OID reference
1.3.6.1.2.1.10.7.20.1.1.1.11
Setting the value of this object to clear(1) clears the value of the pethPsePortStatus to none(1).
Identification
{1 3 6 1 2 1 10 7 20 1 1 1 11}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | clear | 1 |
| 2 | off | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In POWER-ETHERNET-MIB, the row index consists of these components in order:
pethPsePortGroupIndex (INTEGER): one numeric subidentifier for the non-negative value.pethPsePortIndex (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.2.1.10.7.20.1.1.1.11.<pethPsePortGroupIndex>.<pethPsePortIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: oldPethPsePortGroupIndex, oldPethPsePortIndex; pethPsePortGroupIndex, pethPsePortIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.2.1.10.7.20.1.1.1.11
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
oldPethPsePortCurrentStatusClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to clear(1) clears the value
of the oldPethPsePortStatus and enable the agent to update the
oldPethPsePortStatus.
Read operation this value will be off(2)."
::= { oldPethPsePortEntry 11 }pethPsePortMPSAbsentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the
pethPsePortPowerMaintenanceStatus attribute changes from any
value to the value mPSAbsent(3)."
REFERENCE "[IEEE Draft P802.3af/D3.3, October, 2002, object
30.9.1.1.9 aPSEUnderCurrentCounter]"
::= { pethPsePortEntry 11 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from PETH-MIB-hubmib-00.txt · ietf_drafts · PETH-MIB
Source file: Download PETH-MIB-hubmib-00.txt
Description 2
Setting the value of this object to clear(1) clears the value of the oldPethPsePortStatus and enable the agent to update the oldPethPsePortStatus. Read operation this value will be off(2).
Description 3
Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3).
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: oldPethPsePortCurrentStatusClear
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"oldPethPsePortCurrentStatusClear",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"clear",
"(",
"1",
")",
",",
"off",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setting the value of this object to clear(1) clears the value of the oldPethPsePortStatus and enable the agent to update the oldPethPsePortStatus. Read operation this value will be off(2).\"",
"::=",
"{",
"oldPethPsePortEntry",
"11",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"clear",
1
],
[
"off",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setting the value of this object to clear(1) clears the value of the oldPethPsePortStatus and enable the agent to update the oldPethPsePortStatus. Read operation this value will be off(2)."
],
null,
null,
null,
null
]
}Module: OLD-POWER-ETHERNET-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'EtherLike-MIB': ['dot3']}Status in source: current.
Names: pethPsePortMPSAbsentCounter
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pethPsePortMPSAbsentCounter",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3).\"",
"REFERENCE",
"\"[IEEE Draft P802.3af/D3.3, October, 2002, object 30.9.1.1.9 aPSEUnderCurrentCounter]\"",
"::=",
"{",
"pethPsePortEntry",
"11",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Counts the number of times that the pethPsePortPowerMaintenanceStatus attribute changes from any value to the value mPSAbsent(3)."
],
[
"REFERENCE",
"[IEEE Draft P802.3af/D3.3, October, 2002, object 30.9.1.1.9 aPSEUnderCurrentCounter]"
],
null,
null,
null
]
}Module: POWER-ETHERNET-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Counter32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'EtherLike-MIB': ['dot3']}Historical records
pethPsePortStatusClear OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting the value of this object to clear(1) clears the value
of the pethPsePortStatus to none(1)."
::= { pethPsePortEntry 11 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.7.20.1.1.1.1 | pethPsePortGroupIndex, oldPethPsePortGroupIndex | 0 | 0 | This variable uniquely identifies the group containing the port to which power Ethernet PSE is connected. Group means a box in th… |
| 1.3.6.1.2.1.10.7.20.1.1.1.2 | pethPsePortIndex, oldPethPsePortIndex | 0 | 0 | This variable uniquely identifies the power Ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entr… |
| 1.3.6.1.2.1.10.7.20.1.1.1.3 | pethPsePortAdminEnable, oldPethPsePortAdminEnable, pethPsePortPowerEnable | 0 | 0 | Enables power supply on this port. Setting this object at a value auto(1) enables power and detection mechanism for this port. Set… |
| 1.3.6.1.2.1.10.7.20.1.1.1.4 | pethPsePortPowerPairsControlAbility, oldPethPsePortPowerPairsControlAbility, pethPsePortPowerIdPairsControl | 0 | 0 | Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. |
| 1.3.6.1.2.1.10.7.20.1.1.1.5 | pethPsePortPowerPairs, oldPethPsePortPowerPairs, pethPsePortPowerIdPairs | 0 | 0 | Describes or controls the pairs in use. If the value of pethPsePortPowerIdpairsControl is true, thisobject is writable. A value of… |
| 1.3.6.1.2.1.10.7.20.1.1.1.6 | pethPsePortPowerDetectionControl, oldPethPsePortPowerDetectionControl, pethPsePortPowerDetectionStatus | 0 | 0 | Controls the power detection mechanism of the port. Setting the value auto(1) enables the power detection mechanism of the port. S… |
| 1.3.6.1.2.1.10.7.20.1.1.1.7 | pethPsePortDetectionStatus, oldPethPsePortDetectionStatus, pethPsePortDetectionOperStatus | 0 | 0 | Describes the operational status of the port detection. A value of deliveringPower(1) indicates that the port executed the detect… |
| 1.3.6.1.2.1.10.7.20.1.1.1.8 | pethPsePortPowerPriority, oldPethPsePortPowerPriority | 0 | 0 | This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by… |
| 1.3.6.1.2.1.10.7.20.1.1.1.9 | pethPsePortDenyError | 0 | 0 | This object describes an error resulted from an action of the power management mechanism. The value lowPriority(2) indicates that… |
| 1.3.6.1.2.1.10.7.20.1.1.1.10 | pethPsePortPowerMaintenanceStatus, oldPethPsePortCurrentStatus, pethPsePortStatus | 0 | 0 | Describes a current port status related to the power generation The value underCurrent(2) indicates that the port current is belo… |
| 1.3.6.1.2.1.10.7.20.1.1.1.12 | pethPsePortOverCurrentCounter, oldPethPsePortType, pethPsePortType | 0 | 0 | A manager will set the value of this variable to a value that indicates the type of the device that is connected to theport. This… |
| 1.3.6.1.2.1.10.7.20.1.1.1.13 | pethPsePortType, oldPethPsePortPowerClassifications, pethPsePortPowerClassifications | 0 | 0 | Classification is a way to tag different terminals on the power over LAN network according to their power consumption. Devices su… |
| 1.3.6.1.2.1.10.7.20.1.1.1.14 | pethPsePortPowerClassifications | 0 | 0 |