OID reference

vdslLineConfLineType

1.3.6.1.2.1.10.97.1.1.11.1.45

Description

This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be other than noChannel(1). This configuration can be activated only during start-up. Afterwards, the valu…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.2.1.10.97.1.1.11.1 (vdslLineConfProfileEntry)
Node code
45
Node name
vdslLineConfLineType
Category
SNMP management object
Numeric OID
1.3.6.1.2.1.10.97.1.1.11.1.45
URN notation
urn:oid:1.3.6.1.2.1.10.97.1.1.11.1.45
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 2 1 10 97 1 1 11 1 45}

  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
  • {iso(1) iso-organization(3) dod(6) internet(1) mgmt(2) stdmib-2(1) transmission(10) vdslMIB(97) vdslLineMib(1) vdslMibObjects(1) vdslLineConfProfileTable(11) vdslLineConfProfileEntry(1) vdslLineConfLineType(45)}
OID-IRI notation
  • /1/3/6/1/2/1/10/97/1/1/11/1/45
  • /ISO/Identified-Organization/6/1/2/1/10/97/1/1/11/1/45
  • /ISO/3/6/1/2/1/10/97/1/1/11/1/45
Named path variants
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/identified-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/org/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/org/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/org/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/org/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-identified-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-identified-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-organization/dod/internet/mgmt/mib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-organization/dod/internet/mgmt/mib/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-organization/dod/internet/mgmt/RFC1066-MIB-INTERPRETATION/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType
  • /iso/iso-organization/dod/internet/mgmt/stdmib-2/transmission/vdslMIB/vdslLineMib/vdslMibObjects/vdslLineConfProfileTable/vdslLineConfProfileEntry/vdslLineConfLineType

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
noChannel

Enumerated values

Notes below names come from selected MIB definitions.

ValueName and source notes
1noChannel
no channels exist
2fastOnly
only fast channel exists
3interleavedOnly
only interleaved channel exists
4fastOrInterleaved
either fast or interleaved channel [The following comment may refer to this or the next value: exist, but only one at a time]
5fastAndInterleaved
both fast and interleaved channels exist

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: vdslLineConfProfileName.

snmpwalk [connection options] DEVICE .1.3.6.1.2.1.10.97.1.1.11.1.45

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 5 distinct definitions; some records may not include a definition.

Show 5 published definitions

vdslLineConfLineType · current

vdslLineConfLineType OBJECT-TYPE
       SYNTAX       INTEGER
           {
           noChannel(1),         -- no channels exist
           fastOnly(2),          -- only fast channel exists
           interleavedOnly(3),   -- only interleaved channel exists
           fastOrInterleaved(4), -- either fast or interleaved channel
                                 -- exist, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "This parameter provisions the VDSL physical entity at
           start-up by defining whether and how the line will be
           channelized, i.e., which channel type(s) are supported.
           If the line is to be channelized, the value will be other
           than noChannel(1).

           This configuration can be activated only during start-up.
           Afterwards, the value of vdslLineType coincides with the
           value of vdslLineConfLineType.  Depending on this value,
           the corresponding entries in the ifTable for the
           interleaved and the fast channels are enabled or disabled
           according to the value of their ifOperStatus.

           Defined values are:









           noChannel(1)          -- no channels exist
           fastOnly(2)           -- only fast channel exists
           interleavedOnly(3)    -- only interleaved channel exists
           fastOrInterleaved(4)  -- either fast or interleaved channel
                                 -- exists, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist

           Note that 'slow' and 'interleaved' refer to the same
           channel."
       REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
       DEFVAL       { noChannel }
       ::= { vdslLineConfProfileEntry 45 }

vdslLineConfLineType · current

vdslLineConfLineType OBJECT-TYPE
       SYNTAX       INTEGER
           {
           noChannel(1),         -- no channels exist
           fastOnly(2),          -- only fast channel exists
           interleavedOnly(3),   -- only interleaved channel exists
           fastOrInterleaved(4), -- either fast or interleaved channel
                                 -- exist, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "This parameter provisions the VDSL physical entity at
           start-up by defining whether and how the line will be
           channelized, i.e., which channel type(s) are supported.
           If the line is to be channelized, the value will be other
           than noChannel(1).

           This configuration can be activated only during start-up.
           Afterwards, the value of vdslLineType coincides with the
           value of vdslLineConfLineType.  Depending on this value,
           the corresponding entries in the ifTable for the
           interleaved and the fast channels are enabled or disabled
           according to the value of their ifOperStatus.

