OID reference

vdslLineConfHamBandMask

1.3.6.1.2.1.10.97.1.1.11.1.36

Description

The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio band notching is defined in the VDSL spectrum as follows: Band Start Frequency Stop Frequency 30m 1810 kHz 2000 kH…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.2.1.10.97.1.1.11.1 (vdslLineConfProfileEntry)
Node code
36
Node name
vdslLineConfHamBandMask
Category
SNMP management object
Numeric OID
1.3.6.1.2.1.10.97.1.1.11.1.36
URN notation
urn:oid:1.3.6.1.2.1.10.97.1.1.11.1.36
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 2 1 10 97 1 1 11 1 36}

  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfHamBandMask(36)}
OID-IRI notation
  • /1/3/6/1/2/1/10/97/1/1/11/1/36
  • /ISO/Identified-Organization/6/1/2/1/10/97/1/1/11/1/36
  • /ISO/3/6/1/2/1/10/97/1/1/11/1/36
Named path variants
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/org/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/org/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/org/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-identified-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask
  • /iso/iso-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfHamBandMask

SNMP properties

Value type
BITS
Maximum access defined by MIB
read-create
Status in MIB
current

Bit values

Notes below names come from selected MIB definitions.

Bit positionName and source notes
0customNotch1
custom (region-specific) notch
1customNotch2
custom (region-specific) notch
2amateurBand30m
amateur radio band notch
3amateurBand40m
amateur radio band notch
4amateurBand80m
amateur radio band notch
5amateurBand160m
amateur radio band notch

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: vdslLineConfProfileName.

snmpwalk [connection options] DEVICE .1.3.6.1.2.1.10.97.1.1.11.1.36

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 4 distinct definitions; some records may not include a definition.

Show 4 published definitions

vdslLineConfHamBandMask · current

vdslLineConfHamBandMask OBJECT-TYPE
       SYNTAX       BITS
           {
           customNotch1(0),     -- custom (region-specific) notch
           customNotch2(1),     -- custom (region-specific) notch
           amateurBand30m(2),   -- amateur radio band notch
           amateurBand40m(3),   -- amateur radio band notch
           amateurBand80m(4),   -- amateur radio band notch
           amateurBand160m(5)   -- amateur radio band notch
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The transmit power spectral density mask code, used
           to avoid interference with HAM (Handheld Amateur Radio)
           radio bands by introducing power control (notching) in one
           or more of these bands.

           Amateur radio band notching is defined in the VDSL
           spectrum as follows:

           Band  Start Frequency     Stop Frequency
           ----  ------------------  --------------------------------
           30m   1810 kHz            2000 kHz
           40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
           80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
           160m  10100 kHz           10150 kHz









           Notching for each standard band can be enabled or disabled
           via the bit mask.

           Two custom notches may be specified.  If either of these
           are enabled via the bit mask, then the following objects
           MUST be specified:

           If customNotch1 is enabled, then both
               vdslLineConfCustomNotch1Start
               vdslLineConfCustomNotch1Stop
           MUST be specified.

           If customNotch2 is enabled, then both
               vdslLineConfCustomNotch2Start
               vdslLineConfCustomNotch2Stop
           MUST be specified."
       REFERENCE    "DSLF TR-057, section 2.6"
       DEFVAL       { { } }
       ::= { vdslLineConfProfileEntry 36 }

vdslLineConfHamBandMask · current

vdslLineConfHamBandMask OBJECT-TYPE
       SYNTAX       BITS
           {
           customNotch1(0),     -- custom (region-specific) notch
           customNotch2(1),     -- custom (region-specific) notch
           amateurBand30m(2),   -- amateur radio band notch
           amateurBand40m(3),   -- amateur radio band notch
           amateurBand80m(4),   -- amateur radio band notch
           amateurBand160m(5)   -- amateur radio band notch
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The transmit power spectral density mask code, used
           to avoid interference with HAM (Handheld Amateur Radio)
           radio bands by introducing power control (notching) in one
           or more of these bands.

