Reference record for OID 1.2.840.10036.4.4.1.15


parent
1.2.840.10036.4.4.1 (dot11PhyFHSSEntry)
node code
15
node name
dot11HopModulus
dot oid
1.2.840.10036.4.4.1.15
type
OBJECT-TYPE
asn1 oid
  • {iso(1) member-body(2) us(840) ieee802dot11(10036) dot11phy(4) dot11PhyFHSSTable(4) dot11PhyFHSSEntry(1) dot11HopModulus(15)}
    • iri oid
  • /iso/member-body/us/ieee802dot11/dot11phy/dot11PhyFHSSTable/dot11PhyFHSSEntry/dot11HopModulus
    • iri by oid_info
    /ISO/Member-Body/US/10036/4/4/1/15

    Description by circitor

    The number of allowed channels for the hopping
    set. This is defined by the governing regulatory
    agency for the country code of the country
    in which this device is operating.

    Parsed from file IEEE802dot11-MIB.mib
    Module: IEEE802dot11-MIB

    Description by cisco_v1

    The number of allowed channels for the hopping
    set. This is defined by the governing regulatory
    agency for the country code of the country
    in which this device is operating.

    Description by mibdepot

    This is a control variable.
    It is written by the SME when the device is initialized.

    The number of allowed channels for the hopping set. This is defined by the governing regulatory agency for the country code of the country in which this device is operating.

    Parsed from file 802_11mib.txt
    Company: None
    Module: IEEE802dot11-MIB

    Description by cisco

    The number of allowed channels for the hopping
    set. This is defined by the governing regulatory
    agency for the country code of the country
    in which this device is operating.

    Information by circitor

    dot11HopModulus OBJECT-TYPE
		SYNTAX Integer32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The number of allowed channels for the hopping 
			set. This is defined by the governing regulatory 
			agency for the country code of the country 
			in which this device is operating."
    ::= { dot11PhyFHSSEntry 15 }

    Information by cisco_v1

    dot11HopModulus OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The number of allowed channels for the hopping 
        set. This is defined by the governing regulatory 
        agency for the country code of the country 
        in which this device is operating."
    ::= { dot11PhyFHSSEntry 15 }

    Information by oid_info

    Vendor: Cisco Systems
    Module: IEEE802dot11-MIB (IEEE802dot11-MIB-V1SMI.my)
    Type: TABULAR
    Access: read-only
    Syntax: INTEGER

    Automatically extracted from www.mibdepot.com

    Information by mibdepot

    dot11HopModulus OBJECT-TYPE
	SYNTAX Unsigned32
	MAX-ACCESS read-only
	STATUS current
	DESCRIPTION
		"This is a control variable.
		It is written by the SME when the device is initialized.

		The number of allowed channels for the hopping set. This is defined by the governing regulatory agency for the country code of the country in which this device is operating."
	::= { dot11PhyFHSSEntry 15 }

    Information by cisco

    dot11HopModulus OBJECT-TYPE
		SYNTAX Integer32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The number of allowed channels for the hopping 
			set. This is defined by the governing regulatory 
			agency for the country code of the country 
			in which this device is operating."
    ::= { dot11PhyFHSSEntry 15 }

    First Registration Authority (recovered by parent 1.2.840.10036)

    Vic Hayes

    Current Registration Authority (recovered by parent 1.2.840)

    Joyce Hsu

    Brothers (15)

    OIDNameSub childrenSub Nodes TotalDescription
    1.2.840.10036.4.4.1.1 dot11HopTime 0 0 The time in microseconds for the PMD to change from
    channel 2 to channel 80.
    1.2.840.10036.4.4.1.2 dot11CurrentChannelNumber 0 0 The current channel number of the frequency output by the RF
    synthesizer.
    1.2.840.10036.4.4.1.3 dot11MaxDwellTime 0 0 The maximum time in TU that the transmitter
    is permitted to operate on a single channel.
    1.2.840.10036.4.4.1.4 dot11CurrentDwellTime 0 0 The current time in TU that the transmitter shall operate
    on a single channel, as set by the MAC. Default is 19 TU.
    1.2.840.10036.4.4.1.5 dot11CurrentSet 0 0 The current set of patterns the PLME
    is using to determine the hopping sequence.
    1.2.840.10036.4.4.1.6 dot11CurrentPattern 0 0 The current pattern the PLME is
    using to determine the hop sequence.
    1.2.840.10036.4.4.1.7 dot11CurrentIndex 0 0 The current index value the PLME is using to determine
    the CurrentChannelNumber.
    1.2.840.10036.4.4.1.8 dot11EHCCPrimeRadix 0 0 This attribute indicates the value to be
    used as the prime radix (N) in the HCC and
    EHCC algorithms.
    1.2.840.10036.4.4.1.9 dot11EHCCNumberofChannelsFamilyIndex 0 0 This attribute indicates the value to be
    used as the maximum for the family index (a)
    in the HCC and EHCC algorithms. The value o…
    1.2.840.10036.4.4.1.10 dot11EHCCCapabilityImplemented 0 0 This attribute, when TRUE, indicates that the
    station implementation is capable of generating
    the HCC or EHCC algorithms for dete…
    1.2.840.10036.4.4.1.11 dot11EHCCCapabilityEnabled, dot11EHCCCapabilityActivated 0 0 This attribute, when TRUE, indicates that the
    capability of the station to operate using the HCC
    or EHCC algorithms for determini…
    1.2.840.10036.4.4.1.12 dot11HopAlgorithmAdopted 0 0 This attribute, indicates which of the algorithms
    will be used to generate the Hopping Patterns.
    Valid values are:

    1 - hopping pa…
    1.2.840.10036.4.4.1.13 dot11RandomTableFlag 0 0 This attribute, indicates that a Random Table is
    present when the value is True. When the value is
    False it indicates that a Rand…
    1.2.840.10036.4.4.1.14 dot11NumberofHoppingSets 0 0 The Number of Sets field indicates the total
    number of sets within the hopping patterns.
    1.2.840.10036.4.4.1.16 dot11HopOffset 0 0 The next position in the hopping set.