           Defined values are:

           noChannel(1)          -- no channels exist
           fastOnly(2)           -- only fast channel exists
           interleavedOnly(3)    -- only interleaved channel exists
           fastOrInterleaved(4)  -- either fast or interleaved channel
                                 -- exists, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist

           Note that 'slow' and 'interleaved' refer to the same
           channel."
       REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
       DEFVAL       { noChannel }
       ::= { vdslLineConfProfileEntry 45 }

vdslLineConfLineType · current

vdslLineConfLineType OBJECT-TYPE
    SYNTAX       INTEGER
        {
        noChannel(1),         -- no channels exist
        fastOnly(2),          -- only fast channel exists
        interleavedOnly(3),   -- only interleaved channel exists
        fastOrInterleaved(4), -- either fast or interleaved channel
                              -- exist, but only one at a time
        fastAndInterleaved(5) -- both fast and interleaved channels
                              -- exist
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This parameter provisions the VDSL physical entity at
        start-up by defining whether and how the line will be
        channelized, i.e., which channel type(s) are supported.
        If the line is to be channelized, the value will be other
        than noChannel(1).

        This configuration can be activated only during start-up.
        Afterwards, the value of vdslLineType coincides with the
        value of vdslLineConfLineType.  Depending on this value,
        the corresponding entries in the ifTable for the
        interleaved and the fast channels are enabled or disabled
        according to the value of their ifOperStatus.

        Defined values are:



        noChannel(1)          -- no channels exist
        fastOnly(2)           -- only fast channel exists
        interleavedOnly(3)    -- only interleaved channel exists
        fastOrInterleaved(4)  -- either fast or interleaved channel
                              -- exists, but only one at a time
        fastAndInterleaved(5) -- both fast and interleaved channels
                              -- exist

        Note that 'slow' and 'interleaved' refer to the same
        channel."
    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
    DEFVAL       { noChannel }
    ::= { vdslLineConfProfileEntry 45 }

vdslLineConfLineType · current

vdslLineConfLineType OBJECT-TYPE
    SYNTAX       INTEGER
        {
        noChannel(1),         -- no channels exist
        fastOnly(2),          -- only fast channel exists
        interleavedOnly(3),   -- only interleaved channel exists
        fastOrInterleaved(4), -- either fast or interleaved channel
                              -- exist, but only one at a time
        fastAndInterleaved(5) -- both fast and interleaved channels
                              -- exist
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This parameter provisions the VDSL physical entity at
        start-up by defining whether and how the line will be
        channelized, i.e., which channel type(s) are supported.
        If the line is to be channelized, the value will be other
        than noChannel(1).

        This configuration can be activated only during start-up.
        Afterwards, the value of vdslLineType coincides with the
        value of vdslLineConfLineType.  Depending on this value,
        the corresponding entries in the ifTable for the
        interleaved and the fast channels are enabled or disabled
        according to the value of their ifOperStatus.

        Defined values are:

        noChannel(1)          -- no channels exist
        fastOnly(2)           -- only fast channel exists
        interleavedOnly(3)    -- only interleaved channel exists
        fastOrInterleaved(4)  -- either fast or interleaved channel
                              -- exists, but only one at a time
        fastAndInterleaved(5) -- both fast and interleaved channels
                              -- exist

        Note that 'slow' and 'interleaved' refer to the same
        channel."
    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
    DEFVAL       { noChannel }
    ::= { vdslLineConfProfileEntry 45 }

vdslLineConfLineType · current

vdslLineConfLineType OBJECT-TYPE
       SYNTAX       INTEGER
           {
           noChannel(1),         -- no channels exist
           fastOnly(2),          -- only fast channel exists
           interleavedOnly(3),   -- only interleaved channel exists
           fastOrInterleaved(4), -- either fast or interleaved channel
                                 -- exist, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "This parameter provisions the VDSL physical entity at
           start-up by defining whether and how the line will be
           channelized, i.e., which channel type(s) are supported.
           If the line is to be channelized, the value will be other
           than noChannel(1).

           This configuration can be activated only during start-up.
           Afterwards, the value of vdslLineType coincides with the
           value of vdslLineConfLineType.  Depending on this value,
           the corresponding entries in the ifTable for the
           interleaved and the fast channels are enabled or disabled
           according to the value of their ifOperStatus.