           Amateur radio band notching is defined in the VDSL
           spectrum as follows:

           Band  Start Frequency     Stop Frequency
           ----  ------------------  --------------------------------
           30m   1810 kHz            2000 kHz
           40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
           80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
           160m  10100 kHz           10150 kHz

           Notching for each standard band can be enabled or disabled
           via the bit mask.

           Two custom notches may be specified.  If either of these
           are enabled via the bit mask, then the following objects
           MUST be specified:

           If customNotch1 is enabled, then both
               vdslLineConfCustomNotch1Start
               vdslLineConfCustomNotch1Stop
           MUST be specified.

           If customNotch2 is enabled, then both
               vdslLineConfCustomNotch2Start
               vdslLineConfCustomNotch2Stop
           MUST be specified."
       REFERENCE    "DSLF TR-057, section 2.6"
       DEFVAL       { { } }
       ::= { vdslLineConfProfileEntry 36 }

vdslLineConfHamBandMask · current

vdslLineConfHamBandMask OBJECT-TYPE
    SYNTAX       BITS
        {
        customNotch1(0),     -- custom (region-specific) notch
        customNotch2(1),     -- custom (region-specific) notch
        amateurBand30m(2),   -- amateur radio band notch
        amateurBand40m(3),   -- amateur radio band notch
        amateurBand80m(4),   -- amateur radio band notch
        amateurBand160m(5)   -- amateur radio band notch
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The transmit power spectral density mask code, used
        to avoid interference with HAM (Handheld Amateur Radio)
        radio bands by introducing power control (notching) in one
        or more of these bands.

        Amateur radio band notching is defined in the VDSL
        spectrum as follows:

        Band  Start Frequency     Stop Frequency
        ----  ------------------  --------------------------------
        30m   1810 kHz            2000 kHz
        40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
        80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
        160m  10100 kHz           10150 kHz



        Notching for each standard band can be enabled or disabled
        via the bit mask.

        Two custom notches may be specified.  If either of these
        are enabled via the bit mask, then the following objects
        MUST be specified:

        If customNotch1 is enabled, then both
            vdslLineConfCustomNotch1Start
            vdslLineConfCustomNotch1Stop
        MUST be specified.

        If customNotch2 is enabled, then both
            vdslLineConfCustomNotch2Start
            vdslLineConfCustomNotch2Stop
        MUST be specified."
    REFERENCE    "DSLF TR-057, section 2.6"
    DEFVAL       { { } }
    ::= { vdslLineConfProfileEntry 36 }

vdslLineConfHamBandMask · current

vdslLineConfHamBandMask OBJECT-TYPE
    SYNTAX       BITS
        {
        customNotch1(0),     -- custom (region-specific) notch
        customNotch2(1),     -- custom (region-specific) notch
        amateurBand30m(2),   -- amateur radio band notch
        amateurBand40m(3),   -- amateur radio band notch
        amateurBand80m(4),   -- amateur radio band notch
        amateurBand160m(5)   -- amateur radio band notch
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The transmit power spectral density mask code, used
        to avoid interference with HAM (Handheld Amateur Radio)
        radio bands by introducing power control (notching) in one
        or more of these bands.

        Amateur radio band notching is defined in the VDSL
        spectrum as follows:

        Band  Start Frequency     Stop Frequency
        ----  ------------------  --------------------------------
        30m   1810 kHz            2000 kHz
        40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
        80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
        160m  10100 kHz           10150 kHz

        Notching for each standard band can be enabled or disabled
        via the bit mask.

        Two custom notches may be specified.  If either of these
        are enabled via the bit mask, then the following objects
        MUST be specified:

        If customNotch1 is enabled, then both
            vdslLineConfCustomNotch1Start
            vdslLineConfCustomNotch1Stop
        MUST be specified.

