applicable only if 'cdspVqmControl' is s… |
1.3.6.1.4.1.9.9.86.1.4.1.1.13 | cdspRtcpXrExtRfactor | 0 | 0 | This object is the external R factor metric value. The value 127 means it is not applicable. This object is applicable only if 'c… |
1.3.6.1.4.1.9.9.86.1.4.1.1.14 | cdspPktLossConcealment | 0 | 0 | This object specifies the packet loss concealment: (1) none: No packet loss concealment applied (2) simple: Cisco Proprietary pac… |
1.3.6.1.4.1.9.9.86.1.4.1.1.15 | cdspVqmThreshSES | 0 | 0 | This attribute specifies the threshold for Severely Errored Second on VQM. If the total number of milliseconds sampled as bad vo… |
1.3.6.1.4.1.9.9.86.1.4.1.1.16 | cdspTransparentIpIp | 0 | 0 | This attribute is used to enable or disable the transparent mode when establishing a non-transcoding IP-IP connection. The attrib… |
1.3.6.1.4.1.9.9.86.1.4.1.1.17 | cdspVoiceModeIpIp | 0 | 0 | This object specifies the voice mode for IP IP connections. normal : A normal Mode is a transcoding mode for IP-IP connection… |