           Defined values are:
           noChannel(1)          -- no channels exist
           fastOnly(2)           -- only fast channel exists
           interleavedOnly(3)    -- only interleaved channel exists
           fastOrInterleaved(4)  -- either fast or interleaved channel
                                 -- exists, but only one at a time
           fastAndInterleaved(5) -- both fast and interleaved channels
                                 -- exist

           Note that 'slow' and 'interleaved' refer to the same
           channel."
       REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
       DEFVAL       { noChannel }
       ::= { vdslLineConfProfileEntry 45 }

Meaning

Descriptions

3 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be other than noChannel(1). This configuration can be activated only during start-up. Afterwards, the value of vdslLineType coincides with the value of vdslLineConfLineType. Depending on this value, the corresponding entries in the iftable for the interleaved and the fast channels are enabled or disabled according to the value of their ifOperStatus. Defined values are: noChannel(1) -- no channels exist fastOnly(2) -- only fast channel exists interleavedOnly(3) -- only interleaved channel exists fastOrInterleaved(4) -- either fast or interleaved channel -- exists, but only one at a time fastAndInterleaved(5) -- both fast and interleaved channels -- exist Note that slow and interleaved refer to the same channel.
Original text from OID Repository
vdslLineConfLineType OBJECT-TYPE
SYNTAX INTEGER
{
noChannel(1), -- no channels exist
fastOnly(2), -- only fast channel exists
interleavedOnly(3), -- only interleaved channel exists
fastOrInterleaved(4), -- either fast or interleaved channel
-- exist, but only one at a time
fastAndInterleaved(5) -- both fast and interleaved channels
-- exist
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be
channelized, i.e., which channel type(s) are supported.
If the line is to be channelized, the value will be other
than noChannel(1).
This configuration can be activated only during start-up.
Afterwards, the value of vdslLineType coincides with the
value of vdslLineConfLineType. Depending on this value,
the corresponding entries in the iftable for the
interleaved and the fast channels are enabled or disabled
according to the value of their ifOperStatus.
Defined values are:
noChannel(1) -- no channels exist
fastOnly(2) -- only fast channel exists
interleavedOnly(3) -- only interleaved channel exists
fastOrInterleaved(4) -- either fast or interleaved channel
-- exists, but only one at a time
fastAndInterleaved(5) -- both fast and interleaved channels
-- exist
Note that slow and interleaved refer to the same
channel."
REFERENCE "T1E1.4/2000-009R3, Part 1, common spec"
DEFVAL { noChannel }
Sources for this description

OID Repository

View at oid-base.com
Automatically extracted from RFC3728

Description 2

This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be
channelized, i.e., which channel type(s) are supported.
If the line is to be channelized, the value will be other
than noChannel(1).

This configuration can be activated only during start-up.
Afterwards, the value of vdslLineType coincides with the
value of vdslLineConfLineType. Depending on this value,
the corresponding entries in the ifTable for the
interleaved and the fast channels are enabled or disabled
according to the value of their ifOperStatus.

Defined values are:



noChannel(1)
fastOnly(2)
interleavedOnly(3)
fastOrInterleaved(4)

fastAndInterleaved(5)


Note that 'slow' and 'interleaved' refer to the same
channel.
Sources for this description

Circitor

Parsed from VDSL-LINE-MIB.mib · VDSL-LINE-MIB

MIBdepot

Description 3

This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be other than noChannel(1). This configuration can be activated only during start-up. Afterwards, the value of vdslLineType coincides with the value of vdslLineConfLineType. Depending on this value, the corresponding entries in the ifTable for the interleaved and the fast channels are enabled or disabled according to the value of their ifOperStatus. Defined values are: noChannel(1) -- no channels exist fastOnly(2) -- only fast channel exists interleavedOnly(3) -- only interleaved channel exists fastOrInterleaved(4) -- either fast or interleaved channel -- exists, but only one at a time fastAndInterleaved(5) -- both fast and interleaved channels -- exist Note that 'slow' and 'interleaved' refer to the same channel.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)CircitorMIBdepotCommon and standard MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesRFC Editor

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 3Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Circitor, and others1 record · 6 sources

Description 3

vdslLineConfLineType · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Circitor, and others6 sources

Status in source: current.