        If customNotch2 is enabled, then both
            vdslLineConfCustomNotch2Start
            vdslLineConfCustomNotch2Stop
        MUST be specified."
    REFERENCE    "DSLF TR-057, section 2.6"
    DEFVAL       { { } }
    ::= { vdslLineConfProfileEntry 36 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio band notching is defined in the VDSL spectrum as follows: Band Start Frequency Stop Frequency ---- ------------------ -------------------------------- 30m 1810 kHz 2000 kHz 40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI) 80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI) 160m 10100 kHz 10150 kHz Notching for each standard band can be enabled or disabled via the bit mask. Two custom notches may be specified. If either of these are enabled via the bit mask, then the following objects MUST be specified: If customNotch1 is enabled, then both vdslLineConfCustomNotch1Start vdslLineConfCustomNotch1Stop MUST be specified. If customNotch2 is enabled, then both vdslLineConfCustomNotch2Start vdslLineConfCustomNotch2Stop MUST be specified.
Original text from OID Repository
vdslLineConfHamBandMask OBJECT-TYPE
SYNTAX BITS
{
customNotch1(0), -- custom (region-specific) notch
customNotch2(1), -- custom (region-specific) notch
amateurBand30m(2), -- amateur radio band notch
amateurBand40m(3), -- amateur radio band notch
amateurBand80m(4), -- amateur radio band notch
amateurBand160m(5) -- amateur radio band notch
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The transmit power spectral density mask code, used
to avoid interference with HAM (Handheld Amateur Radio)
radio bands by introducing power control (notching) in one
or more of these bands.
Amateur radio band notching is defined in the VDSL
spectrum as follows:
Band Start Frequency Stop Frequency
---- ------------------ --------------------------------
30m 1810 kHz 2000 kHz
40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI)
80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI)
160m 10100 kHz 10150 kHz
Notching for each standard band can be enabled or disabled
via the bit mask.
Two custom notches may be specified. If either of these
are enabled via the bit mask, then the following objects
MUST be specified:
If customNotch1 is enabled, then both
vdslLineConfCustomNotch1Start
vdslLineConfCustomNotch1Stop
MUST be specified.
If customNotch2 is enabled, then both
vdslLineConfCustomNotch2Start
vdslLineConfCustomNotch2Stop
MUST be specified."
REFERENCE "DSLF TR-057, section 2.6"
DEFVAL { { } }
Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)CircitorMIBdepotCommon and standard MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesRFC Editor

See 1 matching source record

OID Repository

View at oid-base.com
Automatically extracted from RFC3728

Description 2

The transmit power spectral density mask code, used
to avoid interference with HAM (Handheld Amateur Radio)
radio bands by introducing power control (notching) in one
or more of these bands.

Amateur radio band notching is defined in the VDSL
spectrum as follows:

Band Start Frequency Stop Frequency

30m 1810 kHz 2000 kHz
40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI)
80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI)
160m 10100 kHz 10150 kHz



Notching for each standard band can be enabled or disabled
via the bit mask.

Two custom notches may be specified. If either of these
are enabled via the bit mask, then the following objects
MUST be specified:

If customNotch1 is enabled, then both
vdslLineConfCustomNotch1Start
vdslLineConfCustomNotch1Stop
MUST be specified.

If customNotch2 is enabled, then both
vdslLineConfCustomNotch2Start
vdslLineConfCustomNotch2Stop
MUST be specified.
Sources for this description

Circitor

Parsed from VDSL-LINE-MIB.mib · VDSL-LINE-MIB

MIBdepot

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Circitor, and others1 record · 6 sources

Description 1

vdslLineConfHamBandMask · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Circitor, and others6 sources

Status in source: current.

