This attribute, indicates which of the algorithms
will be used to generate the Hopping Patterns.
Valid values are:
1 - hopping patterns as defined in clause 14
2 - hop index method (with or without table)
3 - HCC/EHCC method
Parsed from file IEEE802dot11-MIB.mib
Module: IEEE802dot11-MIB
This attribute, indicates which of the algorithms
will be used to generate the Hopping Patterns.
Valid values are:
1 - hopping patterns as defined in clause 14
2 - hop index method (with or without table)
3 - HCC/EHCC method
This is a control variable.
It is written by an external management entity.
Changes take effect as soon as practical in the implementation.
This attribute, indicates which of the algorithms is used to generate the Hopping Patterns.
Valid values are:
1 - hopping patterns as defined in Clause 14
2 - hop index method (with or without table)
3 - HCC/EHCC method
Parsed from file 802_11mib.txt
Company: None
Module: IEEE802dot11-MIB
This attribute, indicates which of the algorithms
will be used to generate the Hopping Patterns.
Valid values are:
1 - hopping patterns as defined in clause 14
2 - hop index method (with or without table)
3 - HCC/EHCC method
dot11HopAlgorithmAdopted OBJECT-TYPE SYNTAX INTEGER { crnt(1), hopindex(2), hcc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method" ::= { dot11PhyFHSSEntry 12 }
dot11HopAlgorithmAdopted OBJECT-TYPE SYNTAX INTEGER { crnt(1), hopindex(2), hcc(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method" ::= { dot11PhyFHSSEntry 12 }
Vendor: Cisco Systems
Module: IEEE802dot11-MIB (IEEE802dot11-MIB-V1SMI.my)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
dot11HopAlgorithmAdopted OBJECT-TYPE SYNTAX INTEGER { crnt(1), hopindex(2), hcc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is a control variable. It is written by an external management entity. Changes take effect as soon as practical in the implementation. This attribute, indicates which of the algorithms is used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in Clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method" ::= { dot11PhyFHSSEntry 12 }
dot11HopAlgorithmAdopted OBJECT-TYPE SYNTAX INTEGER { crnt(1), hopindex(2), hcc(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute, indicates which of the algorithms will be used to generate the Hopping Patterns. Valid values are: 1 - hopping patterns as defined in clause 14 2 - hop index method (with or without table) 3 - HCC/EHCC method" ::= { dot11PhyFHSSEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.2.840.10036.4.4.1.1 | dot11HopTime | 0 | 0 | The time in microseconds for the PMD to change from channel 2 to channel 80. |
1.2.840.10036.4.4.1.2 | dot11CurrentChannelNumber | 0 | 0 | The current channel number of the frequency output by the RF synthesizer. |
1.2.840.10036.4.4.1.3 | dot11MaxDwellTime | 0 | 0 | The maximum time in TU that the transmitter is permitted to operate on a single channel. |
1.2.840.10036.4.4.1.4 | dot11CurrentDwellTime | 0 | 0 | The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. Default is 19 TU. |
1.2.840.10036.4.4.1.5 | dot11CurrentSet | 0 | 0 | The current set of patterns the PLME is using to determine the hopping sequence. |
1.2.840.10036.4.4.1.6 | dot11CurrentPattern | 0 | 0 | The current pattern the PLME is using to determine the hop sequence. |
1.2.840.10036.4.4.1.7 | dot11CurrentIndex | 0 | 0 | The current index value the PLME is using to determine the CurrentChannelNumber. |
1.2.840.10036.4.4.1.8 | dot11EHCCPrimeRadix | 0 | 0 | This attribute indicates the value to be used as the prime radix (N) in the HCC and EHCC algorithms. |
1.2.840.10036.4.4.1.9 | dot11EHCCNumberofChannelsFamilyIndex | 0 | 0 | This attribute indicates the value to be used as the maximum for the family index (a) in the HCC and EHCC algorithms. The value o… |
1.2.840.10036.4.4.1.10 | dot11EHCCCapabilityImplemented | 0 | 0 | This attribute, when TRUE, indicates that the station implementation is capable of generating the HCC or EHCC algorithms for dete… |
1.2.840.10036.4.4.1.11 | dot11EHCCCapabilityEnabled, dot11EHCCCapabilityActivated | 0 | 0 | This attribute, when TRUE, indicates that the capability of the station to operate using the HCC or EHCC algorithms for determini… |
1.2.840.10036.4.4.1.13 | dot11RandomTableFlag | 0 | 0 | This attribute, indicates that a Random Table is present when the value is True. When the value is False it indicates that a Rand… |
1.2.840.10036.4.4.1.14 | dot11NumberofHoppingSets | 0 | 0 | The Number of Sets field indicates the total number of sets within the hopping patterns. |
1.2.840.10036.4.4.1.15 | dot11HopModulus | 0 | 0 | The number of allowed channels for the hopping set. This is defined by the governing regulatory agency for the country code of th… |
1.2.840.10036.4.4.1.16 | dot11HopOffset | 0 | 0 | The next position in the hopping set. |