Names: vdslLineConfLineType

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "vdslLineConfLineType",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noChannel",
    "(",
    "1",
    ")",
    ",",
    "fastOnly",
    "(",
    "2",
    ")",
    ",",
    "interleavedOnly",
    "(",
    "3",
    ")",
    ",",
    "fastOrInterleaved",
    "(",
    "4",
    ")",
    ",",
    "fastAndInterleaved",
    "(",
    "5",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be other than noChannel(1). This configuration can be activated only during start-up. Afterwards, the value of vdslLineType coincides with the value of vdslLineConfLineType. Depending on this value, the corresponding entries in the ifTable for the interleaved and the fast channels are enabled or disabled according to the value of their ifOperStatus. Defined values are: noChannel(1) -- no channels exist fastOnly(2) -- only fast channel exists interleavedOnly(3) -- only interleaved channel exists fastOrInterleaved(4) -- either fast or interleaved channel -- exists, but only one at a time fastAndInterleaved(5) -- both fast and interleaved channels -- exist Note that 'slow' and 'interleaved' refer to the same channel.\"",
    "REFERENCE",
    "\"T1E1.4/2000-009R3, Part 1, common spec\"",
    "DEFVAL",
    "{",
    "noChannel",
    "}",
    "::=",
    "{",
    "vdslLineConfProfileEntry",
    "45",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noChannel",
            1
          ],
          [
            "fastOnly",
            2
          ],
          [
            "interleavedOnly",
            3
          ],
          [
            "fastOrInterleaved",
            4
          ],
          [
            "fastAndInterleaved",
            5
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This parameter provisions the VDSL physical entity at start-up by defining whether and how the line will be channelized, i.e., which channel type(s) are supported. If the line is to be channelized, the value will be other than noChannel(1). This configuration can be activated only during start-up. Afterwards, the value of vdslLineType coincides with the value of vdslLineConfLineType. Depending on this value, the corresponding entries in the ifTable for the interleaved and the fast channels are enabled or disabled according to the value of their ifOperStatus. Defined values are: noChannel(1) -- no channels exist fastOnly(2) -- only fast channel exists interleavedOnly(3) -- only interleaved channel exists fastOrInterleaved(4) -- either fast or interleaved channel -- exists, but only one at a time fastAndInterleaved(5) -- both fast and interleaved channels -- exist Note that 'slow' and 'interleaved' refer to the same channel."
    ],
    [
      "REFERENCE",
      "T1E1.4/2000-009R3, Part 1, common spec"
    ],
    null,
    null,
    [
      "DEFVAL",
      "noChannel"
    ]
  ]
}

Historical records

Additional source information

Information from MIBdepot
vdslLineConfLineType OBJECT-TYPE
       SYNTAX       INTEGER
           {
           noChannel(1),         
           fastOnly(2),          
           interleavedOnly(3),   
           fastOrInterleaved(4), 
                                 
           fastAndInterleaved(5) 
                                 
           }
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
           "This parameter provisions the VDSL physical entity at
           start-up by defining whether and how the line will be
           channelized, i.e., which channel type(s) are supported.
           If the line is to be channelized, the value will be other
           than noChannel(1).

           This configuration can be activated only during start-up.
           Afterwards, the value of vdslLineType coincides with the
           value of vdslLineConfLineType.  Depending on this value,
           the corresponding entries in the ifTable for the
           interleaved and the fast channels are enabled or disabled
           according to the value of their ifOperStatus.

           Defined values are:

           noChannel(1)          
           fastOnly(2)           
           interleavedOnly(3)    
           fastOrInterleaved(4)  
                                 
           fastAndInterleaved(5) 
                                 

           Note that 'slow' and 'interleaved' refer to the same
           channel."
       REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
       DEFVAL       { noChannel }
       ::= { vdslLineConfProfileEntry 45 }
Information from Circitor
vdslLineConfLineType OBJECT-TYPE
    SYNTAX       INTEGER
        {
        noChannel(1),         
        fastOnly(2),          
        interleavedOnly(3),   
        fastOrInterleaved(4), 
                              
        fastAndInterleaved(5) 
                              
        }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This parameter provisions the VDSL physical entity at
        start-up by defining whether and how the line will be
        channelized, i.e., which channel type(s) are supported.
        If the line is to be channelized, the value will be other
        than noChannel(1).

        This configuration can be activated only during start-up.
        Afterwards, the value of vdslLineType coincides with the
        value of vdslLineConfLineType.  Depending on this value,
        the corresponding entries in the ifTable for the
        interleaved and the fast channels are enabled or disabled
        according to the value of their ifOperStatus.

