This is a control variable.
It is written by an external management entity.
Changes take effect as soon as practical in the implementation.
This attribute specifies the number of TUs that a station uses for scheduling Measurement Pilot transmissions. This value is transmitted in Measurement Pilot frames. The default period is 25% of dot11BeaconPeriod.
Parsed from file 802_11mib.txt
Company: ieee
Module: IEEE802dot11-MIB
Vendor: IEEE
Module: IEEE802dot11-MIB (802_11mib)
Type: TABULAR
Access: read-write
Syntax: Unsigned32
(
1..255 )
Automatically extracted from www.mibdepot.com
dot11RMMeasurementPilotPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute specifies the number of TUs that a station uses for scheduling Measurement Pilot transmissions. This value is transmitted in Measurement Pilot frames. The default period is 25% of dot11BeaconPeriod." ::= { dot11StationConfigEntry 54 }
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.2.840.10036.1.1.1.4 | dot11CFPPeriod | 0 | 0 | The attribute shall describe the number of DTIM intervals between the start of CFPs. It is modified by MLME-START.request primit… |
1.2.840.10036.1.1.1.5 | dot11CFPMaxDuration | 0 | 0 | The attribute shall describe the maximum duration of the CFP in TU that may be generated by the PCF. It is modified by MLME-START… |
1.2.840.10036.1.1.1.6 | dot11AuthenticationResponseTimeOut | 0 | 0 | This attribute shall specify the number of time units (TUs) that a responding STA should wait for the next frame in the authentic… |
1.2.840.10036.1.1.1.7 | dot11PrivacyOptionImplemented | 0 | 0 | This attribute, when true, shall indicate that the IEEE 802.11 WEP option is implemented. The default value of this attribute sh… |
1.2.840.10036.1.1.1.8 | dot11PowerManagementMode | 0 | 0 | This attribute shall specify the power management mode of the STA. When set to active, it shall indicate that the station is not … |
1.2.840.10036.1.1.1.9 | dot11DesiredSSID | 0 | 0 | This attribute reflects the Service Set ID (SSID) used in the DesiredSSID parameter of the most recent MLME_Scan.request. This v… |
1.2.840.10036.1.1.1.10 | dot11DesiredBSSType | 0 | 0 | This attribute shall specify the type of BSS the station shall use when scanning for a BSS with which to synchronize. This value … |
1.2.840.10036.1.1.1.11 | dot11OperationalRateSet | 0 | 0 | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representi… |
1.2.840.10036.1.1.1.12 | dot11BeaconPeriod | 0 | 0 | This attribute shall specify the number of TUs that a station shall use for scheduling Beacon transmissions. This value is transm… |
1.2.840.10036.1.1.1.13 | dot11DTIMPeriod | 0 | 0 | This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a… |
1.2.840.10036.1.1.1.14 | dot11AssociationResponseTimeOut | 0 | 0 | This attribute shall specify the number of TU that a requesting STA should wait for a response to a transmitted association-reque… |
1.2.840.10036.1.1.1.15 | dot11DisassociateReason | 0 | 0 | This attribute holds the most recently transmitted Reason Code in a Disassociation frame. If no Disassociation frame has been tra… |
1.2.840.10036.1.1.1.16 | dot11DisassociateStation | 0 | 0 | This attribute holds the MAC address from the Address 1 field of the most recently transmitted Disassociation frame. If no Disas… |
1.2.840.10036.1.1.1.17 | dot11DeauthenticateReason | 0 | 0 | This attribute holds the most recently transmitted Reason Code in a Deauthentication frame. If no Deauthentication frame has bee… |
1.2.840.10036.1.1.1.18 | dot11DeauthenticateStation | 0 | 0 | This attribute holds the MAC address from the Address 1 field of the most recently transmitted Deauthentication frame. If no Dea… |
1.2.840.10036.1.1.1.19 | dot11AuthenticateFailStatus | 0 | 0 | This attribute holds the most recently transmitted Status Code in a failed Authentication frame. If no failed Authentication fram… |
1.2.840.10036.1.1.1.20 | dot11AuthenticateFailStation | 0 | 0 | This attribute holds the MAC address from the Address 1 field of the most recently transmitted failed Authentication frame. If n… |
1.2.840.10036.1.1.1.21 | dot11MultiDomainCapabilityImplemented | 0 | 0 | This attribute, when TRUE, indicates that the station implementation is capable of supporting multiple regulatory domains. The c… |
1.2.840.10036.1.1.1.22 | dot11MultiDomainCapabilityEnabled, dot11MultiDomainCapabilityActivated | 0 | 0 | This attribute, when TRUE, indicates that the capability of the station to operate in multiple regulatory domains is enabled. Th… |
1.2.840.10036.1.1.1.23 | dot11CountryString | 0 | 0 | This attribute identifies the country in which the station is operating. The first two octets of this string is the two character… |
1.2.840.10036.1.1.1.24 | dot11SpectrumManagementImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.25 | dot11SpectrumManagementRequired | 0 | 0 | This is a control variable. It is written by the SME or external management entity. Changes take effect for the next MLME-START.r… |