Names: vdslLineConfHamBandMask

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "vdslLineConfHamBandMask",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "customNotch1",
    "(",
    "0",
    ")",
    ",",
    "customNotch2",
    "(",
    "1",
    ")",
    ",",
    "amateurBand30m",
    "(",
    "2",
    ")",
    ",",
    "amateurBand40m",
    "(",
    "3",
    ")",
    ",",
    "amateurBand80m",
    "(",
    "4",
    ")",
    ",",
    "amateurBand160m",
    "(",
    "5",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio band notching is defined in the VDSL spectrum as follows: Band Start Frequency Stop Frequency ---- ------------------ -------------------------------- 30m 1810 kHz 2000 kHz 40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI) 80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI) 160m 10100 kHz 10150 kHz Notching for each standard band can be enabled or disabled via the bit mask. Two custom notches may be specified. If either of these are enabled via the bit mask, then the following objects MUST be specified: If customNotch1 is enabled, then both vdslLineConfCustomNotch1Start vdslLineConfCustomNotch1Stop MUST be specified. If customNotch2 is enabled, then both vdslLineConfCustomNotch2Start vdslLineConfCustomNotch2Stop MUST be specified.\"",
    "REFERENCE",
    "\"DSLF TR-057, section 2.6\"",
    "DEFVAL",
    "{",
    "{",
    "}",
    "}",
    "::=",
    "{",
    "vdslLineConfProfileEntry",
    "36",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "customNotch1",
          0
        ],
        [
          "customNotch2",
          1
        ],
        [
          "amateurBand30m",
          2
        ],
        [
          "amateurBand40m",
          3
        ],
        [
          "amateurBand80m",
          4
        ],
        [
          "amateurBand160m",
          5
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (notching) in one or more of these bands. Amateur radio band notching is defined in the VDSL spectrum as follows: Band Start Frequency Stop Frequency ---- ------------------ -------------------------------- 30m 1810 kHz 2000 kHz 40m 3500 kHz 3800 kHz (ETSI); 4000 kHz (ANSI) 80m 7000 kHz 7100 kHz (ETSI); 7300 kHz (ANSI) 160m 10100 kHz 10150 kHz Notching for each standard band can be enabled or disabled via the bit mask. Two custom notches may be specified. If either of these are enabled via the bit mask, then the following objects MUST be specified: If customNotch1 is enabled, then both vdslLineConfCustomNotch1Start vdslLineConfCustomNotch1Stop MUST be specified. If customNotch2 is enabled, then both vdslLineConfCustomNotch2Start vdslLineConfCustomNotch2Stop MUST be specified."
    ],
    [
      "REFERENCE",
      "DSLF TR-057, section 2.6"
    ],
    null,
    null,
    [
      "DEFVAL",
      []
    ]
  ]
}

Historical records

Additional source information

Information from MIBdepot
vdslLineConfHamBandMask OBJECT-TYPE
       SYNTAX       BITS
           {
           customNotch1(0),     
           customNotch2(1),     
           amateurBand30m(2),   
           amateurBand40m(3),   
           amateurBand80m(4),   
           amateurBand160m(5)   
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "The transmit power spectral density mask code, used
           to avoid interference with HAM (Handheld Amateur Radio)
           radio bands by introducing power control (notching) in one
           or more of these bands.

           Amateur radio band notching is defined in the VDSL
           spectrum as follows:

           Band  Start Frequency     Stop Frequency
           
           30m   1810 kHz            2000 kHz
           40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
           80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
           160m  10100 kHz           10150 kHz

           Notching for each standard band can be enabled or disabled
           via the bit mask.

           Two custom notches may be specified.  If either of these
           are enabled via the bit mask, then the following objects
           MUST be specified:

           If customNotch1 is enabled, then both
               vdslLineConfCustomNotch1Start
               vdslLineConfCustomNotch1Stop
           MUST be specified.

           If customNotch2 is enabled, then both
               vdslLineConfCustomNotch2Start
               vdslLineConfCustomNotch2Stop
           MUST be specified."
       REFERENCE    "DSLF TR-057, section 2.6"
       DEFVAL       { { } }
       ::= { vdslLineConfProfileEntry 36 }
Information from Circitor
vdslLineConfHamBandMask OBJECT-TYPE
    SYNTAX       BITS
        {
        customNotch1(0),     
        customNotch2(1),     
        amateurBand30m(2),   
        amateurBand40m(3),   
        amateurBand80m(4),   
        amateurBand160m(5)   
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The transmit power spectral density mask code, used
        to avoid interference with HAM (Handheld Amateur Radio)
        radio bands by introducing power control (notching) in one
        or more of these bands.

        Amateur radio band notching is defined in the VDSL
        spectrum as follows:

        Band  Start Frequency     Stop Frequency
        
        30m   1810 kHz            2000 kHz
        40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
        80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
        160m  10100 kHz           10150 kHz



        Notching for each standard band can be enabled or disabled
        via the bit mask.

