| 1.3.6.1.2.1.10.97.1.1.11.1.1 |
vdslLineConfProfileName | 0 | 0 |
This object identifies a row in this table.
A default profile with an index of 'DEFVAL', will always exist and its parameters wil… |
| 1.3.6.1.2.1.10.97.1.1.11.1.2 |
vdslLineConfDownRateMode | 0 | 0 |
Specifies the rate selection behavior for the line in the downstream direction.
manual(1) forces the rate to the configured… |
| 1.3.6.1.2.1.10.97.1.1.11.1.3 |
vdslLineConfUpRateMode | 0 | 0 |
Specifies the rate selection behavior for the line in the upstream direction.
manual(1) forces the rate to the configured r… |
| 1.3.6.1.2.1.10.97.1.1.11.1.4 |
vdslLineConfDownMaxPwr | 0 | 0 |
Specifies the maximum aggregate downstream power level in the range 0 to 14.5 dBm. |
| 1.3.6.1.2.1.10.97.1.1.11.1.5 |
vdslLineConfUpMaxPwr | 0 | 0 |
Specifies the maximum aggregate upstream power level in the range 0 to 14.5 dBm. |
| 1.3.6.1.2.1.10.97.1.1.11.1.6 |
vdslLineConfDownMaxSnrMgn | 0 | 0 |
Specifies the maximum downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.2.1.10.97.1.1.11.1.8 |
vdslLineConfDownTargetSnrMgn | 0 | 0 |
Specifies the target downstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin t… |
| 1.3.6.1.2.1.10.97.1.1.11.1.9 |
vdslLineConfUpMaxSnrMgn | 0 | 0 |
Specifies the maximum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.2.1.10.97.1.1.11.1.10 |
vdslLineConfUpMinSnrMgn | 0 | 0 |
Specifies the minimum upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. |
| 1.3.6.1.2.1.10.97.1.1.11.1.11 |
vdslLineConfUpTargetSnrMgn | 0 | 0 |
Specifies the target upstream Signal/Noise Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. This is the Noise Margin th… |
| 1.3.6.1.2.1.10.97.1.1.11.1.12 |
vdslLineConfDownFastMaxDataRate | 0 | 0 |
Specifies the maximum downstream fast channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.2.1.10.97.1.1.11.1.13 |
vdslLineConfDownFastMinDataRate | 0 | 0 |
Specifies the minimum downstream fast channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.2.1.10.97.1.1.11.1.14 |
vdslLineConfDownSlowMaxDataRate | 0 | 0 |
Specifies the maximum downstream slow channel data rate in steps of 1000 bits/second.
The maximum aggregate downstream transmit s… |
| 1.3.6.1.2.1.10.97.1.1.11.1.15 |
vdslLineConfDownSlowMinDataRate | 0 | 0 |
Specifies the minimum downstream slow channel data rate in steps of 1000 bits/second.
The minimum aggregate downstream transmit s… |
| 1.3.6.1.2.1.10.97.1.1.11.1.16 |
vdslLineConfUpFastMaxDataRate | 0 | 0 |
Specifies the maximum upstream fast channel data rate in steps of 1000 bits/second.
The maximum aggregate upstream transmit speed … |
| 1.3.6.1.2.1.10.97.1.1.11.1.17 |
vdslLineConfUpFastMinDataRate | 0 | 0 |
Specifies the minimum upstream fast channel data rate in steps of 1000 bits/second.
The minimum aggregate upstream transmit speed … |
| 1.3.6.1.2.1.10.97.1.1.11.1.18 |
vdslLineConfUpSlowMaxDataRate | 0 | 0 |
Specifies the maximum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.2.1.10.97.1.1.11.1.19 |
vdslLineConfUpSlowMinDataRate | 0 | 0 |
Specifies the minimum upstream slow channel data rate in steps of 1000 bits/second. |
| 1.3.6.1.2.1.10.97.1.1.11.1.20 |
vdslLineConfDownRateRatio | 0 | 0 |
For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is contro… |
| 1.3.6.1.2.1.10.97.1.1.11.1.21 |
vdslLineConfUpRateRatio | 0 | 0 |
For dynamic rate adaptation at startup, the allocation of data rate in excess of the minimum data rate for each channel is contro… |
| 1.3.6.1.2.1.10.97.1.1.11.1.22 |
vdslLineConfDownMaxInterDelay | 0 | 0 |
Specifies the maximum interleave delay for the downstream slow channel. |
| 1.3.6.1.2.1.10.97.1.1.11.1.23 |
vdslLineConfUpMaxInterDelay | 0 | 0 |
Specifies the maximum interleave delay for the upstream slow channel. |
| 1.3.6.1.2.1.10.97.1.1.11.1.24 |
vdslLineConfDownPboControl | 0 | 0 |
Downstream power backoff (PBO) control for this line. For transceivers which do not support downstream PBO control, this object … |
| 1.3.6.1.2.1.10.97.1.1.11.1.25 |
vdslLineConfUpPboControl | 0 | 0 |
Upstream power backoff (PBO) control for this line. For transceivers which do not support upstream PBO control, this object MUST… |
| 1.3.6.1.2.1.10.97.1.1.11.1.26 |
vdslLineConfDownPboLevel | 0 | 0 |
Specifies the downstream backoff level to be used when vdslLineConfDownPboControl = manual(3). |
| 1.3.6.1.2.1.10.97.1.1.11.1.27 |
vdslLineConfUpPboLevel | 0 | 0 |
Specifies the upstream backoff level to be used when vdslLineConfUpPboControl = manual(3). |
| 1.3.6.1.2.1.10.97.1.1.11.1.28 |
vdslLineConfDeploymentScenario | 0 | 0 |
The VDSL line deployment scenario. When using fttCab(1), the VTU-C is located in a street cabinet. When using fttEx(2), the VTU-… |
| 1.3.6.1.2.1.10.97.1.1.11.1.29 |
vdslLineConfAdslPresence | 0 | 0 |
Indicates presence of ADSL service in the associated cable bundle/binder.
