The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is used as default in provisioned service flows classifiers. The default value of 64 is used for dynamic service flow classifiers. If the referenced parameter is not present in a classifier, this object reports the default value as defined above
Status in source: current.
Names: wmanIfCmnClassifierRulePriority
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wmanIfCmnClassifierRulePriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"255",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is used as default in provisioned service flows classifiers. The default value of 64 is used for dynamic service flow classifiers. If the referenced parameter is not present in a classifier, this object reports the default value as defined above\"",
"REFERENCE",
"\"Section 11.13.19.3.4.1 in IEEE 802.16REVd/D5-2004\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"wmanIfCmnClassifierRuleEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is used as default in provisioned service flows classifiers. The default value of 64 is used for dynamic service flow classifiers. If the referenced parameter is not present in a classifier, this object reports the default value as defined above"
],
[
"REFERENCE",
"Section 11.13.19.3.4.1 in IEEE 802.16REVd/D5-2004"
],
null,
null,
[
"DEFVAL",
0
]
]
}- etsi-formal
· Publisher's source file
Source location: PDF page 70/WMAN-IF-MIB::wmanIfCmnClassifierRulePriority.Source version and references
Published package: ETSI TS 102389 1.1.1; file: ts_102389v010101p.pdf.
Downloaded: 2026-10-19T23:15:36.254096+00:00. SHA-256:
624ae041d6abee4b6cf0a5b3bf2ae2b0e602a96229c82d5ac5ed39f9c531f2d1{'kind': 'OBJECT-TYPE', 'details': {'module': 'WMAN-IF-MIB', 'imports': {'IF-MIB': ['ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString', 'TimeInterval', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'TimeTicks', 'IpAddress', 'transmission'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}, 'document': {'language': 'pdf', 'pdf_page': 70, 'software': 'ETSI TS 102389', 'extraction_note': 'Definition is pdftotext output; locate it by module/symbol on the stated physical PDF page, not by a claimed byte offset', 'release_version': '1.1.1'}, 'smi_kind': 'OBJECT-TYPE', 'definition': 'wmanIfCmnClassifierRulePriority OBJECT-TYPE\n SYNTAX INTEGER (0..255)\n MAX-ACCESS read-only\n STATUS current\n\n\n\n\n\n\n\n DESCRIPTION\n "The value specifies the order of evaluation of the\n classifiers. The higher the value the higher the\n priority. The value of 0 is used as default in\n provisioned service flows classifiers. The default\n value of 64 is used for dynamic service flow classifiers.\n If the referenced parameter is not present in a classifier,\n this object reports the default value as defined above"\n REFERENCE\n "Section 11.13.19.3.4.1 in IEEE 802.16REVd/D5-2004"\n DEFVAL { 0 }\n ::= { wmanIfCmnClassifierRuleEntry 3 }', 'syntax_tree': [['SimpleSyntax', 'INTEGER', ['integerSubType', [[0, 255]]]], None, ['MaxAccessPart', 'read-only'], ['Status', 'current'], ['DESCRIPTION', 'The value specifies the order of evaluation of the classifiers. The higher the value the higher the priority. The value of 0 is used as default in provisioned service flows classifiers. The default value of 64 is used for dynamic service flow classifiers. If the referenced parameter is not present in a classifier, this object reports the default value as defined above'], ['REFERENCE', 'Section 11.13.19.3.4.1 in IEEE 802.16REVd/D5-2004'], None, None, ['DEFVAL', 0]], 'source_encoding': 'utf-8-sig'}, 'parser_version': 'formal-3-q1'}