        Defined values are:



        noChannel(1)          
        fastOnly(2)           
        interleavedOnly(3)    
        fastOrInterleaved(4)  
                              
        fastAndInterleaved(5) 
                              

        Note that 'slow' and 'interleaved' refer to the same
        channel."
    REFERENCE    "T1E1.4/2000-009R3, Part 1, common spec"
    DEFVAL       { noChannel }
    ::= { vdslLineConfProfileEntry 45 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6)

Defense Communication Agency

Current Registration Authority (inferred from ancestor 1.3.6.1.2)

Internet Assigned Numbers Authority

Siblings (45)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.2.1.10.97.1.1.11.1.1 vdslLineConfProfileName00 This object identifies a row in this table.

A default profile with an index of 'DEFVAL', will
always exist and its parameters wil…
1.3.6.1.2.1.10.97.1.1.11.1.2 vdslLineConfDownRateMode00 Specifies the rate selection behavior for the line
in the downstream direction.

manual(1) forces the rate to the configured…
1.3.6.1.2.1.10.97.1.1.11.1.3 vdslLineConfUpRateMode00 Specifies the rate selection behavior for the line
in the upstream direction.

manual(1) forces the rate to the configured r…
1.3.6.1.2.1.10.97.1.1.11.1.4 vdslLineConfDownMaxPwr00 Specifies the maximum aggregate downstream power
level in the range 0 to 14.5 dBm.
1.3.6.1.2.1.10.97.1.1.11.1.5 vdslLineConfUpMaxPwr00 Specifies the maximum aggregate upstream power
level in the range 0 to 14.5 dBm.
1.3.6.1.2.1.10.97.1.1.11.1.6 vdslLineConfDownMaxSnrMgn00 Specifies the maximum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.7 vdslLineConfDownMinSnrMgn00 Specifies the minimum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.8 vdslLineConfDownTargetSnrMgn00 Specifies the target downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
This is the Noise Margin t…
1.3.6.1.2.1.10.97.1.1.11.1.9 vdslLineConfUpMaxSnrMgn00 Specifies the maximum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.10 vdslLineConfUpMinSnrMgn00 Specifies the minimum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
1.3.6.1.2.1.10.97.1.1.11.1.11 vdslLineConfUpTargetSnrMgn00 Specifies the target upstream Signal/Noise Margin in
units of 0.25 dB, for a range of 0 to 31.75 dB. This
is the Noise Margin th…
1.3.6.1.2.1.10.97.1.1.11.1.12 vdslLineConfDownFastMaxDataRate00 Specifies the maximum downstream fast channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.13 vdslLineConfDownFastMinDataRate00 Specifies the minimum downstream fast channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.14 vdslLineConfDownSlowMaxDataRate00 Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.

The maximum aggregate downstream transmit s…
1.3.6.1.2.1.10.97.1.1.11.1.15 vdslLineConfDownSlowMinDataRate00 Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.

The minimum aggregate downstream transmit s…
1.3.6.1.2.1.10.97.1.1.11.1.16 vdslLineConfUpFastMaxDataRate00 Specifies the maximum upstream fast channel
data rate in steps of 1000 bits/second.

The maximum aggregate upstream transmit speed
…
1.3.6.1.2.1.10.97.1.1.11.1.17 vdslLineConfUpFastMinDataRate00 Specifies the minimum upstream fast channel
data rate in steps of 1000 bits/second.



The minimum aggregate upstream transmit speed
…
1.3.6.1.2.1.10.97.1.1.11.1.18 vdslLineConfUpSlowMaxDataRate00 Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.19 vdslLineConfUpSlowMinDataRate00 Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second.
1.3.6.1.2.1.10.97.1.1.11.1.20 vdslLineConfDownRateRatio00 For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is contro…
1.3.6.1.2.1.10.97.1.1.11.1.21 vdslLineConfUpRateRatio00 For dynamic rate adaptation at startup, the allocation
of data rate in excess of the minimum data rate for each
channel is contro…
1.3.6.1.2.1.10.97.1.1.11.1.22 vdslLineConfDownMaxInterDelay00 Specifies the maximum interleave delay for the
downstream slow channel.
1.3.6.1.2.1.10.97.1.1.11.1.23 vdslLineConfUpMaxInterDelay00 Specifies the maximum interleave delay for the
upstream slow channel.
1.3.6.1.2.1.10.97.1.1.11.1.24 vdslLineConfDownPboControl00 Downstream power backoff (PBO) control for this
line. For transceivers which do not support downstream
PBO control, this object …
1.3.6.1.2.1.10.97.1.1.11.1.25 vdslLineConfUpPboControl00 Upstream power backoff (PBO) control for this
line. For transceivers which do not support upstream
PBO control, this object MUST…
1.3.6.1.2.1.10.97.1.1.11.1.26 vdslLineConfDownPboLevel00 Specifies the downstream backoff level to be used
when vdslLineConfDownPboControl = manual(3).
1.3.6.1.2.1.10.97.1.1.11.1.27 vdslLineConfUpPboLevel00 Specifies the upstream backoff level to be used
when vdslLineConfUpPboControl = manual(3).
1.3.6.1.2.1.10.97.1.1.11.1.28 vdslLineConfDeploymentScenario00 The VDSL line deployment scenario. When using
fttCab(1), the VTU-C is located in a street cabinet.
When using fttEx(2), the VTU-…
1.3.6.1.2.1.10.97.1.1.11.1.29 vdslLineConfAdslPresence00 Indicates presence of ADSL service in the associated
cable bundle/binder.

