If wmanIfCmnClassifierRuleEnetProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If wmanIfCmnClassifierRuleEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If wmanIfCmnClassifierRuleEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If the Ethernet frame contains an 802.1P/Q Tag header (i.e. EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0.
Status in source: current.
Names: wmanIfCmnClassifierRuleEnetProtocol
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wmanIfCmnClassifierRuleEnetProtocol",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"If wmanIfCmnClassifierRuleEnetProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If wmanIfCmnClassifierRuleEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If wmanIfCmnClassifierRuleEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If the Ethernet frame contains an 802.1P/Q Tag header (i.e. EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0.\"",
"REFERENCE",
"\"Section 11.13.19.3.4.10 in IEEE 802.16REVd/D5-2004\"",
"::=",
"{",
"wmanIfCmnClassifierRuleEntry",
"22",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If wmanIfCmnClassifierRuleEnetProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If wmanIfCmnClassifierRuleEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If wmanIfCmnClassifierRuleEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If the Ethernet frame contains an 802.1P/Q Tag header (i.e. EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0."
],
[
"REFERENCE",
"Section 11.13.19.3.4.10 in IEEE 802.16REVd/D5-2004"
],
null,
null,
null
]
}- etsi-formal
· Publisher's source file
Source location: PDF page 74/WMAN-IF-MIB::wmanIfCmnClassifierRuleEnetProtocol.Source version and references
Published package: ETSI TS 102389 1.1.1; file: ts_102389v010101p.pdf.
Downloaded: 2026-10-19T23:15:36.254096+00:00. SHA-256:
624ae041d6abee4b6cf0a5b3bf2ae2b0e602a96229c82d5ac5ed39f9c531f2d1{'kind': 'OBJECT-TYPE', 'details': {'module': 'WMAN-IF-MIB', 'imports': {'IF-MIB': ['ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString', 'TimeInterval', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'TimeTicks', 'IpAddress', 'transmission'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}, 'document': {'language': 'pdf', 'pdf_page': 74, 'software': 'ETSI TS 102389', 'extraction_note': 'Definition is pdftotext output; locate it by module/symbol on the stated physical PDF page, not by a claimed byte offset', 'release_version': '1.1.1'}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'wmanIfCmnClassifierRuleEnetProtocol OBJECT-TYPE\n SYNTAX Integer32 (0..65535)\n MAX-ACCESS read-only\n STATUS current\n DESCRIPTION\n "If wmanIfCmnClassifierRuleEnetProtocolType is none(0),\n this object is ignored when considering whether a packet\n matches the current rule.\n If wmanIfCmnClassifierRuleEnetProtocolType is ethertype(1),\n this object gives the 16-bit value of the EtherType that\n the packet must match in order to match the rule.\n If wmanIfCmnClassifierRuleEnetProtocolType is dsap(2), the\n lower 8 bits of this object\'s value must match the DSAP\n byte of the packet in order to match the rule.\n If the Ethernet frame contains an 802.1P/Q Tag header\n (i.e. EtherType 0x8100), this object applies to the\n embedded EtherType field within the 802.1P/Q header.\n If the referenced parameter is not present in the\n classifier, the value of this object is reported as 0."\n\n\n\n\n\n\n\n REFERENCE\n "Section 11.13.19.3.4.10 in IEEE 802.16REVd/D5-2004"\n ::= { wmanIfCmnClassifierRuleEntry 22 }', 'syntax_tree': [['SimpleSyntax', 'Integer32', ['integerSubType', [[0, 65535]]]], None, ['MaxAccessPart', 'read-only'], ['Status', 'current'], ['DESCRIPTION', "If wmanIfCmnClassifierRuleEnetProtocolType is none(0), this object is ignored when considering whether a packet matches the current rule. If wmanIfCmnClassifierRuleEnetProtocolType is ethertype(1), this object gives the 16-bit value of the EtherType that the packet must match in order to match the rule. If wmanIfCmnClassifierRuleEnetProtocolType is dsap(2), the lower 8 bits of this object's value must match the DSAP byte of the packet in order to match the rule. If the Ethernet frame contains an 802.1P/Q Tag header (i.e. EtherType 0x8100), this object applies to the embedded EtherType field within the 802.1P/Q header. If the referenced parameter is not present in the classifier, the value of this object is reported as 0."], ['REFERENCE', 'Section 11.13.19.3.4.10 in IEEE 802.16REVd/D5-2004'], None, None, None], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'formal-3-q1'}