1.2.840.10036.1.1.1.26 | dot11RSNAOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This variable indicates whether the entity is RSNA… |
1.2.840.10036.1.1.1.27 | dot11RSNAPreauthenticationImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This variable indicates whether the entity support… |
1.2.840.10036.1.1.1.28 | dot11OperatingClassesImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.29 | dot11OperatingClassesRequired | 0 | 0 | This is a control variable. It is written by the SME or external management entity. Changes take effect for the next MLME-START.r… |
1.2.840.10036.1.1.1.30 | dot11QosOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.31 | dot11ImmediateBlockAckOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.32 | dot11DelayedBlockAckOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.33 | dot11DirectOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.34 | dot11APSDOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute is available only at an AP. When tr… |
1.2.840.10036.1.1.1.35 | dot11QAckOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.36 | dot11QBSSLoadImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute is available only at an AP. This at… |
1.2.840.10036.1.1.1.37 | dot11QueueRequestOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute is available only at an AP. This at… |
1.2.840.10036.1.1.1.38 | dot11TXOPRequestOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute is available only at an AP. This at… |
1.2.840.10036.1.1.1.39 | dot11MoreDataAckOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.40 | dot11AssociateInNQBSS | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.41 | dot11DLSAllowedInQBSS | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.42 | dot11DLSAllowed | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.43 | dot11AssociateStation | 0 | 0 | This is a status variable. It is written by the MAC when a STA associates. This attribute indicates the MAC address from the Addr… |
1.2.840.10036.1.1.1.44 | dot11AssociateID | 0 | 0 | This is a status variable. It is written by the MAC when a STA associates. This attribute indicates the Association ID from the m… |
1.2.840.10036.1.1.1.45 | dot11AssociateFailStation | 0 | 0 | This is a status variable. It is written by the MAC when a STA fails to associate. This attribute indicates the MAC address from … |
1.2.840.10036.1.1.1.46 | dot11AssociateFailStatus | 0 | 0 | This is a status variable. It is written by the MAC when a STA fails to associate. This attribute indicates the most recently tra… |
1.2.840.10036.1.1.1.47 | dot11ReassociateStation | 0 | 0 | This is a status variable. It is written by the MAC when a STA reassociates. This attribute indicates the MAC address from the Ad… |
1.2.840.10036.1.1.1.48 | dot11ReassociateID | 0 | 0 | This is a status variable. It is written by the MAC when a STA reassociates. This attribute indicates the Association ID from the… |
1.2.840.10036.1.1.1.49 | dot11ReassociateFailStation | 0 | 0 | This is a status variable. It is written by the MAC when a STA fails to reassociate. This attribute indicates the MAC address fro… |
1.2.840.10036.1.1.1.50 | dot11ReassociateFailStatus | 0 | 0 | This is a status variable. It is written by the MAC when a STA fails to reassociate. This attribute indicates the most recently t… |
1.2.840.10036.1.1.1.51 | dot11RadioMeasurementImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.52 | dot11RadioMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity when any of the MIB variables listed in 8.4.2.47 is e… |
1.2.840.10036.1.1.1.53 | dot11RMMeasurementProbeDelay | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.55 | dot11RMLinkMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.56 | dot11RMNeighborReportActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.57 | dot11RMParallelMeasurementsActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.58 | dot11RMRepeatedMeasurementsActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.59 | dot11RMBeaconPassiveMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.60 | dot11RMBeaconActiveMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.61 | dot11RMBeaconTableMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.62 | dot11RMBeaconMeasurementReportingConditionsActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.63 | dot11RMFrameMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.64 | dot11RMChannelLoadMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.65 | dot11RMNoiseHistogramMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.66 | dot11RMStatisticsMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.67 | dot11RMLCIMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.68 | dot11RMLCIAzimuthActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.69 | dot11RMTransmitStreamCategoryMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.70 | dot11RMTriggeredTransmitStreamCategoryMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.71 | dot11RMAPChannelReportActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.72 | dot11RMMIBActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.73 | dot11RMMaxMeasurementDuration | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.74 | dot11RMNonOperatingChannelMaxMeasurementDuration | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.75 | dot11RMMeasurementPilotTransmissionInformationActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.76 | dot11RMMeasurementPilotActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.77 | dot11RMNeighborReportTSFOffsetActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.78 | dot11RMRCPIMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.79 | dot11RMRSNIMeasurementActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.80 | dot11RMBSSAverageAccessDelayActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.81 | dot11RMBSSAvailableAdmissionCapacityActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.82 | dot11RMAntennaInformationActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect for the next MLME-START.request p… |
1.2.840.10036.1.1.1.83 | dot11FastBSSTransitionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This object indicates if the entity is fast BSS tr… |
1.2.840.10036.1.1.1.84 | dot11LCIDSEImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.85 | dot11LCIDSERequired | 0 | 0 | This is a control variable. It is written by the SME. A STA uses the Dependent Station Enablement procedures if this attribute is… |
1.2.840.10036.1.1.1.86 | dot11DSERequired | 0 | 0 | This is a control variable. It is written by the SME. This attribute, when true, indicates that the station operation is dependen… |
1.2.840.10036.1.1.1.87 | dot11ExtendedChannelSwitchActivated | 0 | 0 | This is a control variable. It is written by the SME when the device is initialized for operation in a band defined by an Operat… |
1.2.840.10036.1.1.1.88 | dot11RSNAProtectedManagementFramesActivated | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.89 | dot11RSNAUnprotectedManagementFramesAllowed | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.90 | dot11AssociationSAQueryMaximumTimeout | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.91 | dot11AssociationSAQueryRetryTimeout | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.92 | dot11HighThroughputOptionImplemented | 0 | 0 | dot11HighthroughputOptionImplemented |
1.2.840.10036.1.1.1.93 | dot11RSNAPBACRequired | 0 | 0 | This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the imple… |
1.2.840.10036.1.1.1.94 | dot11PSMPOptionImplemented | 0 | 0 | This is a capability variable. Its value is determined by device capabilities. This attribute, when true, indicates that the stat… |
1.2.840.10036.1.1.1.95 | dot11TunneledDirectLinkSetupImplemented | 0 | 0 | This attribute, when true, indicates that the STA implementation is capable of supporting Tunneled DirectLink Setup. |
1.2.840.10036.1.1.1.96 | dot11TDLSPeerUAPSDBufferSTAActivated | 0 | 0 | This attribute, when true, indicates that the STA implementation is capable of supporting TDLS Peer U-APSD. |
1.2.840.10036.1.1.1.97 | dot11TDLSPeerPSMActivated | 0 | 0 | This attribute, when true, indicates that the STA implementation is capable of supporting TDLS Peer PSM. |
1.2.840.10036.1.1.1.98 | dot11TDLSPeerUAPSDIndicationWindow | 0 | 0 | This attribute indicates the minimum interval in Beacon Intervals between successive Peer Traffic Indication frames. |
1.2.840.10036.1.1.1.99 | dot11TDLSChannelSwitchingActivated | 0 | 0 | This attribute, when true, indicates that the STA implementation is capable of supporting TDLS Channel Switching. |
1.2.840.10036.1.1.1.100 | dot11TDLSPeerSTAMissingAckRetryLimit | 0 | 0 | This attribute indicates the number of times the TDLS STA may retry a frame for which it does not receive an ACK from TDLS peer… |
1.2.840.10036.1.1.1.101 | dot11TDLSResponseTimeout | 0 | 0 | This attribute indicates the amount of time in units of seconds the STA waits before timing out a TDLS setup request. |
1.2.840.10036.1.1.1.102 | dot11OCBActivated | 0 | 0 | A STA uses the defined outside the context of a BSS procedures if and only if this attribute is true. The default value of this… |
1.2.840.10036.1.1.1.103 | dot11TDLSProbeDelay | 0 | 0 | This attribute indicates the amount of time in units of microseconds the STA waits before transmitting on a new channel, in the… |
1.2.840.10036.1.1.1.104 | dot11TDLSDiscoveryRequestWindow | 0 | 0 | This attribute indicates the minimum number of DTIM intervals between successive TDLS Discovery Request frames. |
... |