none(1) indicates no ADSL service in the bundle
…
1.3.6.1.2.1.10.97.1.1.11.1.30 vdslLineConfApplicableStandard00 The VDSL standard to be used for the line.

ansi(1) indicates ANSI standard
etsi(2) indicates ETSI standard
itu(3) …
1.3.6.1.2.1.10.97.1.1.11.1.31 vdslLineConfBandPlan00 The VDSL band plan to be used for the line.

bandPlan997(1) is to be used for
ITU-T G.993.1 Bandplan-B
ETSI Bandplan
ANSI Plan 997

ba…
1.3.6.1.2.1.10.97.1.1.11.1.32 vdslLineConfBandPlanFx00 The frequency limit between bands D2 and U2 when
vdslLineConfBandPlan is set to bandPlanFx(3).
1.3.6.1.2.1.10.97.1.1.11.1.33 vdslLineConfBandOptUsage00 Defines the VDSL link use of the optional frequency
range [25kHz - 138kHz] (Opt).

unused(1) indicates Opt is unused
upstream(2…
1.3.6.1.2.1.10.97.1.1.11.1.34 vdslLineConfUpPsdTemplate00 The upstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted PS…
1.3.6.1.2.1.10.97.1.1.11.1.35 vdslLineConfDownPsdTemplate00 The downstream PSD template to be used for the line.
Here, templateMask1(1) refers to a notched mask that
limits the transmitted …
1.3.6.1.2.1.10.97.1.1.11.1.36 vdslLineConfHamBandMask00 The transmit power spectral density mask code, used
to avoid interference with HAM (Handheld Amateur Radio)
radio bands by introd…
1.3.6.1.2.1.10.97.1.1.11.1.37 vdslLineConfCustomNotch1Start00 Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 1. vdslLineConfCustomNotch1Start MUST
be less than or…
1.3.6.1.2.1.10.97.1.1.11.1.38 vdslLineConfCustomNotch1Stop00 Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 1. vdslLineConfCustomNotch1Stop MUST
be greater than o…
1.3.6.1.2.1.10.97.1.1.11.1.39 vdslLineConfCustomNotch2Start00 Specifies the start frequency of custom HAM (Handheld
Amateur Radio) notch 2. vdslLineConfCustomNotch2Start MUST
be less than or…
1.3.6.1.2.1.10.97.1.1.11.1.40 vdslLineConfCustomNotch2Stop00 Specifies the stop frequency of custom HAM (Handheld
Amateur Radio) notch 2. vdslLineConfCustomNotch2Stop MUST
be greater than o…
1.3.6.1.2.1.10.97.1.1.11.1.41 vdslLineConfDownTargetSlowBurst00 Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
1.3.6.1.2.1.10.97.1.1.11.1.42 vdslLineConfUpTargetSlowBurst00 Specifies the target level of impulse noise (burst)
protection for an interleaved (slow) channel.
1.3.6.1.2.1.10.97.1.1.11.1.43 vdslLineConfDownMaxFastFec00 This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a …
1.3.6.1.2.1.10.97.1.1.11.1.44 vdslLineConfUpMaxFastFec00 This parameter provisions the maximum level of Forward
Error Correction (FEC) redundancy related overhead to
be maintained for a …
1.3.6.1.2.1.10.97.1.1.11.1.46 vdslLineConfProfRowStatus00 This object is used to create a new row or modify or
delete an existing row in this table.

A profile activated by setting this ob…