none(1) indicates no ADSL service in the bundle … |
| 1.3.6.1.2.1.10.97.1.1.11.1.30 |
vdslLineConfApplicableStandard | 0 | 0 |
The VDSL standard to be used for the line.
ansi(1) indicates ANSI standard etsi(2) indicates ETSI standard itu(3) … |
| 1.3.6.1.2.1.10.97.1.1.11.1.31 |
vdslLineConfBandPlan | 0 | 0 |
The VDSL band plan to be used for the line.
bandPlan997(1) is to be used for ITU-T G.993.1 Bandplan-B ETSI Bandplan ANSI Plan 997
ba… |
| 1.3.6.1.2.1.10.97.1.1.11.1.32 |
vdslLineConfBandPlanFx | 0 | 0 |
The frequency limit between bands D2 and U2 when vdslLineConfBandPlan is set to bandPlanFx(3). |
| 1.3.6.1.2.1.10.97.1.1.11.1.33 |
vdslLineConfBandOptUsage | 0 | 0 |
Defines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt).
unused(1) indicates Opt is unused upstream(2… |
| 1.3.6.1.2.1.10.97.1.1.11.1.34 |
vdslLineConfUpPsdTemplate | 0 | 0 |
The upstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted PS… |
| 1.3.6.1.2.1.10.97.1.1.11.1.35 |
vdslLineConfDownPsdTemplate | 0 | 0 |
The downstream PSD template to be used for the line. Here, templateMask1(1) refers to a notched mask that limits the transmitted … |
| 1.3.6.1.2.1.10.97.1.1.11.1.36 |
vdslLineConfHamBandMask | 0 | 0 |
The transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introd… |
| 1.3.6.1.2.1.10.97.1.1.11.1.37 |
vdslLineConfCustomNotch1Start | 0 | 0 |
Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST be less than or… |
| 1.3.6.1.2.1.10.97.1.1.11.1.38 |
vdslLineConfCustomNotch1Stop | 0 | 0 |
Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST be greater than o… |
| 1.3.6.1.2.1.10.97.1.1.11.1.39 |
vdslLineConfCustomNotch2Start | 0 | 0 |
Specifies the start frequency of custom HAM (Handheld Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST be less than or… |
| 1.3.6.1.2.1.10.97.1.1.11.1.40 |
vdslLineConfCustomNotch2Stop | 0 | 0 |
Specifies the stop frequency of custom HAM (Handheld Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST be greater than o… |
| 1.3.6.1.2.1.10.97.1.1.11.1.41 |
vdslLineConfDownTargetSlowBurst | 0 | 0 |
Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel. |
| 1.3.6.1.2.1.10.97.1.1.11.1.42 |
vdslLineConfUpTargetSlowBurst | 0 | 0 |
Specifies the target level of impulse noise (burst) protection for an interleaved (slow) channel. |
| 1.3.6.1.2.1.10.97.1.1.11.1.43 |
vdslLineConfDownMaxFastFec | 0 | 0 |
This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a … |
| 1.3.6.1.2.1.10.97.1.1.11.1.44 |
vdslLineConfUpMaxFastFec | 0 | 0 |
This parameter provisions the maximum level of Forward Error Correction (FEC) redundancy related overhead to be maintained for a … |
| 1.3.6.1.2.1.10.97.1.1.11.1.45 |
vdslLineConfLineType | 0 | 0 |
This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., wh… |
| 1.3.6.1.2.1.10.97.1.1.11.1.46 |
vdslLineConfProfRowStatus | 0 | 0 |
This object is used to create a new row or modify or delete an existing row in this table.
A profile activated by setting this ob… |