        Two custom notches may be specified.  If either of these
        are enabled via the bit mask, then the following objects
        MUST be specified:

        If customNotch1 is enabled, then both
            vdslLineConfCustomNotch1Start
            vdslLineConfCustomNotch1Stop
        MUST be specified.

        If customNotch2 is enabled, then both
            vdslLineConfCustomNotch2Start
            vdslLineConfCustomNotch2Stop
        MUST be specified."
    REFERENCE    "DSLF TR-057, section 2.6"
    DEFVAL       { { } }
    ::= { vdslLineConfProfileEntry 36 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.2)

Internet Assigned Numbers Authority

Siblings (45)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.2.1.10.97.1.1.11.1.1 vdslLineConfProfileName00 This object identifies a row in this table.

A default profile with an index of 'DEFVAL', will
always exist and its parameters wil…
1.3.6.1.2.1.10.97.1.1.11.1.2 vdslLineConfDownRateMode00 Specifies the rate selection behavior for the line
in the downstream direction.

manual(1) forces the rate to the configured…
1.3.6.1.2.1.10.97.1.1.11.1.3 vdslLineConfUpRateMode00 Specifies the rate selection behavior for the line
in the upstream direction.

manual(1) forces the rate to the configured r…
1.3.6.1.2.1.10.97.1.1.11.1.4 vdslLineConfDownMaxPwr00 Specifies the maximum aggregate downstream power
level in the range 0 to 14.5 dBm.
1.3.6.1.2.1.10.97.1.1.11.1.5 vdslLineConfUpMaxPwr00 Specifies the maximum aggregate upstream power
level in the range 0 to 14.5 dBm.
1.3.6.1.2.1.10.97.1.1.11.1.6 vdslLineConfDownMaxSnrMgn00 Specifies the maximum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.7 vdslLineConfDownMinSnrMgn00 Specifies the minimum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.8 vdslLineConfDownTargetSnrMgn00 Specifies the target downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
This is the Noise Margin t…
1.3.6.1.2.1.10.97.1.1.11.1.9 vdslLineConfUpMaxSnrMgn00 Specifies the maximum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.10 vdslLineConfUpMinSnrMgn00 Specifies the minimum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.11 vdslLineConfUpTargetSnrMgn00 Specifies the target upstream Signal/Noise Margin in
units of 0.25 dB, for a range of 0 to 31.75 dB. This
is the Noise Margin th…
1.3.6.1.2.1.10.97.1.1.11.1.12 vdslLineConfDownFastMaxDataRate00 Specifies the maximum downstream fast channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.13 vdslLineConfDownFastMinDataRate00 Specifies the minimum downstream fast channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.14 vdslLineConfDownSlowMaxDataRate00 Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.

The maximum aggregate downstream transmit s…
1.3.6.1.2.1.10.97.1.1.11.1.15 vdslLineConfDownSlowMinDataRate00 Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.

The minimum aggregate downstream transmit s…
1.3.6.1.2.1.10.97.1.1.11.1.16 vdslLineConfUpFastMaxDataRate00 Specifies the maximum upstream fast channel
data rate in steps of 1000 bits/second.

The maximum aggregate upstream transmit speed
…
1.3.6.1.2.1.10.97.1.1.11.1.17 vdslLineConfUpFastMinDataRate00 Specifies the minimum upstream fast channel
data rate in steps of 1000 bits/second.



