arcNalmTimeRemaining OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the time remaining in the nalmTI state
or the nalmQICD state, in units of second.
At the moment the resource enters the nalmTI state, this variable
will have the initial value equal to the value of
arcNalmTITimeInterval and then starts decrementing as time goes by.
Similarly at the moment the resource enters the nalmQICD state,
this variable will have the initial value equal to the value of
arcNalmCDTimeInterval and then starts decrementing as time goes by.
This variable is read-create and thus will allow the manager to
write (extend or shorten), as needed, the remaining time when the
resource is in the nalmTI or nalmQICD state.
If this variable is supported and the resource is currently not in
the nalmTI nor nalmQICD state, the value of this variable shall
equal to zero."
View at oid-info.com
This variable indicates the time interval used for nalmQICD,
in units of second.
Parsed from file rfc3878-Alarm-Reporting-Control.mib.txt
Company: None
Module: ARC-MIB
This variable indicates the time remaining in the nalmTI state
or the nalmQICD state, in units of second.
At the moment the resource enters the nalmTI state, this variable
will have the initial value equal to the value of
arcNalmTITimeInterval and then starts decrementing as time goes by.
Similarly at the moment the resource enters the nalmQICD state,
this variable will have the initial value equal to the value of
arcNalmCDTimeInterval and then starts decrementing as time goes by.
This variable is read-create and thus will allow the manager to
write (extend or shorten), as needed, the remaining time when the
resource is in the nalmTI or nalmQICD state.
If this variable is supported and the resource is currently not in
the nalmTI nor nalmQICD state, the value of this variable shall
equal to zero.
Parsed from file ARC-MIB.mib
Module: ARC-MIB
Automatically extracted from RFC3878
arcNalmCDTimeInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the time interval used for nalmQICD, in units of second." ::= { arcEntry 5 }
arcNalmTimeRemaining OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "This variable indicates the time remaining in the nalmTI state or the nalmQICD state, in units of second. At the moment the resource enters the nalmTI state, this variable will have the initial value equal to the value of arcNalmTITimeInterval and then starts decrementing as time goes by. Similarly at the moment the resource enters the nalmQICD state, this variable will have the initial value equal to the value of arcNalmCDTimeInterval and then starts decrementing as time goes by. This variable is read-create and thus will allow the manager to write (extend or shorten), as needed, the remaining time when the resource is in the nalmTI or nalmQICD state. If this variable is supported and the resource is currently not in the nalmTI nor nalmQICD state, the value of this variable shall equal to zero." ::= { arcEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.117.2.1.1.1 | arcIndex | 0 | 0 | This object uniquely identifies a resource, which is under the arcState's control for the associated arcAlarmType. For example, i… |
| 1.3.6.1.2.1.117.2.1.1.2 | arcAlarmType | 0 | 0 | This object identifies the alarm condition type controlled by the arcState. It specifies the value 0 or a value of IANAItuProbab… |
| 1.3.6.1.2.1.117.2.1.1.3 | arcNotificationId, arcState | 0 | 0 | This object identifies the type of notification to be suppressed. The notification type identified should be the one normally us… |
| 1.3.6.1.2.1.117.2.1.1.4 | arcState, arcNalmTITimeInterval | 0 | 0 | This variable indicates the time interval used for nalmTI, in units of second. |
| 1.3.6.1.2.1.117.2.1.1.6 | arcRowStatus, arcNalmTimeRemaining | 0 | 0 | This columnar object is used for creating and deleting a conceptual row of the arcTable. It is used to create and delete an arc… |
| 1.3.6.1.2.1.117.2.1.1.7 | arcStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' must allow write-access at a minimum to ar… |