The minimum aggregate upstream transmit speed
…
1.3.6.1.2.1.10.97.1.1.11.1.18 vdslLineConfUpSlowMaxDataRate00 Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.19 vdslLineConfUpSlowMinDataRate00 Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.20 vdslLineConfDownRateRatio00 For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is contro…
1.3.6.1.2.1.10.97.1.1.11.1.21 vdslLineConfUpRateRatio00 For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is contro…
1.3.6.1.2.1.10.97.1.1.11.1.22 vdslLineConfDownMaxInterDelay00 Specifies the maximum interleave delay for the
downstream slow channel.
1.3.6.1.2.1.10.97.1.1.11.1.23 vdslLineConfUpMaxInterDelay00 Specifies the maximum interleave delay for the
upstream slow channel.
1.3.6.1.2.1.10.97.1.1.11.1.24 vdslLineConfDownPboControl00 Downstream power backoff (PBO) control for this
line. For transceivers which do not support downstream
PBO control, this object …
1.3.6.1.2.1.10.97.1.1.11.1.25 vdslLineConfUpPboControl00 Upstream power backoff (PBO) control for this
line. For transceivers which do not support upstream
PBO control, this object MUST…
1.3.6.1.2.1.10.97.1.1.11.1.26 vdslLineConfDownPboLevel00 Specifies the downstream backoff level to be used
when vdslLineConfDownPboControl = manual(3).
1.3.6.1.2.1.10.97.1.1.11.1.27 vdslLineConfUpPboLevel00 Specifies the upstream backoff level to be used
when vdslLineConfUpPboControl = manual(3).
1.3.6.1.2.1.10.97.1.1.11.1.28 vdslLineConfDeploymentScenario00 The VDSL line deployment scenario. When using
fttCab(1), the VTU-C is located in a street cabinet.
When using fttEx(2), the VTU-…
1.3.6.1.2.1.10.97.1.1.11.1.29 vdslLineConfAdslPresence00 Indicates presence of ADSL service in the associated
cable bundle/binder.

none(1) indicates no ADSL service in the bundle
…
1.3.6.1.2.1.10.97.1.1.11.1.30 vdslLineConfApplicableStandard00 The VDSL standard to be used for the line.

ansi(1) indicates ANSI standard
etsi(2) indicates ETSI standard
itu(3) …
1.3.6.1.2.1.10.97.1.1.11.1.31 vdslLineConfBandPlan00 The VDSL band plan to be used for the line.

bandPlan997(1) is to be used for
ITU-T G.993.1 Bandplan-B
ETSI Bandplan
ANSI Plan 997

ba…
1.3.6.1.2.1.10.97.1.1.11.1.32 vdslLineConfBandPlanFx00 The frequency limit between bands D2 and U2 when
vdslLineConfBandPlan is set to bandPlanFx(3).
1.3.6.1.2.1.10.97.1.1.11.1.33 vdslLineConfBandOptUsage00 Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).

unused(1) indicates Opt is unused
upstream(2…
1.3.6.1.2.1.10.97.1.1.11.1.34 vdslLineConfUpPsdTemplate00 The upstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PS…
1.3.6.1.2.1.10.97.1.1.11.1.35 vdslLineConfDownPsdTemplate00 The downstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted …
1.3.6.1.2.1.10.97.1.1.11.1.37 vdslLineConfCustomNotch1Start00 Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST
be less than or…
1.3.6.1.2.1.10.97.1.1.11.1.38 vdslLineConfCustomNotch1Stop00 Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST
be greater than o…
1.3.6.1.2.1.10.97.1.1.11.1.39 vdslLineConfCustomNotch2Start00 Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST
be less than or…
1.3.6.1.2.1.10.97.1.1.11.1.40 vdslLineConfCustomNotch2Stop00 Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST
be greater than o…
1.3.6.1.2.1.10.97.1.1.11.1.41 vdslLineConfDownTargetSlowBurst00 Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
1.3.6.1.2.1.10.97.1.1.11.1.42 vdslLineConfUpTargetSlowBurst00 Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
1.3.6.1.2.1.10.97.1.1.11.1.43 vdslLineConfDownMaxFastFec00 This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a …
1.3.6.1.2.1.10.97.1.1.11.1.44 vdslLineConfUpMaxFastFec00 This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a …
1.3.6.1.2.1.10.97.1.1.11.1.45 vdslLineConfLineType00 This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be
channelized, i.e., wh…
1.3.6.1.2.1.10.97.1.1.11.1.46 vdslLineConfProfRowStatus00 This object is used to create a new row or modify or
delete an existing row in this table.

A profile activated by setting this ob…